Farberware FW29919 Freestanding Hot and Cool Water Cooler Dispenser Instruction Manual

1. Introduction

The Farberware FW29919 Freestanding Hot and Cool Water Cooler Dispenser is designed to provide convenient access to both hot and cold water. This manual contains important information regarding the safe operation, installation, maintenance, and troubleshooting of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.

Figure 1: Farberware FW29919 Water Cooler Dispenser with 5-gallon water bottle on top. This image shows the Farberware FW29919 Freestanding Hot and Cool Water Cooler Dispenser in black, with a 5-gallon water bottle placed on its top-loading reservoir. The dispenser features red and blue spigots for hot and cold water, respectively, and a drip tray below.

2. Safety Information

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using this appliance:

• Read all instructions before using the appliance.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Do not immerse the power cord, plug, or any part of the appliance in water or other liquids.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
• Do not use outdoors.
• Use only with 3 or 5-gallon water bottles.
• Ensure the appliance is placed on a stable, level surface.
• Keep the back of the unit at least 4 inches away from a wall to allow for proper ventilation.
• The hot water dispenser is equipped with a child safety lock. Always ensure children are supervised when using the dispenser.

3. Product Overview

The Farberware FW29919 water cooler features a top-loading design for water bottles and dispenses both hot and cool water. It includes a bottom storage cabinet for convenience.

Figure 2: Farberware FW29919 Water Cooler Dispenser with key dimensions labeled. This image highlights the approximate dimensions of the water cooler: 31 inches in height, 11 inches in width, and 11 inches in depth (without the bottle). It also shows the bottom storage cabinet.

Components:

• Top-loading water reservoir
• Hot water spigot (red) with child safety lock
• Cool water spigot (blue)
• Drip tray and grille
• Indicator lights (Power, Heating, Cooling)
• Bottom storage cabinet
• Power switches for heating and cooling (located at the back)

Figure 3: Close-up view of the Farberware FW29919 water dispenser's control panel and spigots. A detailed view of the dispenser's front panel, showing the Farberware logo, indicator lights for power, heating, and cooling, and the red (hot) and blue (cold) water spigots with child safety locks.

4. Setup

1. Unpacking: Carefully remove the water dispenser from its packaging. Retain all packaging materials for future transport or storage.
2. Placement: Place the dispenser on a firm, level surface. Ensure there is adequate space (at least 4 inches) behind the unit for proper ventilation. Avoid placing in direct sunlight or near heat sources.
3. Water Bottle Installation:
   • Clean the exterior of a 3 or 5-gallon water bottle.
   • Remove the protective seal from the water bottle cap.
   • Invert the water bottle and carefully place it onto the top-loading reservoir of the dispenser. Ensure it is seated securely.
4. Initial Flush: Before initial use, dispense and discard at least 1 liter of water from both the hot and cool spigots to flush the system.
5. Power Connection: Plug the power cord into a grounded electrical outlet.

5. Operating Instructions

Your Farberware water dispenser offers both hot and cool water options.

Activating Heating and Cooling:

The heating and cooling functions are controlled by separate switches located on the back of the unit.

Figure 4: Close-up of the power switches for heating and cooling on the back of the Farberware FW29919 water dispenser. This image provides a close-up of the two toggle switches on the back of the unit: a green switch for the cold water function and a red switch for the hot water function. These must be turned on for the respective temperatures to activate.

• Hot Water: Locate the red switch on the back of the unit and flip it to the 'ON' position to activate the heating element. The red indicator light on the front panel will illuminate when heating.
• Cool Water: Locate the green switch on the back of the unit and flip it to the 'ON' position to activate the cooling element. The green indicator light on the front panel will illuminate when cooling.

Dispensing Water:

• Cool Water: Place your cup under the blue spigot. Push the blue lever down to dispense cool water. Release the lever to stop.
• Hot Water: The red spigot for hot water has a child safety lock. To dispense hot water, first slide the red safety lock to the side, then push the red lever down. Release the lever to stop.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your water dispenser.

• Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Drip Tray Cleaning: The drip tray and grille are removable for easy cleaning. Empty and clean the drip tray regularly to prevent overflow and bacterial growth. Wash with mild soap and water, then rinse thoroughly.
• Descaling (Recommended Annually): To prevent mineral buildup, descaling is recommended. Unplug the unit, remove the water bottle, and drain all water. Fill the hot water tank with a descaling solution (e.g., citric acid solution or white vinegar diluted with water). Let it sit for 30 minutes, then drain and flush with clean water several times.
• Air Filter Cleaning: Periodically check and clean the air filter located on the back of the unit to ensure proper airflow and cooling efficiency.

7. Troubleshooting

If you experience issues with your water dispenser, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your product at the time of purchase or contact Farberware customer service. Keep your purchase receipt as proof of purchase for warranty claims.