1. Introduction
This manual provides detailed instructions for the safe and effective operation of your GODOX Thinklite TT685C TTL Camera Flash Speedlight. The TT685C is a versatile flash unit designed for Canon EOS DSLR cameras, featuring E-TTL II autoflash, 2.4GHz wireless transmission, high-speed sync up to 1/8000s, and a guide number of GN60. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage to the unit or your camera.
2. Product Overview
The GODOX TT685C offers advanced flash capabilities for professional and enthusiast photographers. Key features include:
- E-TTL II Autoflash: Automatic flash exposure control for Canon cameras.
- 2.4GHz Wireless Transmission: Built-in system for reliable wireless flash control over distances up to 100 meters.
- High-Speed Sync (HSS): Flash synchronization at shutter speeds up to 1/8000 seconds.
- Guide Number (GN60): Powerful light output for various shooting conditions.
- Multi/Stroboscopic Flash: Fires a series of rapid flashes to capture multiple movements in a single exposure.
- Auto and Manual Zoom: Flash coverage adjustable from 20mm to 200mm.
- First-Curtain and Second-Curtain Sync: Creative control over flash timing relative to the shutter.
- Dot-Matrix LCD Panel: Clear display for easy navigation and settings adjustment.

Figure 2.1: GODOX TT685C Flash unit with included accessories (color filters, cleaning cloth, diffuser).

Figure 2.2: Front and rear views of the GODOX TT685C, showing the flash head, control panel, and battery compartment.
3. Setup
3.1 Battery Installation
The TT685C requires four (4) AA batteries for operation. Use high-quality alkaline or Ni-MH rechargeable batteries for optimal performance.
- Locate the battery compartment door on the side of the flash unit.
- Slide the battery compartment door latch and open the door.
- Insert four AA batteries according to the polarity indicators (+/-) inside the compartment.
- Close the battery compartment door securely until it clicks into place.

Figure 3.1: Open battery compartment showing battery insertion.
3.2 Mounting on Camera
To attach the TT685C to your Canon DSLR camera:
- Ensure both the flash and camera are powered off.
- Slide the flash's mounting foot into the camera's hotshoe.
- Rotate the locking ring on the flash unit clockwise until it is securely tightened. Do not overtighten.
3.3 Powering On/Off
To power on the flash, slide the ON/OFF switch to the ON position. The LCD panel will illuminate. To power off, slide the switch to the OFF position.
4. Operating Instructions
4.1 Flash Modes
Press the MODE button to cycle through the available flash modes:
- E-TTL II (TTL): Automatic flash exposure. The flash output is automatically adjusted by the camera.
- Manual (M): Manually set the flash output power (1/1 to 1/128).
- Multi (Stroboscopic): Fires a rapid series of flashes during a single exposure. Set the flash frequency, flash count, and flash output.

Figure 4.1: The LCD panel indicating various TTL functions and flash modes.
4.2 Zoom Function
The flash head's zoom coverage can be adjusted from 20mm to 200mm.
- Auto Zoom: The flash automatically adjusts its zoom position to match the focal length of the lens.
- Manual Zoom: Press the ZOOM button and use the select dial to manually set the desired flash coverage.

Figure 4.2: The dot-matrix LCD panel displaying settings, including zoom.
4.3 Wireless Flash Operation (2.4GHz)
The TT685C features a built-in 2.4GHz wireless system for master or slave operation. This allows for off-camera flash control and multi-flash setups.
- Master Mode: The TT685C can control other GODOX 2.4GHz wireless flashes.
- Slave Mode: The TT685C can be triggered by a GODOX 2.4GHz wireless transmitter (e.g., X1C, XProC, X2TC, X3C) or another GODOX flash in master mode.
- To activate wireless mode, press the wireless button (often indicated by a lightning bolt icon with radio waves).
- Set the channel and group to match the master unit/transmitter.

Figure 4.3: The GODOX TT685C can be used with an external wireless trigger like the GODOX X1C (sold separately) for advanced off-camera flash control.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the flash unit. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use solvents or abrasive cleaners.
- Storage: When not in use for extended periods, remove the batteries to prevent leakage. Store the flash in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the flash or subjecting it to strong impacts. Protect the flash tube and LCD panel from scratches.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire. |
|
|
| Flash output is too weak/strong. |
|
|
| Wireless trigger not working. |
|
|
| Flash not compatible with newer Canon DSLR models. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Model | TT685C |
| Compatible Cameras | Canon EOS DSLR cameras (E-TTL II autoflash) |
| Guide Number (GN) | 60 (m ISO 100, @200mm) |
| Flash Coverage | 20 to 200mm (Auto/Manual Zoom) |
| Flash Duration | 1/300 to 1/20000 seconds |
| Exposure Control System | E-TTL II Autoflash, Manual Flash, Multi Flash |
| Sync Mode | High-Speed Sync (up to 1/8000s), First-Curtain Sync, Second-Curtain Sync |
| Wireless Flash Function | Master, Slave, Off |
| Wireless Transmission | 2.4GHz radio transmission (approx. 100m range) |
| Power Source | 4x AA batteries |
| Dimensions (W x H x D) | 7.5 x 3 x 2.5 inches (approx. 190 x 76 x 64 mm) |
| Weight (without batteries) | 1.32 pounds (approx. 599g) |
| Item Model Number | GD00001_TT685C |
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your authorized GODOX dealer or visit the official GODOX website. Keep your purchase receipt as proof of purchase for warranty claims.
Official GODOX Website: www.godox.com