Introduction
Thank you for choosing the Taylor 7595 Glass Digital Scale. This manual provides essential information for the proper setup, operation, and maintenance of your new scale. Please read these instructions thoroughly before use to ensure accurate readings and prolong the life of your device.
Setup
1. Unpacking
Carefully remove the scale from its packaging. Inspect the scale for any signs of damage. If damage is present, do not use the scale and contact customer support.
2. Battery Installation
Your Taylor 7595 scale requires 3 AAA batteries, which are included. To install:
- Locate the battery compartment on the underside of the scale.
- Open the battery compartment cover.
- Insert the 3 AAA batteries, ensuring correct polarity (+ and -).
- Close the battery compartment cover securely.
Image: Underside of the Taylor 7595 scale. The battery compartment is visible, along with a button for unit selection.
3. Initializing the Scale
Before first use or after moving the scale, it is important to initialize it for accurate readings:
- Place the scale on a hard, flat surface. Avoid carpets or uneven flooring.
- Step onto the scale briefly, then step off. The display will show "0.0" or a similar reading and then turn off. This indicates the scale has been calibrated.
4. Unit Selection (Pounds/Kilograms)
To switch between pounds (lb) and kilograms (kg):
- Locate the "UNIT" button on the underside of the scale, near the battery compartment.
- Press the button to toggle between "lb" and "kg". The selected unit will be displayed on the screen when the scale is active.
Operating Instructions
1. Taking a Weight Measurement
For accurate measurements, follow these steps:
- Ensure the scale is on a hard, flat surface.
- Step onto the scale with bare feet, standing still and centered.
- Your weight will be displayed on the LCD screen. The reading will flash when stable.
- Step off the scale. The display will hold the weight for a few seconds before turning off automatically.
Image: The Taylor 7595 digital scale showing a weight reading on its blue backlit display, placed on a light-colored tiled floor.
Image: A person's foot stepping onto the glass platform of the Taylor 7595 digital scale, initiating a weight measurement.
2. Weight Tracking Feature
The Taylor 7595 scale includes a weight tracking feature that allows you to compare your current weight to a previous measurement. This feature is designed for two users (P1 and P2).
- First Measurement (P1 or P2): Step onto the scale. The scale will display your current weight. This weight is automatically stored as your "Previous Weight" for the next measurement.
- Subsequent Measurements: When you step on the scale again, it will first display your current weight. Then, it will show your "Previous Weight" (P1 or P2) and the "Weight Difference" (UP or DOWN arrow with the numerical difference).
- Switching Users: The scale automatically detects the user based on weight similarity. If two users have very similar weights, you may need to step off and on again to ensure the correct user profile is selected.
Image: This graphic illustrates the key features of the Taylor 7595 scale, including its 12.2" x 12.2" tempered glass platform, 3.2" x 1.5" LCD readout, and the 2-person weight tracking display showing current weight, previous weight, and weight difference with an arrow indicator.
Care and Maintenance
- Cleaning: Clean the scale with a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals. Do not immerse the scale in water.
- Storage: Store the scale in a cool, dry place. Avoid extreme temperatures and direct sunlight.
- Battery Replacement: When the display shows "Lo", it's time to replace the batteries. Follow the battery installation steps.
- Accuracy: For best accuracy, always use the scale on a hard, flat surface. Avoid moving the scale frequently.
Troubleshooting
| Problem | Solution |
|---|---|
| "Lo" displayed | Low battery. Replace the 3 AAA batteries. |
| "Err" displayed | Overload indication. The weight capacity of the scale has been exceeded. Step off immediately to prevent damage. |
| Inaccurate or inconsistent readings |
|
| Scale does not turn on |
|
Specifications
- Model: 7595
- Capacity: 440 lb (200 kg)
- Graduation: 0.2 lb (0.1 kg)
- Display: Digital LCD with blue backlight
- Platform: Tempered Glass, 12.2" x 12.2"
- Power: 3 x AAA batteries (included)
- Special Features: Step-on technology, 2-person weight tracking, 4 high-precision sensors, anti-skid foot pads.
Image: The packaging for the Taylor Glass Digital Scale, model 7595, highlighting its 12.2" x 12.2" large platform and 440 lb capacity. It also mentions weight tracking and "UP/DOWN" indicators.
Image: An exploded view diagram of the Taylor 7595 scale, emphasizing its "Accuracy in the Details" with a sturdy platform, four sensors for best accuracy, and anti-skid foot pads for stability.
Warranty and Support
Taylor provides a limited warranty for this product against defects in material and workmanship. For specific warranty details and to register your product, please refer to the warranty card included in your product packaging or visit the official Taylor website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the Taylor website or contact their customer service department.
