CHARGEWORX Magnetic Car Phone Mount

1. Introduction

The CHARGEWORX Magnetic Car Phone Mount (Model CX9902BK) provides a secure and convenient way to hold your smartphone in your vehicle. Designed for air vent installation, this mount features a strong magnetic grip and 360-degree rotation, allowing for optimal viewing angles while driving. It is compatible with a wide range of smartphones, including iPhone, Samsung, and other Android devices, using the included metal plates.

2. Package Contents

Please verify that all items are present in your package:

• 1 x CHARGEWORX Magnetic Air Vent Mount
• 2 x Metal Plates (one rectangular, one circular)

Image: The package includes two metal plates, one rectangular and one circular, for attachment to your device or case.

3. Setup Instructions

3.1 Attaching the Metal Plate to Your Device

For the magnetic mount to function, a metal plate must be attached to your smartphone or its case. Choose the method that best suits your preference:

1. Directly to Phone: Clean the back of your phone thoroughly. Remove the adhesive backing from one of the metal plates and firmly press it onto the center of your phone's back.
2. Inside Phone Case: Place the metal plate between your phone and its case. Ensure the plate is positioned centrally for optimal magnetic connection. This method allows for easy removal of the plate without adhesive residue on your phone.
3. Outside Phone Case: Clean the back of your phone case. Remove the adhesive backing from one of the metal plates and firmly press it onto the center of your phone case's exterior.

Note: For wireless charging compatibility, ensure the metal plate does not obstruct the wireless charging coil area on your phone.

Image: The magnetic mount and a metal plate demonstrating the magnetic connection.

3.2 Installing the Mount on Your Car's Air Vent

The CHARGEWORX Magnetic Car Phone Mount is designed for compatibility with horizontal, vertical, and angled air vent louvers.

1. Identify a suitable air vent in your vehicle that provides a clear view and does not obstruct driving.
2. Gently push the vent clip of the magnetic mount onto one of the air vent louvers. Ensure the clip is securely seated and the mount feels stable.
3. Adjust the mount's position to ensure it is level and provides an unobstructed view of your device once attached.

Image: Diagram illustrating the mount's components (360° rotation, magnetic mount, vent clip, sturdy rubber base) and compatibility with various vent types (horizontal, vertical, angled).

Image: The magnetic phone mount securely installed in a car's air vent, holding a smartphone.

4. Operating Instructions

4.1 Attaching Your Smartphone

Once the metal plate is attached to your device/case and the mount is installed on the air vent:

1. Hold your smartphone close to the magnetic surface of the mount.
2. The strong magnets will automatically attract and secure your phone in place.

4.2 Adjusting Viewing Angle

The mount features a 360-degree rotating base, allowing you to adjust your phone's orientation:

• Gently rotate your phone while it is attached to the mount to switch between portrait and landscape views.
• Tilt the phone to achieve your desired viewing angle for navigation, calls, or media.

Image: A smartphone securely held by the magnetic car vent mount, demonstrating its use.

5. Maintenance

• Cleaning: Wipe the mount with a soft, dry cloth to remove dust or smudges. Do not use harsh chemicals or abrasive cleaners.
• Vent Clip Check: Periodically check the air vent clip for any signs of wear or damage to ensure it remains securely attached to your car's vent.
• Magnetic Surface: Keep the magnetic surface free of debris to ensure a strong connection with your phone's metal plate.

6. Troubleshooting

7. Specifications

8. Warranty & Support

For warranty information or technical support, please refer to the product packaging or contact CHARGEWORX customer service directly. Contact details can typically be found on the manufacturer's official website or on the product's retail packaging.