Wildgame Innovations L20B20-7 Crush 20 X Lights-Out Trail Camera User Manual

Introduction

Thank you for choosing the Wildgame Innovations L20B20-7 Crush 20 X Lights-Out Trail Camera. This manual provides essential information for setting up, operating, and maintaining your trail camera to ensure optimal performance. Please read these instructions carefully before use.

The Crush 20 X Lights-Out Trail Camera is designed for capturing high-quality images and videos of wildlife with its 20 MP resolution and 42 invisible black infrared LEDs, offering a 100ft illumination and detection range. Its dual onboard camera system optimizes performance for both daytime and nighttime conditions.

Package Contents

Verify that all components are present:

• Wildgame Innovations L20B20-7 Crush 20 X Lights-Out Trail Camera
• Mounting Strap
• User Manual (this document)

Note: 8 AA batteries and an SD card (up to 32GB) are required and sold separately.

Camera Overview

Familiarize yourself with the key components of your trail camera.

Figure 1: Front View of the Trail Camera. This image displays the front of the Wildgame Innovations L20B20-7 Crush 20 X Lights-Out Trail Camera, featuring its bark-textured casing, the upper lens for the daytime camera, and the lower lens for the nighttime camera, along with the invisible black infrared LEDs.

Figure 2: Interior View with Controls. This image shows the camera opened, revealing the internal color display screen, navigation buttons (up, down, left, right, enter), power button, and SD card slot. The screen displays a sample image of a deer.

• Daytime Camera Lens: Located at the top, optimized for clear daytime images.
• Nighttime Camera Lens: Located at the bottom, designed for improved clarity and illumination in low light.
• Infrared LEDs: 42 invisible black infrared LEDs for discreet night illumination.
• Control Panel: Internal screen and backlit buttons for easy navigation and settings adjustment.
• Battery Compartment: Located inside, holds 8 AA batteries.
• SD Card Slot: For inserting a standard SD card (up to 32GB).
• Mounting Bracket: Integrated loops for securing the camera with a strap.

Setup

1. Battery Installation

1. Open the camera housing latch.
2. Locate the battery compartment.
3. Insert 8 new AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment securely.

Note: Use high-quality alkaline or lithium batteries for best performance and battery life. Do not mix old and new batteries or different battery types.

2. SD Card Installation

1. With the camera housing open, locate the SD card slot.
2. Insert a standard SD card (up to 32GB) into the slot with the metal contacts facing down, until it clicks into place.
3. To remove, push the SD card in until it clicks, then release, and it will eject.

Note: Format the SD card using the camera's menu system before first use and periodically thereafter to ensure optimal performance.

3. Mounting the Camera

Figure 3: Camera Mounted on a Tree. This image shows the Wildgame Innovations L20B20-7 Crush 20 X Lights-Out Trail Camera securely attached to a tree trunk using its included mounting strap, demonstrating a typical field setup.

1. Choose a sturdy tree or post at the desired height (typically 3-6 feet off the ground).
2. Thread the provided mounting strap through the slots on the back of the camera.
3. Wrap the strap around the tree/post and secure it tightly.
4. Adjust the camera angle to cover the desired area. Ensure there are no obstructions directly in front of the camera.

Operating Instructions

1. Powering On/Off

• To power on, open the camera housing and press the POWER button. The screen will illuminate.
• To power off, press and hold the POWER button until the screen turns off.

2. Menu Navigation

Use the backlit buttons to navigate the camera's menu:

• UP/DOWN Arrows: Scroll through menu options.
• LEFT/RIGHT Arrows: Change settings values or navigate between screens.
• ENTER Button: Confirm selection or enter a submenu.
• MENU Button: Access the main menu or go back to the previous screen.

3. Mode Selection

The camera typically offers Photo and Video modes. Select your desired mode from the main menu.

• Photo Mode: Captures still images.
• Video Mode: Records video clips (up to 15 seconds).

4. Settings Configuration

Access the settings menu to customize camera parameters:

• Resolution: Set image (20 MP) or video (720p/1080p) quality.
• Delay: Adjust the time interval between consecutive captures.
• Sensitivity: Configure the motion sensor's sensitivity (High, Medium, Low).
• Time/Date: Set the current time and date for accurate timestamps on captures.
• Format SD Card: Erase all data on the SD card.
• Adaptive Illumination: Enable or disable adaptive illumination technology for night captures.

5. Viewing Images/Videos

The built-in color display allows for immediate review of captured media:

1. From the main screen, navigate to the "Gallery" or "Playback" option.
2. Use the arrow buttons to scroll through images and videos.
3. Press ENTER to view a selected item.
4. Options like "Delete" or "Zoom" may be available depending on the firmware.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lenses and housing. Avoid abrasive cleaners or solvents. Ensure the anti-fog lens coating remains intact.
• Battery Replacement: Replace all 8 AA batteries when the low battery indicator appears or when performance degrades. Always replace with a fresh set of the same type.
• SD Card Management: Periodically format your SD card using the camera's menu to prevent data corruption and ensure optimal recording. Back up important files to a computer before formatting.
• Storage: When not in use for extended periods, remove batteries and the SD card, and store the camera in a cool, dry place.

Troubleshooting

Specifications

Warranty and Support

This Wildgame Innovations L20B20-7 Crush 20 X Lights-Out Trail Camera comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or service inquiries, please contact Wildgame Innovations customer service. Keep your proof of purchase for warranty validation.

Contact information for support is typically found on the manufacturer's website or product packaging.