Introduction
Thank you for choosing the Westinghouse Cayuga 60-inch Ceiling Fan with LED Light Kit. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Important Safety Information
To reduce the risk of electric shock, fire, or personal injury, always follow these basic safety precautions:
- Read all instructions before installing the fan.
- Ensure the installation site is suitable for a ceiling fan and can support the fan's weight (approximately 23.4 lbs).
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
- Disconnect power at the main circuit breaker before installation or servicing.
- Do not operate the fan with damaged blades or housing.
- Keep hands, clothing, and other objects clear of the fan blades when the fan is in operation.
Package Contents
Verify that all components are present before beginning installation:
- Ceiling Fan Motor Assembly
- Six Reversible Fan Blades (Rosewood/Light Maple finish)
- LED Light Kit with Opal Frosted Glass
- Two 8-watt (60-watt equivalent) Dimmable T7 LED Bulbs (E26 base)
- Remote Control with Wall Mount
- Down Rod
- Mounting Hardware and Wiring Connectors
Setup and Installation
Professional installation is recommended for optimal safety and performance. Ensure power is disconnected at the circuit breaker before proceeding.
1. Mounting the Fan
- Secure the mounting bracket to the ceiling outlet box. The outlet box must be securely fastened to the building structure.
- Attach the down rod to the fan motor assembly.
- Carefully lift the fan assembly and hang it from the mounting bracket.
2. Electrical Wiring
- Connect the fan's electrical wires to the household wiring according to the provided wiring diagram. Ensure all connections are secure.
- Install the remote control receiver into the fan's canopy, ensuring the antenna is positioned for optimal signal reception.
3. Attaching Blades and Light Kit
- Attach the fan blades to the motor housing using the provided screws. The blades are reversible, offering a choice between rosewood and light maple finishes.
- Install the LED light kit to the bottom of the fan motor assembly.
- Insert the two 8-watt T7 LED bulbs into the light kit sockets.
- Secure the opal frosted glass shade to the light kit.
Operating Instructions
Remote Control Functions
Your Westinghouse Cayuga ceiling fan is operated using the included remote control. Ensure the remote has working batteries.
- OFF: Turns the fan off.
- HIGH: Sets the fan speed to high.
- MED: Sets the fan speed to medium.
- M.LOW: Sets the fan speed to medium-low.
- LOW: Sets the fan speed to low.
- LIGHT: Toggles the light on/off. Press and hold to dim the light.
Seasonal Operation (Reverse Function)
Most ceiling fans include a reverse switch (often located on the motor housing) to change the direction of blade rotation. This allows for seasonal optimization:
- Summer Mode (Counter-clockwise): Creates a downward breeze, providing a cooling effect.
- Winter Mode (Clockwise): Draws warm air up towards the ceiling and circulates it down the walls, helping to redistribute heat.
Consult the specific diagram in your fan's physical manual for the exact location of the reverse switch.
Care and Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Use a soft, damp cloth to clean the fan blades and motor housing. Do not use abrasive cleaners or solvents.
- Bulb Replacement: The LED light kit uses two 8-watt T7 LED bulbs with an E26 base. Ensure power is off before replacing bulbs.
- Tighten Fasteners: Periodically check and tighten all screws and fasteners on the fan blades and mounting hardware.
Troubleshooting Guide
If you experience issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control not paired or faulty. | Check circuit breaker; Verify all wire connections are secure; Re-pair remote control or replace batteries. |
| Fan wobbles | Loose blade screws; Unbalanced blades; Loose mounting hardware. | Tighten all blade screws; Use a balancing kit (not included) to balance blades; Ensure mounting hardware is secure. |
| Light does not work | Bulbs loose or burnt out; Wiring issue in light kit. | Check and tighten bulbs; Replace bulbs if necessary; Inspect light kit wiring. |
| Remote control not working | Dead batteries; Remote not paired; Obstruction between remote and receiver. | Replace remote batteries; Re-pair remote with receiver; Ensure clear line of sight. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Westinghouse |
| Model Number | 7207700 |
| Model Name | Cayuga |
| Color | Brushed Nickel |
| Style | Remote Control |
| Blade Size | 60 inches |
| Blade Finish | Reversible (Rosewood/Light Maple) |
| Light Source | LED |
| Bulb Type | 2 x 8-watt (60-watt equivalent) Dimmable T7 LED |
| Bulb Base | E26 |
| Brightness | 1600 lumen |
| Control Method | Remote Control |
| Mount Type | Down Rod Only |
| Voltage | 120 Volts |
| Item Weight | 23.4 Pounds |
| Required Assembly | Yes |
| Certification | ETL |
Warranty and Customer Support
Westinghouse provides a limited lifetime motor warranty and a two-year warranty on all other parts for this ceiling fan. For detailed warranty information or technical assistance, please refer to the warranty card included with your product or visit the official Westinghouse website.
For customer support, please contact Westinghouse directly through their official channels.
