Introduction
This manual provides instructions for the setup, operation, and maintenance of your Atlanta Children's Alarm Clock, Model 1981/17. This quartz analog clock features a silent second hand, light function, and snooze feature. It is designed with a durable rubberized casing and a charming unicorn rainbow design on the dial, making it ideal for a child's room.
Please read this manual thoroughly before using the alarm clock to ensure proper function and longevity.
Safety Information
- Keep the alarm clock away from water and excessive moisture.
- Do not expose the clock to extreme temperatures or direct sunlight.
- Use only the specified battery type (1 x AA battery).
- Ensure batteries are inserted with correct polarity (+/-).
- Remove batteries if the clock will not be used for an extended period to prevent leakage.
- Keep batteries out of reach of small children.
- Do not attempt to disassemble or repair the clock yourself. Contact qualified personnel for service.
Package Contents
- Atlanta Children's Alarm Clock (Model 1981/17)
- Note: 1x AA battery is required and not included.
Product Overview
Familiarize yourself with the components and controls of your alarm clock.
Figure 1: Front View. This image shows the front of the alarm clock, featuring the analog dial with a unicorn and rainbow design, hour, minute, and second hands, and numerical markings for time and minutes.
Figure 2: Back View. This image displays the back of the alarm clock, highlighting the time setting knob, alarm setting knob, and the battery compartment cover.
Figure 3: Side View with Setting Knobs. This image shows the side of the alarm clock, specifically highlighting the two black knobs used for setting the time and alarm.
Figure 4: Side View with Alarm Switch. This image displays the other side of the alarm clock, featuring the silver ON/OFF switch for the alarm function.
Figure 5: Front View with Light Activated. This image illustrates the alarm clock's face with the integrated light function turned on, illuminating the dial for visibility in low light conditions.
Key Components:
- Time Setting Knob: Located on the back, used to adjust the current time.
- Alarm Setting Knob: Located on the back, used to set the desired alarm time.
- Alarm ON/OFF Switch: Located on the side, activates or deactivates the alarm.
- Light/Snooze Button: Located on the top, activates the dial light and snooze function.
- Battery Compartment: Located on the back, holds one AA battery.
Setup
1. Battery Installation
- Open the battery compartment cover located on the back of the alarm clock (refer to Figure 2).
- Insert one (1) AA battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
2. Setting the Current Time
- Locate the Time Setting Knob on the back of the clock (refer to Figure 2).
- Rotate this knob in either direction until the hour and minute hands display the correct current time.
Operating Instructions
1. Setting the Alarm Time
- Locate the Alarm Setting Knob on the back of the clock (refer to Figure 2).
- Rotate this knob until the alarm hand points to your desired wake-up time.
2. Activating/Deactivating the Alarm
- To activate the alarm, slide the Alarm ON/OFF Switch (located on the side, refer to Figure 4) to the "ON" position.
- To deactivate the alarm, slide the Alarm ON/OFF Switch to the "OFF" position.
3. Using the Light Function
- Press the Light/Snooze Button located on the top of the clock. The dial will illuminate for a few seconds (refer to Figure 5).
- Release the button to turn off the light.
4. Using the Snooze Function
- When the alarm sounds, press the Light/Snooze Button on the top of the clock.
- The alarm will temporarily stop and sound again after approximately 5-10 minutes (snooze duration may vary slightly).
- To turn off the alarm completely, slide the Alarm ON/OFF Switch to the "OFF" position.
5. Silent Second Hand
This alarm clock is equipped with a silent sweep second hand, ensuring a quiet environment without the traditional ticking sound.
Maintenance
Cleaning
- Wipe the clock's surface with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish.
Battery Replacement
- When the clock's display dims, the alarm weakens, or the clock stops functioning, it is time to replace the battery.
- Follow the "Battery Installation" steps in the Setup section to replace the AA battery.
- Dispose of used batteries responsibly according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock not working / Hands not moving | Battery is dead or incorrectly inserted. | Replace the AA battery, ensuring correct polarity. |
| Alarm does not sound | Alarm is not activated (ON/OFF switch is OFF) or alarm time is not set correctly. | Slide the Alarm ON/OFF switch to "ON". Verify the alarm time is set correctly. Replace battery if weak. |
| Light function not working | Battery is weak or dead. | Replace the AA battery. |
| Alarm sounds at the wrong time | Alarm time is set incorrectly. | Re-adjust the alarm time using the Alarm Setting Knob. |
Specifications
- Model: 1981/17
- Brand: Atlanta
- Movement Type: Quartz
- Display Type: Analog
- Special Features: Alarm, Silent Second Hand, Snooze, Light
- Power Source: 1 x AA Battery (not included)
- Material: Plastic (rubberized casing)
- Color: Pink / Multicolor (Unicorn Rainbow design)
- Dimensions (L x W x H): 9.5 x 6 x 10 cm (approximately 3.74 x 2.36 x 3.94 inches)
- Weight: 110 grams (approximately 0.24 lbs)
- Room Type: Children's Bedroom
Warranty and Support
Atlanta products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please refer to the retailer where the product was purchased or visit the official Atlanta website for contact information.
Please retain your proof of purchase for warranty purposes.
