MONZANA® 3x 20L Metal Jerry Cans with Spout Instruction Manual

Introduction

Thank you for choosing the MONZANA® 3x 20L Metal Jerry Cans with Spout. These robust and reliable fuel containers are designed for the safe transport and storage of various fuels, including gasoline, diesel, and oil. Manufactured from cold-rolled steel and featuring UN approval, these jerry cans ensure durability and compliance with dangerous goods regulations. This manual provides essential information for the proper setup, operation, maintenance, and safety of your new jerry cans.

Image: The Monzana 20L metal jerry can is suitable for various applications, including refueling vehicles, motorcycles, lawnmowers, and ATVs.

Safety Information

WARNING: Fuel is highly flammable and can cause serious injury or death if not handled properly. Always follow these safety guidelines:

• Store fuel in a well-ventilated area, away from direct sunlight, heat sources, sparks, and open flames.
• Keep out of reach of children and pets.
• Do not smoke while handling fuel.
• Always wear appropriate personal protective equipment (PPE), such as gloves and eye protection, when handling fuel.
• Ensure the jerry can is securely closed with the bayonet closure and safety pin before transport or storage to prevent leaks.
• Never overfill the jerry can. Leave adequate space for fuel expansion.
• In case of spills, immediately clean up with absorbent materials and dispose of them properly.
• These jerry cans are UN approved for transport according to dangerous goods regulations. Ensure local regulations are also followed.
• Do not use for drinking water or other non-fuel liquids.

Package Contents

Verify that all items are present and undamaged upon unpacking:

• 3x Monzana 20L Metal Jerry Cans (UN approved)
• 3x Bayonet Closures with Safety Stirrup
• 1x Steel Pouring Spout
• 1x Spout Extension

Image: The included steel pouring spout facilitates easy and controlled fuel transfer.

Setup

Before first use, inspect each jerry can and the pouring spout for any damage. Ensure the interior is clean and free of debris.

1. Attaching the Pouring Spout:
   • Remove the bayonet closure from the jerry can by lifting the safety stirrup and rotating the cap.
   • Align the pouring spout with the jerry can's opening.
   • Secure the spout by engaging its locking mechanism with the jerry can's collar, similar to how the bayonet closure is attached. Ensure it is firmly seated and locked to prevent leaks during pouring.
   • If needed, attach the spout extension to the end of the pouring spout for reaching difficult tank openings.
2. Filling the Jerry Can:
   • Place the jerry can on a stable, level surface.
   • Carefully pour the desired fuel into the jerry can. Do not fill to the very top; leave an air gap for expansion (approximately 5% of the total volume).
   • After filling, remove the spout and securely reattach the bayonet closure. Ensure the safety stirrup is down and the locking pin is engaged for a leak-proof seal.

Image: The pouring spout securely attached to the jerry can, ready for use.

Image: Detail of the bayonet closure, showing the safety stirrup and locking pin for a secure seal.

Operating Instructions

These jerry cans are designed for safe and efficient fuel transfer and storage.

1. Transporting Fuel:
   • Ensure the jerry can is completely sealed with the bayonet closure and safety pin.
   • Transport the jerry can in an upright position, secured to prevent tipping or rolling.
   • Avoid transporting fuel inside the passenger compartment of a vehicle. Use a trunk or an external carrier if possible.
2. Pouring Fuel:
   • Move the jerry can to a safe, well-ventilated area, away from ignition sources.
   • Place the jerry can on a stable surface near the vehicle or equipment to be refueled.
   • Remove the bayonet closure and attach the pouring spout as described in the "Setup" section.
   • Carefully insert the spout into the fuel tank opening.
   • Tilt the jerry can slowly to begin pouring. The design ensures optimal ventilation during pouring, preventing glugging and ensuring a smooth flow.
   • Once finished, remove the spout, reattach the bayonet closure securely, and clean any spills.

Image: A user demonstrating the proper technique for pouring fuel from the jerry can into a vehicle.

Image: The wide opening of the jerry can facilitates easy filling and pouring, with internal design for smooth flow.

Maintenance

Proper maintenance ensures the longevity and safe operation of your jerry cans.

• Cleaning:
  • Clean the exterior of the jerry can with a damp cloth. Avoid harsh chemicals that could damage the paint or seals.
  • The interior features an ammonia-resistant alkyd varnish to prevent rust. Do not attempt to clean the interior with abrasive materials or solvents that could compromise this protective layer.
• Inspection:
  • Regularly inspect the jerry can for dents, cracks, or signs of corrosion. Do not use a damaged jerry can.
  • Check the bayonet closure and its rubber seal for wear or damage. Replace if necessary to ensure a leak-proof seal.
  • Inspect the pouring spout for blockages or damage.
• Storage:
  • Store empty jerry cans in a cool, dry, well-ventilated area, away from direct sunlight and ignition sources.
  • Store jerry cans containing fuel according to the safety guidelines mentioned above.

Troubleshooting

Specifications

• Model: 109366
• Capacity: 20 Liters (each can)
• Material: Cold-rolled Alloy Steel
• Dimensions (L x W x H): 36 x 17 x 46 cm (each can)
• Weight: 3.7 Kilograms (each can)
• Color: Olive Green
• Fuel Compatibility: Gasoline, Diesel, Oil, and other liquid fuels.
• Approval: UN Approved for dangerous goods transport.
• Internal Coating: Ammonia-resistant alkyd varnish for rust prevention.
• Drop Height Certification: Over 100 cm.

Image: Detailed dimensions of the 20L jerry can and its pouring spout for reference.

Image: Key features including the pouring spout, UN approval marking, secure bayonet closure, and robust handle.

Warranty and Support

Monzana products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or visit the official Monzana website. If you encounter any issues or require technical assistance, please contact Monzana customer support through their official channels.

Note: Always provide your product model number (109366) and purchase details when contacting support.