1. Introduction
Thank you for choosing the KAWADA Nanoblock Wakin Goldfish Red Building Kit. This kit allows you to construct a detailed replica of the famous Japanese Wakin Goldfish using micro-sized building blocks. Nanoblocks provide a unique and challenging building experience, resulting in exquisite 3D models with remarkable realism.
This manual provides essential information for assembling, maintaining, and enjoying your Nanoblock model. Please read it thoroughly before beginning assembly.
2. Safety Information
- Small Parts Warning: This kit contains very small parts (bricks as small as 4mm x 5mm). It is not suitable for children under 3 years due to choking hazards.
- Recommended Age: This product is recommended for ages 8 and up. Adult supervision is advised for younger builders.
- Handling: Handle small pieces with care to avoid loss. Keep pieces away from pets.
- Storage: Store the kit and assembled model in a safe place, away from direct sunlight, high temperatures, and humidity.
3. Package Contents
Before starting assembly, please verify that all components are present:
- Nanoblock pieces (approximately 130 pieces for the Wakin Goldfish model)
- Instruction manual (this document)
If any parts are missing or damaged, please contact customer support.
4. Assembly Instructions
The Nanoblock Wakin Goldfish model is rated Level 3 difficulty. Follow the detailed step-by-step instructions provided in the included printed guide. The general assembly process involves:
- Preparation: Clear a well-lit, flat workspace. Open the packaging and carefully sort the Nanoblock pieces by color and size if desired, though the small number of pieces for this model may not require extensive sorting.
- Follow the Guide: Refer to the included pictorial instruction booklet. Each step illustrates which blocks to use and where to place them. Pay close attention to the orientation of the blocks.
- Layer by Layer: Nanoblock models are typically built layer by layer from the base upwards. Ensure each block is securely connected to the previous layer.
- Precision: Due to the micro size of the blocks, precision is key. Use tweezers if necessary for very small or hard-to-reach placements.
- Completion: Once all steps are followed, your Wakin Goldfish model will be complete.

Image 1: The fully assembled KAWADA Nanoblock Wakin Goldfish model, showcasing its red and white pattern and translucent fins.

Image 2: A close-up view of a single Nanoblock piece resting on a fingertip, illustrating the micro-sized nature of the building blocks.
5. Displaying Your Model
Once assembled, your Nanoblock Wakin Goldfish is ready for display. Choose a stable, flat surface where it will not be easily knocked over. The compact size of Nanoblock models makes them ideal for desks, shelves, or display cabinets.
- Placement: Avoid placing the model in direct sunlight for extended periods, as this may cause colors to fade over time.
- Stability: Ensure the display surface is level to prevent the model from toppling.
6. Maintenance
Nanoblock models require minimal maintenance to keep them looking their best:
- Cleaning: To remove dust, gently brush the model with a soft, dry brush (e.g., a clean makeup brush or a soft paintbrush). Avoid using water or chemical cleaners, as these may damage the plastic or cause discoloration.
- Handling: When moving the model, support it from the base to prevent pieces from detaching.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pieces do not fit together securely. | Incorrect orientation or misalignment. | Ensure the studs on the blocks align perfectly with the holes. Apply gentle, even pressure. Refer to the instruction booklet for correct orientation. |
| Model appears unstable or parts fall off. | Blocks not fully pressed together; incorrect assembly step. | Carefully re-examine the last few steps of assembly. Press all blocks firmly into place. If necessary, disassemble the affected section and reassemble. |
| Missing pieces. | Pieces may have been overlooked during sorting or lost. | Thoroughly check your workspace and packaging. If still missing, contact KAWADA customer support. |
8. Specifications
- Product Name: Nanoblock Wakin Goldfish Red Building Kit
- Brand: KAWADA
- Model Number: NBC223
- Number of Pieces: Approximately 130
- Difficulty Level: 3 (out of 5)
- Recommended Age: 8+ years
- Product Dimensions (assembled): Approximately 3 x 2 x 2 inches (7.6 x 5.1 x 5.1 cm)
- Item Weight: 1.06 ounces (30 grams)
- Material: ABS Plastic
- Manufacturer: SCBZ7 (KAWADA Ltd.)
- Release Date: July 23, 2017
9. Warranty and Support
For information regarding product warranty, missing parts, or customer support, please refer to the contact information provided on the product packaging or visit the official KAWADA Nanoblock website. Please retain your proof of purchase for any warranty claims.
Manufacturer: KAWADA Ltd.
Website: www.nanoblock.com (Please note: This is a general Nanoblock website, specific support details may vary by region.)