Introduction
This manual provides instructions for the safe and efficient use of your PK Power AC/DC Adapter. This adapter is designed to provide power to and charge compatible devices, specifically the Cen-Tech 3-in-1 Portable Power Pack Jump Starter models 62306 and 62376. Please read this manual thoroughly before use to ensure proper operation and longevity of your product.
Product Overview
The PK Power AC/DC Adapter is a reliable power supply unit designed for specific portable power packs. It converts standard AC wall power to the DC power required by your device, ensuring efficient charging and operation.

Image 1: Front view of the PK Power AC/DC Adapter, showing the main unit with a US-style two-prong plug and the attached DC output cable with a barrel connector.

Image 2: Side view of the PK Power AC/DC Adapter, highlighting the compact design and the barrel connector at the end of the output cable.
Setup Instructions
- Inspect the Adapter: Before first use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Verify Compatibility: Ensure your device (Cen-Tech 3-in-1 Portable Power Pack Jump Starter models 62306 or 62376) requires a power input compatible with this adapter's specifications (Input: 100-240V, Output: specific DC voltage/current, barrel connector).
- Connect to Device: Insert the barrel connector of the adapter's output cable firmly into the DC input port of your Cen-Tech Portable Power Pack.
- Connect to Power Outlet: Plug the adapter's AC prongs into a standard 100-240V AC wall outlet.
- Power Indicator: Some power packs may have an indicator light to show charging status. Refer to your power pack's manual for details.
Important: Use only with compatible devices. Incorrect voltage or connector type can damage your device.
Operating Instructions
Once connected as described in the Setup section, the adapter will begin supplying power to your Cen-Tech Portable Power Pack.
Charging Your Device
- Ensure the adapter is securely connected to both the power pack and a live wall outlet.
- Allow sufficient time for your power pack to charge. Charging times vary depending on the power pack's battery capacity and current charge level.
- Disconnect the adapter from the wall outlet and then from the power pack once charging is complete or when the power pack's indicator shows a full charge.
Safety Precautions
- Do not expose the adapter to water, rain, or excessive moisture.
- Do not disassemble or modify the adapter.
- Avoid extreme temperatures.
- Keep out of reach of children.
- Unplug the adapter from the wall outlet when not in use for extended periods.
- Ensure proper ventilation around the adapter during operation.
Care and Maintenance
- Cleaning: Disconnect the adapter from all power sources before cleaning. Wipe the adapter with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adapter to prevent damage.
- Cable Inspection: Periodically check the power cable and connector for any signs of wear, cuts, or damage. Replace the adapter if any damage is found.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Adapter not supplying power. | No power from outlet. | Test the outlet with another device. Check circuit breaker. |
| Adapter not supplying power. | Loose connection. | Ensure the adapter is firmly plugged into both the wall outlet and the device. |
| Adapter not supplying power. | Damaged adapter or cable. | Inspect for visible damage. Discontinue use if damaged and replace. |
| Device not charging. | Incompatible device. | Verify the adapter's specifications match your device's requirements. |
| Adapter feels hot. | Normal operation or poor ventilation. | A slight warmth is normal. Ensure the adapter is in a well-ventilated area and not covered. If excessively hot, unplug immediately. |
If troubleshooting steps do not resolve the issue, contact customer support.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | PKPOWER |
| Input Voltage | 100-240V (Worldwide Compliant) |
| Connector Type | Barrel Connector |
| Compatible Devices | Cen-Tech 3-in-1 Portable Power Pack Jump Starter (Item# 62306, 62376) |
| Safety Certifications | CE / FCC / RoHS |
| Protection Features | OVP, OCP, SCP (Over Voltage, Over Current, Short Circuit Protection) |
| Color | Black |
| UPC | 794959547982 |
| ASIN | B06XJH3LPS |
Warranty Information
This PK Power AC/DC Adapter comes with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or external causes.
For warranty claims, please retain your proof of purchase and contact customer support.
Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact PK-Power customer service.
Our friendly and reliable customer service will respond to you within 24 hours.
Online Support: Visit the PKPOWER Store on Amazon for more information and contact options.