Breitling Bentley B06 S Men's Watch User Manual

1. Introduction

This manual provides comprehensive instructions for the Breitling Bentley B06 S Men's Watch, model AB061221/G810-980A. It covers initial setup, operational procedures for timekeeping and chronograph functions, maintenance guidelines, and troubleshooting tips. Please read this manual carefully to ensure proper use and longevity of your timepiece.

2. Watch Components Overview

Familiarize yourself with the key components of your Breitling Bentley B06 S watch:

Figure 1: Front view of the Breitling Bentley B06 S watch, showcasing the dial, subdials, bezel, crown, and pushers.

• Crown: Located at 3 o'clock, used for winding, setting time, and date.
• Pushers: Two buttons flanking the crown. Pusher A (at 2 o'clock) for starting/stopping the chronograph, Pusher B (at 4 o'clock) for resetting the chronograph.
• Main Dial: Displays hours, minutes, and seconds.
• Chronograph Subdials:
  • Small seconds subdial (at 9 o'clock).
  • 30-minute counter (at 3 o'clock).
  • 12-hour counter (at 6 o'clock).
• Date Window: Displays the current date (at 4:30 position).
• Bidirectional Rotating Bezel (Slide Rule): The outer ring of the bezel, used in conjunction with the inner scale on the dial for various calculations.

3. Initial Setup

3.1. Winding the Watch

Your Breitling Bentley B06 S is an automatic mechanical watch. It is wound by the motion of your wrist. If the watch has stopped or has not been worn for an extended period, it can be manually wound:

1. Ensure the crown is fully pushed in (position 1).
2. Rotate the crown clockwise approximately 30-40 times. This will provide sufficient power reserve to start the watch.

3.2. Setting the Time

1. Pull the crown out to position 3 (farthest out). The second hand will stop.
2. Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the desired time. When setting, advance the hands past 12 o'clock to determine if it is AM or PM (the date will change at midnight).
3. Once the time is set, push the crown back into position 1. The second hand will resume movement.

3.3. Setting the Date

Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this period, first adjust the time outside this window, then set the date, and finally reset the correct time.

1. Pull the crown out to position 2 (middle position).
2. Rotate the crown clockwise to advance the date until the correct date is displayed.
3. Push the crown back into position 1.

4. Operating the Watch

4.1. Time Display

The main hands indicate the current hour, minute, and second. The small subdial at 9 o'clock displays the continuous running seconds of the watch.

4.2. Chronograph Function

The chronograph allows for precise measurement of elapsed time.

• Start: Press Pusher A (at 2 o'clock) to start the central chronograph second hand and the minute/hour counters.
• Stop: Press Pusher A again to stop the chronograph. The elapsed time can be read from the central second hand, the 30-minute counter (at 3 o'clock), and the 12-hour counter (at 6 o'clock).
• Reset: After stopping the chronograph, press Pusher B (at 4 o'clock) to reset all chronograph hands to their zero positions. The chronograph must be stopped before it can be reset.

4.3. Slide Rule Bezel

The bidirectional rotating bezel features a circular slide rule, enabling various calculations such as multiplication, division, and unit conversions.

1. Multiplication: To multiply two numbers (e.g., A x B), align the number '10' on the inner scale (dial) with the first number (A) on the outer scale (bezel). Then, find the second number (B) on the inner scale, and the result will be indicated by the outer scale.
2. Division: To divide two numbers (e.g., A / B), align the first number (A) on the outer scale (bezel) with the second number (B) on the inner scale (dial). The result will be indicated on the outer scale, aligned with the '10' on the inner scale.
3. Unit Conversion: The slide rule can also be used for various unit conversions (e.g., miles to kilometers, gallons to liters) by aligning known conversion factors. Consult specialized guides for detailed conversion procedures.

5. Care and Maintenance

5.1. Cleaning

Regular cleaning helps maintain the appearance of your watch. Use a soft, damp cloth to wipe the case and bracelet. For metal bracelets, a soft brush with mild soapy water can be used, ensuring to rinse thoroughly and dry completely. Always ensure the crown is fully pushed in before cleaning with water.

5.2. Water Resistance

The Breitling Bentley B06 S watch has a water resistance rating of 100 meters (10 ATM). This makes it suitable for swimming and snorkeling, but not for scuba diving. Always ensure the crown and pushers are fully pushed in before any contact with water. Avoid operating the crown or pushers while the watch is wet or submerged.

5.3. Servicing

As a precision mechanical instrument, your watch requires periodic servicing to ensure optimal performance and longevity. It is recommended to have your Breitling watch serviced by an authorized service center every 3-5 years. This includes cleaning, lubrication, and adjustment of the movement, as well as replacement of seals to maintain water resistance.

5.4. Storage

When not wearing your watch, store it in a cool, dry place away from direct sunlight and strong magnetic fields. If storing for an extended period, consider a watch winder to keep the automatic movement running and lubricated.

6. Troubleshooting

Here are solutions to common issues you might encounter:

• Watch has stopped: Manually wind the watch by rotating the crown clockwise 30-40 times. Ensure the crown is fully pushed in. If the issue persists, the watch may require servicing.
• Date not changing at midnight: This indicates the watch's internal time is set incorrectly (e.g., AM/PM confusion). Reset the time, ensuring the date changes at 12 AM.
• Chronograph hands not resetting to zero: Ensure the chronograph is stopped before pressing Pusher B to reset. If hands are misaligned, consult an authorized service center for adjustment.
• Condensation under the crystal: This may indicate a loss of water resistance. Immediately take the watch to an authorized service center to prevent further damage.

7. Product Specifications

8. Warranty and Support

Your Breitling Bentley B06 S watch is covered by a manufacturer's warranty against defects in materials and workmanship. The duration and terms of the warranty are provided with your purchase documentation. For warranty claims, repairs, or technical support, please contact an authorized Breitling dealer or service center. Unauthorized repairs may void your warranty.

For further assistance, please refer to the official Breitling website or contact their customer service department.