1. Product Overview
This document provides essential information for the Viking Open Button Assembly, Model PM120103. This component is designed as a replacement part for specific Viking appliances, ensuring proper functionality of the open button mechanism.
The assembly is a critical part for maintaining the operational integrity of the appliance it is installed in.
Figure 1.1: Side view of the Viking Open Button Assembly (PM120103). This image shows the elongated body with a metallic top surface and a black base, featuring a protruding T-shaped component on one end.
2. Setup and Installation
The Viking Open Button Assembly (PM120103) is a specialized replacement part. Proper installation is crucial for its correct function and the safety of the appliance.
2.1 Pre-Installation Checklist
- Ensure the appliance is disconnected from its power source before beginning any installation.
- Verify that the new part, PM120103, matches the original part being replaced.
- Gather necessary tools, which may include screwdrivers, pliers, and protective gloves.
2.2 Installation Procedure
- Carefully remove the outer casing or panel of the appliance to access the existing button assembly. Refer to your appliance's specific service manual for detailed disassembly instructions.
- Disconnect any wiring or connectors attached to the old button assembly. Note their positions for re-connection.
- Remove the old button assembly.
- Position the new Viking Open Button Assembly (PM120103) in the designated slot.
- Secure the assembly using the appropriate fasteners.
- Reconnect any wiring or connectors, ensuring they are firmly attached and correctly oriented.
- Carefully reassemble the appliance casing or panel.
Warning: Installation should ideally be performed by a qualified technician to prevent damage to the appliance or personal injury.
Figure 2.1: Top-down view of the Viking Open Button Assembly (PM120103). This perspective highlights the brushed metallic finish of the top surface and the compact design of the component.
3. Operation
Once correctly installed, the Viking Open Button Assembly (PM120103) facilitates the intended function of the appliance's open mechanism. Its operation is integrated with the appliance's control system.
- The button assembly is designed to provide a tactile response when pressed, activating the corresponding function (e.g., opening a door or lid).
- Ensure the button moves freely and returns to its original position after being pressed.
- If the button does not respond as expected, refer to the Troubleshooting section.
4. Maintenance
The Viking Open Button Assembly (PM120103) is designed for durability and typically requires minimal maintenance after proper installation.
- Keep the area around the button clean and free from debris. Use a soft, damp cloth for cleaning the exterior surfaces of the appliance.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or internal components.
- Periodically check for any loose connections or signs of wear, especially if the appliance is frequently used.
If the button's functionality degrades, it may indicate a need for further inspection or replacement of the assembly.
5. Troubleshooting
This section addresses common issues that may arise with the Viking Open Button Assembly (PM120103) after installation.
| Problem | Possible Cause | Solution |
|---|---|---|
| Button does not respond when pressed. |
|
|
| Button feels stiff or sticky. |
|
|
| Appliance function not activating after button press. |
|
|
If troubleshooting steps do not resolve the issue, it is recommended to contact a qualified appliance repair technician.
6. Specifications
| Attribute | Detail |
|---|---|
| Brand | Viking |
| Model Number | PM120103 |
| Part Number | PM120103 |
| Description | Open Button Assembly |
| Manufacturer | Viking |
| ASIN | B06XBLZWLC |
| Batteries Included? | No |
| Batteries Required? | No |
| Date First Available | February 26, 2017 |
7. Warranty and Support
7.1 Product Warranty
Specific warranty information for the Viking Open Button Assembly (PM120103) is typically provided at the point of purchase or by the manufacturer. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the documentation included with your purchase or contact Viking customer service directly.
7.2 Customer Support
For technical assistance, installation queries, or to report issues with the Viking Open Button Assembly, please contact Viking customer support or the authorized dealer from whom the part was purchased.
When contacting support, please have the model number (PM120103) and your purchase details readily available.
