Wildgame Innovations Silent Crush Cam 20 SC20i20-7 Game Camera User Manual

1. Introduction

Thank you for choosing the Wildgame Innovations Silent Crush Cam 20 SC20i20-7 Game Camera. This manual provides detailed instructions for setting up, operating, and maintaining your game camera to ensure optimal performance. The Silent Crush Cam 20 is designed to capture high-quality images and videos of wildlife with its silent lens technology and advanced features.

2. Package Contents

Please verify that all items are present before proceeding with setup.

• Wildgame Innovations Silent Crush Cam 20 (SC20i20-7)
• Mounting Strap
• User Manual
• Note: SD card and batteries are not included and must be purchased separately.

3. Key Features

The Silent Crush Cam 20 is equipped with advanced features for reliable wildlife monitoring:

• High Resolution Imaging: Captures 20 Megapixel still images and 720p video.
• Silent Lens System: Utilizes technology designed to operate without audible sound during capture.
• Dual On-Board Lens System: Features a dedicated daytime lens for optimal color and clarity, and a nighttime lens for improved low-light performance and reduced blur.
• Infrared Illumination: Equipped with 42 infrared LEDs for a 100-foot (30+ yard) illumination and detection range.
• Rapid Trigger Speed: Less than 0.5-second trigger speed to capture fast-moving subjects.
• Flextime Plus Time Lapse Technology: Allows for scheduled image capture over extended periods.
• Anti-Fog Lens Coating: Helps prevent dew and moisture buildup on camera lenses.
• Backlit Buttons: Facilitates easy programming and navigation in low-light conditions.
• Security Features: Designed with a security locking system and compatibility with a Python cable (optional).

4. Setup Guide

4.1. Battery Installation

1. Open the camera housing latch.
2. Locate the battery compartment.
3. Insert 8 AA batteries (not included), ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment securely.

4.2. SD Card Installation

1. With the camera powered off, locate the SD card slot.
2. Insert a compatible SD card (up to 32GB, not included) into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
3. To remove, gently push the card in until it clicks, then release, and it will eject.

4.3. Mounting the Camera

The camera can be mounted to a tree or wall using the provided strap or optional mounting hardware.

• Tree Mount: Thread the mounting strap through the slots on the back of the camera and secure it around a tree trunk. Position the camera at a height that provides a clear view of the desired area.
• Wall Mount: Use appropriate screws (not included) to secure the camera to a wall or post.

Figure 1: Front view of the Wildgame Innovations Silent Crush Cam 20. This image shows the camera's rugged, bark-textured casing, the dual lens system, and the infrared LEDs. The Wildgame Innovations logo is visible at the bottom.

5. Operating Instructions

5.1. Powering On/Off

To power on the camera, slide the power switch to the "ON" position. To power off, slide the switch to "OFF".

5.2. Setting Date and Time

Access the camera's menu using the backlit buttons. Navigate to the "Date/Time" setting and adjust using the up/down buttons. Confirm changes to ensure accurate timestamps on your captures.

5.3. Operating Modes

The camera typically offers several operating modes:

• Photo Mode: Captures still images when triggered by motion.
• Video Mode: Records video clips when triggered by motion.
• Time-Lapse Mode (Flextime Plus): Captures images at set intervals, regardless of motion. Configure intervals in the settings menu.

5.4. Adjusting Settings

Use the camera's menu and navigation buttons to customize settings such as:

• PIR Sensitivity: Adjust the motion sensor's sensitivity (Low, Medium, High) to prevent false triggers or missed events.
• Photo Burst: Set the number of photos taken per trigger event.
• Video Length: Define the duration of video recordings.
• Delay: Set the delay time between consecutive trigger events.
• Resolution: Select image (20MP) or video (720p) resolution.

Figure 2: Sample image captured by the Silent Crush Cam 20. This photo shows a deer in a wooded environment, demonstrating the camera's ability to capture clear wildlife images.

6. Maintenance

Proper maintenance ensures the longevity and performance of your game camera.

• Cleaning: Gently wipe the lens and infrared LEDs with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals. Clean the camera housing as needed.
• Battery Replacement: Replace batteries when the low battery indicator appears or when performance degrades. Always use fresh, high-quality AA batteries.
• SD Card Management: Regularly format your SD card (after backing up important files) to maintain optimal performance and prevent data corruption.
• Storage: When not in use, store the camera in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries during extended storage.

7. Troubleshooting

If you encounter issues with your Silent Crush Cam 20, refer to the following common problems and solutions:

If the problem persists, please contact Wildgame Innovations customer support for further assistance.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the official Wildgame Innovations website or contact their customer service department directly. Keep your purchase receipt as proof of purchase.

Wildgame Innovations Contact: Please visit www.wildgameinnovations.com for the most current support information.