Beurer LB37
Contents
Beurer LB37 2-in-1 Essential Oil Diffuser & Air Humidifier Instruction Manual
Model: LB37 | Brand: Beurer
1. Introduction
The Beurer LB37 is a versatile 2-in-1 device designed to function as both an ultrasonic air humidifier and an essential oil diffuser. It aims to improve indoor air quality by adding moisture and allowing for the diffusion of pleasant aromas. This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your device.
Key features include a 2-liter water tank, night mode for quiet operation, automatic shut-off for safety, and compatibility with aroma pads for essential oil diffusion.

Image 1.1: The Beurer LB37 2-in-1 Essential Oil Diffuser and Air Humidifier.
2. Important Safety Information
- Read all instructions carefully before use and keep them for future reference.
- Ensure the device is placed on a stable, flat, and water-resistant surface.
- Do not place the device near heat sources or in direct sunlight.
- Only use clean, cool tap water. Do not add hot water or other liquids to the water tank.
- Unplug the device before filling, cleaning, or moving it.
- Keep out of reach of children and pets.
- Do not block the mist outlet.
- Only use essential oils specifically designed for diffusers and follow their instructions.
- The device features an automatic shut-off function when the water tank is empty.
3. Product Overview and Components
The Beurer LB37 consists of a base unit, a removable water tank, a mist outlet, and an aroma compartment. Familiarize yourself with these components before operation.

Image 3.1: The Beurer LB37 highlighting its 2-stage micro-fine atomization levels.

Image 3.2: Close-up of the Beurer LB37's one-button control for easy operation.
4. Setup and Initial Use
- Placement: Place the humidifier on a firm, flat, and water-resistant surface, away from direct sunlight or heat sources.
- Fill Water Tank: Remove the water tank from the base. Unscrew the cap at the bottom of the tank and fill it with clean, cool tap water. The tank has a 2-liter capacity. Securely screw the cap back on.
- Replace Tank: Place the filled water tank back onto the base unit, ensuring it is seated correctly.
- Add Aroma (Optional): If using the aroma diffuser function, pull out the aroma compartment tray located at the base. Place one of the included aroma pads into the tray. Add a few drops of your preferred essential oil onto the pad. Slide the tray back into the device.
- Connect Power: Plug the power cord into a suitable electrical outlet.

Image 4.1: Filling the easy-fill water tank.

Image 4.2: The Beurer LB37 comes with 10 aroma pads.

Image 4.3: Adding essential oil to the aroma pad.
5. Operating Instructions
The Beurer LB37 features a simple one-button control for all functions.
- Power On/Off: Press the power button once to turn the device on. Press and hold the button for a few seconds to turn it off.
- Adjust Mist Level: The device offers three mist levels:
- Level 1 (Low): Press the power button once after turning on.
- Level 2 (High): Press the power button a second time.
- Night Mode: Press the power button a third time to activate Night Mode. In this mode, the device operates at a low mist level, and all indicator lights are turned off for undisturbed sleep.
- Automatic Shut-off: The device will automatically shut off when the water tank is empty, indicated by a red light. This safety feature prevents damage to the unit.

Image 5.1: The quiet operation of the LB37 is ideal for nighttime use.

Image 5.2: The automatic shut-off feature for safety and convenience.
6. Maintenance and Cleaning
Regular cleaning is essential to ensure optimal performance and hygiene of your humidifier and diffuser.
- Daily Maintenance: Empty any remaining water from the tank and base. Rinse the water tank and base with fresh water.
- Weekly Cleaning:
- Unplug the device and remove the water tank.
- Pour a small amount of white vinegar into the water tank and base to help remove mineral buildup. Let it sit for 15-20 minutes.
- Use a soft brush or cloth to gently clean the inside of the tank and the ultrasonic membrane in the base.
- Rinse all components thoroughly with clean water until the vinegar smell is gone.
- Wipe all surfaces dry with a clean cloth.
- Aroma Pad Replacement: Replace the aroma pad when it becomes discolored or when you wish to change essential oil scents. Additional aroma pads are available for purchase.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist is produced. | Water tank is empty or not properly seated. Device is not plugged in. Ultrasonic membrane is dirty. | Refill water tank and ensure it's correctly placed. Check power connection. Clean the ultrasonic membrane as per maintenance instructions. |
| Weak mist output. | Low water level. Mineral buildup on ultrasonic membrane. | Ensure water tank is full. Clean the ultrasonic membrane. |
| Unpleasant odor. | Stagnant water or dirty tank. | Empty and clean the water tank and base thoroughly. Use fresh water daily. |
| Water leakage. | Water tank cap not secured. Tank not seated correctly. | Ensure the water tank cap is tightly screwed. Re-seat the water tank firmly on the base. |
8. Technical Specifications
- Model: LB37
- Product Dimensions: 7 x 4 x 8 inches
- Weight: 1.9 Pounds
- Water Tank Capacity: 2.0 Liters (0.52 Gallons)
- Mist Output: Up to 6.8 fl. oz./h (High), 5.0 fl. oz./h (Low/Night Mode)
- Operation Mode: Ultrasonic
- Special Features: Auto Shut Off, Cool Mist, Night Mode, Aroma Diffuser Function
- Recommended Room Size: Up to 215 sq ft
- Manufacturer: Beurer

Image 8.1: Dimensions of the Beurer LB37.
9. Warranty and Support
Beurer products are manufactured to the highest quality standards. In the event of a defect, please contact our customer support team. For any questions or assistance, our friendly Florida-based team is available to help.
Please refer to the warranty card included with your product for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.