Introduction
The Pipedream PDX Elite Mega-bator is an advanced, hands-free, USB-rechargeable device designed for personal pleasure. It features a unique combination of rotation and thrusting actions, offering 10 distinct patterns for a customizable experience. This manual provides essential information for the safe and effective use, maintenance, and care of your device.
Image: The Pipedream PDX Elite Mega-bator in its retail packaging, showcasing key features and interchangeable pleasure toppers.
Safety Information
- Read all instructions before use.
- This product is intended for adult use only.
- Do not submerge the main unit in water. The sleeve is waterproof, but the electronic components are not designed for full submersion.
- Use only water-based lubricants with the device. Oil-based lubricants can damage the Thermoplastic Elastomers (TPE) sleeve.
- Discontinue use immediately if you experience any discomfort or irritation.
- Keep out of reach of children.
Package Contents
- PDX Elite Mega-bator Main Unit
- 3 Interchangeable Pleasure Toppers (Pussy, Ass, Lips)
- USB Charging Cable
- Toy Cleaner
- Lotion
- 3 Silicone C-Rings
Image: The PDX Elite Mega-bator shown with its three interchangeable pleasure toppers and silicone c-rings.
Setup
Charging the Device
- Locate the USB charging port on the device.
- Connect the provided USB charging cable to the device and to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The device's indicator light will illuminate during charging and turn off or change color when fully charged.
- A full charge typically takes several hours.
Attaching a Pleasure Topper
- Select your desired pleasure topper (Pussy, Ass, or Lips).
- Align the topper with the opening of the main unit.
- Gently push and twist the topper until it is securely seated. Ensure a snug fit to prevent lubricant leakage.
Using the Suction Cup Base
The device features a suction cup base for hands-free operation. To attach, ensure the surface is clean, smooth, and non-porous. Press the suction cup firmly onto the surface and engage the lever (if present) to create a vacuum seal. To release, disengage the lever and gently lift the edge of the suction cup.
Image: Side view of the device, highlighting the adjustable suction cup base for stable, hands-free use.
Operating Instructions
Controls
The device features intuitive controls for power, speed, and pattern selection.
- Power Button: Press and hold to turn the device ON/OFF.
- '+' Button: Increases rotation/thrusting speed or intensity.
- '-' Button: Decreases rotation/thrusting speed or intensity.
- Mode Button (Arrow/Cycle Icon): Cycles through the 10 unique rotation and thrusting patterns.
Image: Front view of the device, detailing the control panel with power, intensity, and mode selection buttons.
Usage
- Ensure the device is fully charged.
- Apply a generous amount of water-based lubricant to the pleasure topper and yourself.
- Press and hold the power button to turn on the device.
- Use the '+' and '-' buttons to adjust the speed/intensity to your preference.
- Press the mode button to cycle through the 10 unique patterns of rotation and thrusting.
- When finished, press and hold the power button to turn off the device.
Maintenance and Care
Cleaning
Proper cleaning is essential for hygiene and longevity of your device.
- After each use, carefully remove the pleasure topper from the main unit.
- Wash the pleasure topper thoroughly with warm water and the provided toy cleaner or a mild antibacterial soap. Rinse completely.
- Wipe down the exterior of the main unit with a damp cloth and mild soap. Do not submerge the main unit.
- Allow all components to air dry completely before reassembling or storing.
Storage
Store the device in a clean, dry place away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device using the provided USB cable. |
| Motor stops or slows down during use. | Insufficient lubrication; excessive pressure; low battery. | Apply more water-based lubricant. Reduce pressure. Charge the device. |
| Device makes unusual noise. | Internal component issue; improper assembly of topper. | Ensure topper is securely attached. If noise persists, contact customer support. |
| Pleasure topper feels too tight. | Insufficient lubrication. | Ensure ample water-based lubricant is used. |
Specifications
- Model: RD517
- Brand: Pipedream
- Manufacturer: ITSATRONIC
- Dimensions (L x W x H): 15.8 x 5.9 x 4.7 inches (40.1 x 15 x 11.9 cm)
- Weight: 2.43 Pounds (1.1 kg)
- Materials: Thermoplastic Elastomers (TPE) sleeve, ABS plastic case
- Power Source: USB Rechargeable (Internal Battery)
- Features: 10 unique patterns, hands-free rotation and thrusting, light-up, stretchy, suction cup, waterproof sleeve, multispeed, multi-function, ribbed.
- Color: Black
Warranty and Support
For warranty information and customer support, please refer to the manufacturer's official website or contact their customer service department. Keep your proof of purchase for any warranty claims.
Manufacturer: ITSATRONIC
Brand: Pipedream
