KOR K20634

KOR 9W LED A19 Light Bulb Instruction Manual

Model: K20634

Introduction

This manual provides essential information for the safe and efficient use of your KOR 9W LED A19 Light Bulbs. These bulbs are designed as a 60W equivalent, non-dimmable lighting solution, providing 750 lumens of bright daylight (5000K) illumination. Featuring a standard E26 base and a long lifespan of 15,000 hours, they are UL Listed for safety and reliability.

Product Features

Energy Efficient: 9-watt LED bulb provides light equivalent to a 60-watt incandescent bulb, significantly reducing energy consumption.
High Brightness: Delivers 750 lumens of light output.
Daylight Color Temperature: Features a 5000K (Bright White - Daylight) color, creating a clear and vibrant ambiance.
Standard Base: Equipped with a common E26 medium screw base for wide compatibility with existing fixtures.
Long Lifespan: Engineered for an average life of 15,000 hours, ensuring long-lasting performance.
Instant-On: Provides full brightness immediately upon switching on.
Non-Dimmable: Designed for on/off operation only; not compatible with dimmer switches.
UL Listed: Certified for safety and quality standards.
Flicker-Free: Designed to provide stable illumination without noticeable flicker.

Safety Information

Please read and understand all safety instructions before installing or using the light bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.

Risk of Electric Shock: Always turn off the power to the fixture and allow the bulb to cool before replacing.
Not for Dimmers: These bulbs are non-dimmable. Do not use with dimmer switches, as this may damage the bulb or the dimmer.
Indoor Use Only: Designed for indoor applications. Do not use in wet locations or enclosed fixtures unless specified.
Proper Voltage: Ensure the fixture's voltage matches the bulb's specified voltage (120 Volts).
Handle with Care: Avoid dropping or subjecting the bulbs to excessive force.
Disposal: Dispose of bulbs according to local regulations.

Setup and Installation

Installing your KOR LED A19 light bulb is a simple process. Follow these steps for proper installation:

Turn Off Power: Before installation, ensure the power to the light fixture is turned off at the circuit breaker or wall switch.
Remove Old Bulb: Carefully unscrew the old light bulb from the fixture. Allow it to cool if it has been recently in use.
Insert New Bulb: Gently screw the KOR 9W LED A19 bulb into the E26 medium screw base socket until it is finger-tight. Do not overtighten.
Restore Power: Turn the power back on at the circuit breaker or wall switch.
Verify Operation: Flip the light switch to confirm the bulb is working correctly.

Close-up of KOR LED A19 bulb showing the E26 medium screw base and its dimensions. — Figure 1: The E26 medium screw base, a standard household base compatible with most fixtures. Base diameter is 1.02 inches (26 mm).

Hand screwing a KOR LED A19 bulb into a pendant light fixture, with an old incandescent bulb in the foreground. — Figure 2: Simple installation of the LED A19 bulb. This 9-watt bulb provides 750 lumens of 5000K daylight illumination at 120 volts.

Operating Instructions

The KOR 9W LED A19 Light Bulbs are designed for straightforward operation.

Once installed, simply use your existing wall switch to turn the light on or off.
These bulbs provide instant-on illumination, reaching full brightness immediately.
As these are non-dimmable bulbs, they should only be used in fixtures controlled by a standard on/off switch.

A power button icon with the word 'ELEGANT' below it, superimposed on an image of a modern kitchen with pendant lights. — Figure 3: The KOR LED A19 bulbs offer an elegant lighting solution for various indoor spaces.

A light bulb icon with the words 'INSTANT ON' below it, superimposed on an image of a vanity mirror with multiple light bulbs. — Figure 4: Enjoy instant illumination with KOR LED A19 bulbs, perfect for areas requiring immediate light.

Maintenance

KOR LED A19 light bulbs require minimal maintenance due to their long lifespan and durable design.

Cleaning: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Replacement: Replace bulbs only after they have cooled down completely.
Storage: If storing unused bulbs, keep them in their original packaging in a cool, dry place to protect them from damage.

Troubleshooting

If you encounter issues with your KOR LED A19 light bulb, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Bulb does not light up.	No power to the fixture. Bulb not screwed in properly. Bulb is faulty.	Check circuit breaker and wall switch. Ensure bulb is securely screwed into the socket. Try the bulb in a different, working fixture. If it still doesn't light, replace the bulb.
Bulb flickers.	Used with a dimmer switch. Loose connection. Incompatible fixture.	These bulbs are non-dimmable. Remove from dimmer-controlled fixtures. Ensure bulb is tightly screwed in. Verify the fixture is compatible with non-dimmable LED bulbs.
Light is too dim or too bright.	Incorrect lumen output chosen for the space.	These bulbs provide 750 lumens. If different brightness is desired, consider bulbs with higher or lower lumen ratings.

An eye icon with the words 'FLICKER FREE' below it, superimposed on an image of a woman studying at a desk with a pendant light. — Figure 5: KOR LED A19 bulbs are designed to be flicker-free, providing comfortable lighting for tasks like studying.

Specifications

Attribute	Detail
Brand	KOR
Model Number	K20634
Light Type	LED
Wattage	9 Watts
Incandescent Equivalent	60 Watts
Bulb Shape Size	A19
Bulb Base	E26 (Standard US Base)
Brightness	750 Lumens
Color Temperature	5000 Kelvin (Daylight White)
Voltage	120 Volts
Average Life	15,000 Hours
Special Feature	Non-Dimmable, Instant On
Certification	UL Listed
Product Dimensions	2.36"W x 4.09"H
Item Weight	7.4 ounces (per bulb, approx.)
Material	Iron
Indoor/Outdoor Usage	Indoor

Diagram showing the dimensions of a KOR LED A19 bulb: 2.36 inches width and 4.09 inches height. — Figure 6: Detailed dimensions of the KOR LED A19 bulb.

Warranty and Support

For any questions, technical assistance, or support regarding your KOR LED A19 Light Bulbs, please contact the seller or manufacturer directly. While specific warranty details are not provided in this manual, most lighting products come with a standard manufacturer's warranty against defects in materials and workmanship.

Please retain your purchase receipt as proof of purchase for any warranty claims.

For further assistance, you may visit the KOR Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.