1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your JVC KW-M75BT Bluetooth Car Stereo Receiver. Please read this manual thoroughly before using the product and retain it for future reference. This unit features a 6.8-inch touchscreen display, Bluetooth connectivity, Apple CarPlay, Android Auto, and various multimedia playback options.
2. Safety Information
Observe the following safety precautions to prevent accidents, injury, or damage to the unit.
- Do not operate the unit while driving. Always pull over to a safe location before making adjustments or using features that require visual attention.
- Ensure proper installation by a qualified professional to prevent electrical shorts or damage to your vehicle's electrical system.
- Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Use only specified power supply and wiring. Incorrect connections can cause fire or damage.
- Keep the volume at a level that allows you to hear outside traffic sounds.
3. Package Contents
Verify that all items are present in the package:
- JVC KW-M75BT Receiver Unit
- Wiring Harness
- Remote Control
- Microphone
- GPS Antenna (if applicable)
- Mounting Hardware
- User Manual (this document)
4. Installation
Professional installation is highly recommended for this product. Incorrect installation can lead to vehicle damage or unit malfunction. Refer to the detailed wiring diagrams provided with the unit for specific connections.
4.1 Wiring Connections
- Power Connection: Connect the yellow wire to the constant 12V supply, the red wire to the accessory 12V supply, and the black wire to ground.
- Speaker Connections: Connect speaker wires to the corresponding vehicle speakers, ensuring correct polarity.
- Antenna Connection: Connect the vehicle's antenna cable to the unit's antenna input.
- USB Connection: Connect the rear USB input cable to a convenient location for device connection.
- Microphone Connection: Plug the microphone into the designated input and route it to a suitable location for clear voice pickup.
- Parking Brake Wire: Connect the parking brake wire as per local regulations for video playback safety.
4.2 Mounting the Unit
Secure the unit in the vehicle's dashboard using the provided mounting hardware. Ensure it is firmly seated and does not obstruct any vehicle controls or airbags.
5. Setup
5.1 Initial Power-On
After installation, turn on your vehicle's ignition. The unit should power on automatically. Follow the on-screen prompts for initial setup, including language selection and time zone.
5.2 Bluetooth Pairing
- On the unit's main menu, select the 'Bluetooth' icon.
- Enable Bluetooth on your mobile device and search for available devices.
- Select 'KW-M75BT' from the list on your device.
- Confirm the pairing code on both the unit and your device.
- Once paired, your device will automatically connect when in range.
6. Operating Instructions
6.1 Basic Controls
- Power Button: Press to turn the unit on/off. Hold to enter standby mode.
- Volume Control: Use the on-screen controls or steering wheel controls (if connected) to adjust volume.
- Home Button: Returns to the main menu.
- Source Selection: Tap the 'Source' icon to switch between Radio, USB, Bluetooth Audio, Apple CarPlay, Android Auto, etc.
6.2 Apple CarPlay
Connect your iPhone to the unit's USB port. Apple CarPlay will launch automatically, mirroring your iPhone's compatible apps on the receiver's display. Use the touchscreen or Siri voice commands for navigation, communication, and entertainment.

Figure 1: Apple CarPlay interface on the JVC KW-M75BT.
6.3 Android Auto
Connect your Android phone to the unit's USB port. Android Auto will launch, providing access to Google Maps, Google Assistant, and other compatible apps. Interact using the touchscreen or voice commands.

Figure 2: Android Auto interface with Google Maps on the JVC KW-M75BT.
6.4 USB Playback
Insert a USB storage device containing audio or video files into the USB port. The unit will automatically detect the device and display its contents. Navigate through folders and select files using the touchscreen.
- Supported Audio Formats: MP3, WMA, AAC, FLAC, DSD
- Supported Video Formats: MP4, H.264, WMV, MPEG1, MPEG2, MPEG4, AVI, MKV
- Supported Image Formats: JPEG, PNG, BMP
6.5 AM/FM Radio
Select the 'Radio' source. Use the 'Seek' buttons to find stations or manually tune using the on-screen controls. Save your favorite stations as presets for quick access.
- Presets: 15 FM / 5 AM
6.6 Audio Settings
Access the 'Audio' menu to adjust sound parameters such as equalizer settings, fader, balance, subwoofer level, and high-pass/low-pass filters to optimize your listening experience.
7. Maintenance
- Cleaning the Display: Use a soft, dry cloth to gently wipe the touchscreen. For stubborn smudges, slightly dampen the cloth with water or a screen cleaner designed for electronics. Do not use abrasive cleaners.
- Firmware Updates: Periodically check the JVC website for firmware updates to ensure optimal performance and access to new features. Follow the instructions provided with the update carefully.
- General Care: Avoid placing heavy objects on the unit or exposing it to excessive force.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Incorrect wiring, blown fuse | Check power connections and vehicle fuses. Consult an installer. |
| No sound | Volume too low, incorrect speaker wiring, mute activated | Increase volume. Check speaker connections. Deactivate mute function. |
| Bluetooth not connecting | Device not in pairing mode, unit not discoverable, interference | Ensure both devices are in pairing mode. Delete previous pairings and try again. Move closer to the unit. |
| Apple CarPlay/Android Auto not launching | Incorrect USB cable, phone not compatible, parking brake not engaged | Use a certified USB cable. Ensure phone is compatible and updated. Engage parking brake. |
| Unit reboots randomly | Loose power connection, firmware issue | Check power wiring. Perform a firmware update if available. |
9. Specifications
- Model: KW-M75BT
- Display: 6.8-inch Touchscreen LCD
- Power Output: Peak: 50W x 4 channels, RMS: 22W x 4 channels
- Preamp Outputs: 3 Sets of 4V (Front, Rear, Subwoofer)
- USB Input: Rear USB
- Bluetooth: Built-in for hands-free calling and audio streaming
- Smartphone Integration: Apple CarPlay, Android Auto
- Radio Tuner: AM/FM with 15 FM / 5 AM presets
- Supported Audio Formats: MP3, WMA, AAC, MP4, FLAC, DSD
- Supported Video Formats: H.264, WMV, MPEG1, MPEG2, MPEG4, AVI, MKV
- Supported Image Formats: JPEG, PNG, BMP
- Dimensions (W x H x D): 7.17 x 4.41 x 6.02 inches (approx.)
- Weight: 3.7 pounds (approx.)
10. Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official JVC website. Keep your proof of purchase for warranty claims.
Online Resources:
- JVC Official Website: www.jvc.com





