KEF GFS-524 Speaker Stand Instruction Manual

Introduction

The KEF GFS-524 Speaker Stands are designed to provide stable and acoustically optimized support for your bookshelf speakers, including the KEF LS50. These stands are constructed to match the aesthetic of KEF speakers and can be enhanced with inert filler for improved damping.

Safety Information

• Ensure all components are securely fastened during assembly to prevent instability.
• Do not exceed the recommended weight capacity for the stands.
• Place stands on a level, stable surface to prevent tipping.
• Keep small parts away from children.

Package Contents

Your KEF GFS-524 Speaker Stand package includes the following:

• 2 x Speaker Stands (unassembled components)
• Assembly hardware (screws, washers, etc.)
• Adjustable Spike Feet

Setup and Assembly

Follow these steps to assemble your KEF GFS-524 Speaker Stands:

1. Unpack Components: Carefully remove all parts from the packaging and verify against the package contents list.
2. Assemble Base: Attach the vertical columns to the base plate using the provided screws. Ensure all connections are tight and secure.
3. Attach Top Plate: Secure the top plate to the vertical columns.
4. Install Spike Feet: Screw the adjustable spike feet into the bottom of the base plate. These can be adjusted to level the stand on uneven surfaces. For hardwood floors, consider purchasing separate protection disks.
5. Optional Inert Filler: The central column of the stand can be filled with non-resonant and non-magnetic inert filler (sold separately) for enhanced damping and stability. If filling, do so before attaching the top plate or ensure the filler port is accessible.

Image 1: Exploded view of KEF GFS-524 Speaker Stand components, showing the base, columns, and top plate.

Image 2: Fully assembled KEF GFS-524 Speaker Stand in Titanium finish, viewed from the front.

Operating Instructions

Once assembled, position your speaker stands in the desired location. Ensure the stands are level using the adjustable spike feet.

• Speaker Placement: Carefully place your bookshelf speakers onto the top plate of the stands. For KEF LS50 speakers, you may need to remove their original rubber feet and place them on the stand's top corners to ensure a secure fit.
• Stability Check: Gently test the stability of the speaker and stand assembly before leaving it unattended.
• Optimal Listening: Adjust the position of the stands and speakers to achieve the best soundstage and imaging in your listening environment.

Image 3: KEF GFS-524 Speaker Stand supporting a KEF LS50 speaker, demonstrating proper speaker placement.

Maintenance

• Cleaning: Wipe the stands with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight and secure.
• Spike Adjustment: Re-adjust spike feet if the stand becomes uneven over time.

Troubleshooting

Issue: Missing or incorrect hardware.

Solution: Contact KEF customer support immediately for replacement parts. Do not attempt to use alternative hardware that may compromise stability.

Issue: Stand is unstable or wobbly.

Solution: Ensure all assembly screws are tightened. Adjust the spike feet on the base to level the stand on your floor surface. Verify the speaker is centered and stable on the top plate.

Issue: Speaker does not sit flush on the top plate.

Solution: For some speakers, such as the KEF LS50, it may be necessary to remove the speaker's original rubber feet and place them on the corners of the stand's top plate to ensure a stable and flush fit.

Specifications

Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please contact KEF customer service. Refer to the official KEF website or your purchase documentation for specific contact details and warranty terms applicable to your region.

Online Support: www.kef.com/support