LOBKIN LB-1062

Download PDF
Contents

LOBKIN LB-1062 Wired Kids Headphones with LED Cat Ears User Manual

Model: LB-1062

1. Introduction

Thank you for choosing the LOBKIN LB-1062 Wired Kids Headphones. These headphones are designed with comfort and safety in mind, featuring an 85dB volume limit to protect young ears, soft earpads, and an adjustable headband. The unique LED cat ears add a fun visual element. This manual provides essential information for the proper setup, operation, and maintenance of your headphones.

LOBKIN LB-1062 Wired Kids Headphones with LED Cat Ears, pink color.

Figure 1: LOBKIN LB-1062 Wired Kids Headphones (Pink)

2. Setup and First Use

2.1 Connecting the Headphones

  1. Locate the 3.5mm audio jack on the headphone cable.
  2. Insert the 3.5mm audio jack firmly into the audio output port of your device (e.g., smartphone, tablet, computer, MP3 player).
  3. Ensure the connection is secure for optimal audio transmission.
Icons representing wide compatibility of LOBKIN LB-1062 headphones with various devices like computers, tablets, smartphones, and MP3 players.

Figure 2: Wide Compatibility with 3.5mm Jack Devices

2.2 Adjusting the Headband

The headband is adjustable to fit various head sizes. Gently slide the earcups up or down along the headband until a comfortable and secure fit is achieved. The soft earpads and padded headband ensure comfort during extended use.

Close-up of the adjustable headband mechanism on the LOBKIN LB-1062 headphones.

Figure 3: Adjustable Headband for Comfortable Fit

Close-up of the soft, comfortable earpads of the LOBKIN LB-1062 headphones.

Figure 4: Soft Earpads for Enhanced Comfort

2.3 Activating LED Cat Ears

The LED lights on the cat ears are powered by a built-in 3V button battery. To operate the lights:

  • Locate the ON/OFF switch behind the left cat ear.
  • Single Click: Activates the steady light mode.
  • Double Click: Activates the blinking light mode.
  • Third Click: Turns the LED lights off.
Hand demonstrating how to activate the LED lights on the LOBKIN LB-1062 cat ear headphones by pressing a button.

Figure 5: LED Light Activation Button

LOBKIN LB-1062 headphones with glowing cat ears, illustrating steady and blinking light modes.

Figure 6: LED Light Modes (Steady and Blinking)

3. Operating the Headphones

3.1 Volume Limiting Feature

The LOBKIN LB-1062 headphones incorporate built-in volume-limiting circuitry. This feature automatically restricts the maximum sound output to 85dB, a level recommended as safe for children's hearing. This ensures a safe listening experience without the risk of excessive volume.

LOBKIN LB-1062 headphones with an overlay indicating 85dB safe hearing protection.

Figure 7: 85dB Safe Hearing Protection

3.2 Folding for Portability

For convenient storage and transport, the headphones feature a foldable design. Gently fold the earcups inwards towards the headband. This compact form factor makes them ideal for travel or storing in small spaces.

LOBKIN LB-1062 headphones shown in their folded, portable configuration.

Figure 8: Foldable Design for Portability

4. Maintenance and Care

  • Cleaning: Use a soft, dry cloth to clean the headphones. Avoid using harsh chemicals or abrasive materials.
  • Storage: When not in use, store the headphones in a clean, dry place, preferably in their folded position to prevent damage.
  • Cable Care: Avoid sharp bends or excessive pulling on the audio cable to prevent internal wire damage.
  • Battery Replacement (LEDs): The LED lights are powered by a 3V button battery. If the lights dim or stop working, the battery may need replacement. Carefully open the battery compartment behind the left cat ear and replace with a new CR2032 3V button battery. Ensure correct polarity.
  • Water Exposure: These headphones are not water-resistant. Avoid exposure to liquids to prevent damage.

5. Troubleshooting

ProblemPossible CauseSolution
No sound
  • Audio jack not fully inserted.
  • Device volume too low or muted.
  • Incorrect audio output selected on device.
  • Damaged cable or jack.
  • Ensure 3.5mm jack is fully inserted into the device.
  • Increase device volume and check for mute settings.
  • Verify the correct audio output is selected in your device's settings.
  • Test with another device or cable if possible.
LED lights not working
  • LED switch is off.
  • Battery is depleted.
  • Battery inserted incorrectly.
  • Press the ON/OFF switch behind the left cat ear to cycle through modes.
  • Replace the 3V button battery (CR2032).
  • Ensure the new battery is inserted with correct polarity.
Sound distortion or crackling
  • Loose audio connection.
  • Interference from other devices.
  • Damaged audio cable.
  • Re-insert the 3.5mm jack firmly.
  • Move away from potential sources of electromagnetic interference.
  • Test with another device or cable.

6. Specifications

FeatureDetail
Model NameLB-1062
BrandLOBKIN
Connectivity TechnologyWired (3.5mm Jack)
Ear PlacementOver Ear
Form FactorOn Ear
Volume Limit85 dB (Max)
Special FeaturesAdjustable Headband, Foldable, LED Cat Ears, Soft Earpads
Cable Length5 feet (approx. 1.5 meters)
MaterialAcrylonitrile Butadiene Styrene (ABS)
Item Weight6.4 ounces (approx. 181 grams)
Product Dimensions7.09 x 1.57 x 5.51 inches
LED Battery TypeCR2032 3V Button Battery
UPC714838294066

7. Product Demonstration Video

Watch this official video for a visual guide on the features and operation of the LOBKIN LB-1062 Wired Kids Headphones.

Video 1: Official product video demonstrating the features and operation of the LOBKIN LB-1062 Wired Kids Headphones, including folding, LED light activation, and usage by children.

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact LOBKIN customer service directly. Contact details can typically be found on the official LOBKIN website or through your purchase platform.

© 2024 LOBKIN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.