TechniSat DIGITRADIO 1 Portable DAB+ FM Radio User Manual

1. Introduction

The TechniSat DIGITRADIO 1 is a portable DAB+ and FM radio designed for high-quality digital and analog radio reception. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device. Please read this manual carefully before using the product to ensure proper function and longevity.

Figure 1: TechniSat DIGITRADIO 1 Portable Radio

The DIGITRADIO 1 features a clear OLED display, intuitive controls, an integrated rechargeable battery for up to 10 hours of playback, and a powerful speaker with a passive bass membrane for excellent sound quality. It is developed and produced in Germany, adhering to high-quality standards.

2. Safety Information

• Do not expose the device to rain or moisture to prevent fire or electric shock.
• Do not expose the device to direct sunlight, heat sources, or extreme temperatures.
• Avoid placing the device near strong magnetic fields.
• Do not open the device casing. Refer all servicing to qualified personnel.
• Use only the specified power adapter and battery type.
• Keep out of reach of children.

3. Package Contents

Verify that all items are present in the package:

• TechniSat DIGITRADIO 1 Portable Radio
• Rechargeable Lithium-ion Battery
• USB Cable
• Power Adapter (Type C)
• User Manual (this document)

4. Product Overview

Familiarize yourself with the radio's components and controls.

Front Panel Controls

Figure 2: Control Panel Detail

• OLED Display: Shows station information, menu options, and time.
• Navigation Wheel (OK button): Used to navigate menus and confirm selections.
• DAB/FM Button: Switches between DAB+ and FM radio modes.
• MENU Button: Accesses the main menu for settings and options.
• FAV Button: Saves and recalls favorite radio stations.
• Star Button: Additional function button (may vary by firmware).

Rear Panel and Side Connections

Figure 3: Rear View with Battery Compartment

• Telescopic Antenna: For optimal radio reception.
• Battery Compartment: Houses the rechargeable Lithium-ion battery.
• USB Port (Type C): For charging the device.
• Headphone Jack (3.5mm): For private listening.

5. Setup

5.1 Battery Installation

1. Locate the battery compartment cover on the rear of the radio.
2. Gently slide or open the cover to reveal the battery slot.
3. Insert the provided Lithium-ion battery, ensuring correct polarity as indicated inside the compartment.
4. Close the battery compartment cover securely.

Figure 4: Battery Compartment

5.2 Charging the Battery

Before first use, fully charge the battery.

1. Connect the USB cable to the USB Type C port on the radio.
2. Connect the other end of the USB cable to the provided power adapter.
3. Plug the power adapter into a wall outlet.
4. The display will indicate charging status. Charging is complete when the indicator changes or turns off.

5.3 Initial Power On and Language Selection

1. Press and hold the power button (often integrated with the navigation wheel or a dedicated button) until the display lights up.
2. Upon first power-on, the radio may prompt you to select a language. Use the navigation wheel to scroll through options and press OK to confirm.
3. The radio will typically perform an automatic scan for DAB+ stations. Allow this process to complete.

6. Operating Instructions

6.1 Power On/Off

• To turn on: Press and hold the power button.
• To turn off: Press and hold the power button until the display turns off.

6.2 Adjusting Volume

Use the '+' and '-' buttons on the navigation wheel to increase or decrease the volume.

6.3 DAB+ Radio Operation

1. Press the DAB/FM button to select DAB+ mode.
2. If no stations are found or you wish to rescan, go to the MENU, select 'Scan' or 'Full Scan', and press OK.
3. Once scanning is complete, use the navigation wheel (left/right arrows) to browse available stations. Press OK to select a station.

Figure 5: OLED Display showing DAB+ station information

6.4 FM Radio Operation

1. Press the DAB/FM button to select FM mode.
2. To automatically scan for stations, press and hold the OK button. The radio will scan and stop at the next strong station.
3. For manual tuning, use the navigation wheel (left/right arrows) to adjust the frequency step by step.

6.5 Saving Favorite Stations

You can save up to 20 favorite stations for both DAB+ and FM modes.

1. Tune to the desired station.
2. Press and hold the FAV button.
3. Use the navigation wheel to select a preset number (1-20).
4. Press OK to save the station.
5. To recall a favorite station, briefly press the FAV button, then use the navigation wheel to select the desired preset and press OK.

6.6 Using Headphones

Connect standard 3.5mm headphones to the headphone jack on the side of the radio for private listening. The internal speaker will automatically mute when headphones are connected.

7. Maintenance

7.1 Cleaning

• Always disconnect the power adapter before cleaning.
• Use a soft, dry cloth to clean the exterior of the radio.
• Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.

7.2 Battery Care

• To maximize battery life, avoid fully discharging the battery frequently.
• If the radio will not be used for an extended period, charge the battery to approximately 50% and store it in a cool, dry place.
• Replace the battery if its performance significantly degrades. Use only genuine TechniSat replacement batteries.

8. Troubleshooting

9. Specifications

10. Warranty and Support

10.1 Manufacturer's Warranty

The TechniSat DIGITRADIO 1 comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

10.2 Customer Support

For technical assistance, warranty claims, or further information, please contact TechniSat customer support through their official website or the contact details provided with your product documentation.