1. Introduction
Thank you for purchasing the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce. This product is designed to provide efficient and adjustable lighting for various indoor environments. This manual provides essential information for safe installation, proper operation, and effective maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation or use, and retain them for future reference.
1.1 Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for indoor use only. Do not expose to water or moisture.
- Do not attempt to alter the fixture. Any modifications may void the warranty and create a safety hazard.
- Handle the fixture with care. Avoid dropping or subjecting it to strong impacts.
Figure 1: Front view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce in Gloss White finish.
2. Included Components
Carefully unpack your fixture and identify all parts. Ensure all components are present and undamaged before discarding packaging materials.
- 1 x LED Bullet Head Miter Arm Wall Sconce (18" Arm, Gloss White)
- 1 x Mounting Hardware Kit (includes mounting plate, screws, wire nuts)
- 1 x Instruction Manual
Figure 2: Angled view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, highlighting the miter arm and bullet head.
3. Installation Instructions
Important: Before starting installation, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. If you are unsure about electrical wiring, consult a qualified electrician.
- Prepare the Installation Area: Ensure the wall surface is clean, dry, and structurally sound to support the fixture.
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the wall switch or outlet where the fixture will be installed. Verify power is off using a voltage tester.
- Attach Mounting Plate: Secure the mounting plate (included in hardware kit) to the junction box in the wall using the provided screws. Ensure the plate is firmly attached.
- Make Electrical Connections:
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box and to the mounting plate using a ground screw.
Ensure all wire connections are secure and properly insulated with wire nuts.
- Mount the Fixture: Carefully tuck all wires into the junction box. Align the fixture's back plate with the mounting plate and secure it using the provided screws.
- Restore Power: Once the fixture is securely mounted, turn the power back on at the circuit breaker. Test the light fixture.
4. Operating Instructions
The Troy Lighting LBLEDWT3LBM018 LED Wall Sconce is designed for straightforward operation.
- Power On/Off: Operate the fixture using the standard wall switch connected to its circuit.
- Adjusting the Light: The bullet head of the sconce is adjustable, allowing you to direct the light beam as needed. Gently pivot the bullet head to achieve the desired lighting angle.
- Remote Control (if applicable): If your installation includes a compatible remote control system (as indicated by "Control Method: Remote" in specifications), refer to the remote control's specific instructions for pairing and operation.
5. Maintenance and Care
Proper care will ensure the longevity and appearance of your Troy Lighting fixture.
- Cleaning: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- LED Light Source: The LED light source in this fixture is non-removable and designed for long-term use. Do not attempt to replace the LED bulb.
- Inspection: Periodically check for any loose connections or signs of wear. If any issues are observed, disconnect power and consult a qualified electrician.
6. Troubleshooting
If you experience issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. |
|
|
| Light flickers or is dim. |
|
|
If these steps do not resolve the issue, please contact customer support or a qualified electrician.
7. Product Specifications
| Model Number | LBLEDWT3LBM018 |
| Brand | Troy Lighting |
| Finish | Gloss White |
| Material | Aluminum |
| Lamp Type | Integrated LED |
| Wattage | 14 Watts |
| Brightness | 980 Lumens |
| Color Temperature | 2700 Kelvin |
| Voltage | 120 Volts |
| Product Dimensions | 18 x 2.25 x 8.5 inches (Length x Width x Height) |
| Back Plate Dimensions | 5.13" Width x 5.13" Length |
| Item Weight | 6 Pounds |
| Mounting Type | Wall Mount |
| Control Method | Remote (if applicable) |
| Special Feature | Adjustable Light Head |
| UPC | 782042544529 |
8. Warranty Information
This Troy Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. For warranty claims, please retain your proof of purchase and contact customer support.
9. Customer Support
If you have any questions, require assistance with installation, or need to report a problem with your Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, please contact Troy Lighting customer service or your retailer. Please have your model number (LBLEDWT3LBM018) and proof of purchase ready when contacting support.
For more information about Troy Lighting products, you may visit the official Troy Lighting website or their store on Amazon: Troy Lighting Amazon Store.