Drive Medical Automatic Deluxe Blood Pressure Monitor

Introduction

This manual provides essential information for the safe and effective use of your Drive Medical Automatic Deluxe Wrist Blood Pressure Monitor. Please read all instructions carefully before use and retain this manual for future reference. This device is designed for home use to measure systolic and diastolic blood pressure and pulse rate from the wrist.

Safety Information

• Consult your physician before using this device if you have any medical conditions.
• Do not use this device for diagnosis or treatment of any health problem or disease.
• Keep out of reach of children.
• Do not use the device in a moving vehicle.
• Avoid strong electromagnetic fields during use.
• Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Package Contents

Verify that all items are present in the package:

• Drive Medical Automatic Deluxe Wrist Blood Pressure Monitor
• Wrist Cuff
• 2 AAA Batteries
• Complimentary Travel Case
• User Manual (this document)

Image: Drive Medical Automatic Deluxe Blood Pressure Monitor retail packaging.

Product Overview

The monitor features a large LCD display for clear readings and intuitive buttons for operation.

Image: Front view of the monitor with the display off, showing the 'SET', 'START/STOP', and 'M' buttons.

• Display: Large LCD screen for showing blood pressure (SYS/DIA), pulse rate (PUL), date, and time.
• SET Button: Used for setting date, time, and user profiles.
• START/STOP Button: Initiates and stops a measurement.
• M (Memory) Button: Accesses stored measurement data.
• WHO Indicator: Color-coded bar on the left side of the display to compare readings with World Health Organization standards.

Setup

1. Battery Installation

1. Open the battery compartment cover on the back of the monitor.
2. Insert the two AAA batteries, ensuring correct polarity (+ and -).
3. Close the battery compartment cover securely.

2. Setting Date and Time

1. With the unit off, press and hold the 'SET' button until the year flashes.
2. Use the 'M' button to adjust the year, then press 'SET' to confirm.
3. Repeat this process for month, day, hour, and minute.
4. Press 'SET' again to exit the setting mode.

Operating Instructions

1. Applying the Wrist Cuff

1. Sit comfortably with your arm resting on a flat surface.
2. Slide the monitor onto your left wrist with the display facing up. The cuff should be positioned approximately 1-2 cm above your wrist joint.
3. Ensure the cuff is snug but not too tight. It should fit wrists with a circumference between 5.3 to 8.5 inches (13.5 to 21.5 cm).
4. Position your wrist at heart level. You may support your elbow with your other hand or a cushion.

Image: The monitor correctly placed on a wrist, displaying a blood pressure reading.

2. Taking a Measurement

1. Once the cuff is correctly positioned and your wrist is at heart level, press the 'START/STOP' button.
2. The cuff will automatically inflate. Remain still and silent during the measurement.
3. The display will show your systolic pressure (SYS), diastolic pressure (DIA), and pulse rate (PUL) once the measurement is complete.
4. The WHO indicator on the left will light up to show your blood pressure category.
5. The device will automatically store the reading and shut off after a period of inactivity to conserve battery life.

3. Irregular Heartbeat Detection

This monitor can detect an irregular heartbeat (IHB). If an irregular heartbeat is detected during the measurement, an IHB symbol will appear on the display. If this symbol appears frequently, consult your physician.

Video Demonstration

A video demonstrating the use of the Drive Medical Automatic Deluxe Blood Pressure Monitor is available. This video shows how to apply the cuff to the wrist and initiate a measurement. It highlights the large display and the compact size of the device. The video also mentions that the monitor runs on two AAA batteries (included) and comes with a carrying case. The video concludes by showing a successful blood pressure and heart rate reading on the clear, easy-to-read display.

Note: Due to content creator type restrictions, the video cannot be embedded directly in this manual.

Memory Function

The monitor can store up to 120 readings (60 uses per person for two users).

1. Press the 'M' button when the unit is off.
2. The most recent reading will be displayed first.
3. Press the 'M' button repeatedly to scroll through previous readings.
4. To clear all memory, press and hold the 'M' button for approximately 5 seconds until 'CLr' appears and then disappears.

Maintenance

• Clean the monitor and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Store the device in its complimentary travel case when not in use to protect it from dust and damage.
• Remove batteries if the device will not be used for an extended period to prevent leakage.
• Avoid extreme temperatures, humidity, and direct sunlight.

Troubleshooting

Specifications

• Model: BP3200
• Product Dimensions: 4.13 x 3.27 x 3.27 inches
• Item Weight: 8.48 ounces (0.53 Pounds)
• Power Source: 2 AAA batteries (included)
• Display Type: LCD
• Cuff Circumference: 5.3 to 8.5 inches (13.5 to 21.5 cm)
• Memory: 120 readings (60 per user for 2 users)
• Manufacturer: Drive Medical
• Country of Origin: China

Warranty & Support

This product is backed by a 2-year protection plan. For warranty claims, technical support, or additional assistance, please contact Drive Medical customer service. Refer to the contact information provided with your purchase documentation or visit the official Drive Medical website.

Online Resources: A PDF user manual may be available for download at the manufacturer's website or via the following link: User Manual (PDF)