Product Overview
The Jensen XRV10 is a mechless multimedia system featuring a large 10.1-inch capacitive touchscreen. Designed with a standard double DIN chassis, it integrates seamlessly into various vehicle dashboards. A key feature is its three camera inputs, eliminating the need for an external switcher box for multiple camera views. This system offers advanced connectivity and audio-visual capabilities for an enhanced in-vehicle experience.
Figure 1: Front view of the Jensen XRV10 multimedia receiver, showing the 10.1-inch touchscreen display with various input options and control buttons on the left side.
Key Features
- 10.1" Capacitive Touchscreen: Large, responsive display for intuitive control.
- Bluetooth Connectivity: Supports streaming audio and hands-free calling.
- Three Camera Inputs: Dedicated inputs with built-in triggers for reverse gear, left, and right blinkers, allowing for comprehensive vehicle observation.
- HDMI/MHL Connectivity: Rear input for high-definition media playback from compatible devices.
- Audio/Video Playback: Supports playback via USB.
- Smart Device Connection: Connects to smart devices via USB.
- Front AUX and USB Inputs: Convenient access for external audio sources and USB devices.
- RCA Line Output: Includes front, rear, and subwoofer outputs for external amplification.
- Pre-set Equalizer Modes: Offers various audio presets (rock, jazz, classical, talk radio).
- Customizable Illumination: Users can modify background illumination with 18 million color options.
- Customizable Speaker Zone: Adjust speaker balance (left/right and front/back).
- Wireless Remote: Included for convenient control.
- Clock Functionality: Integrated time display.
Figure 2: Product capabilities overview, highlighting the main features of the Jensen XRV10 multimedia system.
Setup and Installation
The Jensen XRV10 is designed for a standard double DIN chassis installation. Professional installation is recommended due to the complexity of vehicle electrical systems and multimedia connections.
Wiring Connections
The unit includes a blunt cut harness for all necessary power, ground, speaker, and accessory connections. Ensure all connections are secure and properly insulated to prevent short circuits and ensure optimal performance.
- Power (Yellow): Connect to constant 12V power source.
- Accessory (Red): Connect to switched 12V accessory power.
- Ground (Black): Connect to vehicle chassis ground.
- Speaker Outputs: Connect to vehicle speakers (Front Left, Front Right, Rear Left, Rear Right). Observe polarity.
- Camera Inputs: Connect up to three cameras (e.g., rear view, left side, right side) to the dedicated video inputs. Utilize the built-in trigger wires for automatic camera activation (reverse gear, left/right blinkers).
- HDMI/MHL Input: Connect compatible devices for high-definition video and audio.
- RCA Outputs: Connect to external amplifiers for front, rear, and subwoofer channels.
- USB/AUX Inputs: Connect external storage devices or audio sources to the front panel inputs.
Refer to the detailed wiring diagram provided with your product for specific wire colors and functions. Improper wiring can damage the unit or vehicle electrical system.
Operating Instructions
Basic Operation
- Power On/Off: Press and hold the power button (usually on the left side) to turn the unit on or off.
- Volume Control: Use the rotary knob or touchscreen controls to adjust volume.
- Source Selection: Tap the desired icon on the touchscreen (e.g., Radio, USB, BT, HDMI/MHL, Camera) to select the input source.
Bluetooth Pairing
- Ensure Bluetooth is enabled on your mobile device.
- On the XRV10, select the "BT" source.
- Search for available devices on your mobile phone. The XRV10 should appear as "Jensen XRV10" or similar.
- Select the XRV10 to pair. Confirm any pairing codes if prompted.
- Once paired, you can stream audio and make/receive hands-free calls.
Camera System
The XRV10 supports up to three camera inputs. The system automatically switches to the corresponding camera view when the vehicle is in reverse or when the left/right turn signals are activated (if wired correctly). You can also manually select camera views from the main menu.
Audio Settings
- Equalizer: Access the EQ settings to choose from pre-set modes (e.g., Rock, Jazz, Classical, Talk Radio) or customize your own sound profile.
- Speaker Zone Control: Adjust the fader and balance settings to optimize sound distribution within your vehicle.
Display Customization
Navigate to the display settings to change the background illumination color (18 million options) to match your vehicle's interior lighting or personal preference.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Jensen XRV10.
- Screen Cleaning: Use a soft, lint-free cloth specifically designed for electronic screens. Do not use abrasive cleaners, solvents, or alcohol-based solutions, as these can damage the touchscreen surface. Gently wipe the screen to remove dust and fingerprints.
- General Cleaning: Wipe the unit's exterior with a soft, dry cloth. Avoid spraying liquids directly onto the unit.
- Software Updates: Check the Jensen official website periodically for any available firmware or software updates. Follow the instructions carefully for any update procedures.
Troubleshooting
If you encounter issues with your XRV10, refer to the following common problems and solutions before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power connection; Blown fuse; Improper wiring. | Check power and ground connections. Inspect vehicle fuses and the unit's fuse. Verify wiring according to the installation guide. |
| No sound from speakers. | Speaker wires disconnected; Incorrect speaker polarity; Volume too low; Mute activated. | Check all speaker connections. Ensure correct polarity. Increase volume. Deactivate mute function. |
| Bluetooth connection issues. | Device not in pairing mode; Interference; Software glitch. | Ensure both devices are in pairing mode. Move closer to the unit. Try restarting both the XRV10 and your mobile device. Clear previous Bluetooth pairings and re-pair. |
| USB/HDMI input not recognized or freezes. | Incompatible file format; Damaged cable; Software issue. | Ensure media files are in supported formats. Try a different USB drive or HDMI cable. Restart the unit. If persistent, a firmware update might be needed. |
| Screen glare makes it unusable. | Environmental lighting conditions. | Adjust screen brightness and contrast settings. Consider installing an anti-glare screen protector (though effectiveness may vary). Reposition vehicle if possible to reduce direct sunlight. |
Specifications
Detailed technical specifications for the Jensen XRV10 multimedia receiver.
| Category | Specification |
|---|---|
| Product Dimensions | 10 x 6 x 6 inches |
| Item Weight | 6.9 pounds |
| ASIN | B06X9GRM37 |
| Item model number | XRV10 |
| Is Discontinued By Manufacturer | No |
| Date First Available | February 23, 2017 |
| Manufacturer | ASA Electronics |
| Brand | Jensen |
| Connectivity Technology | Auxiliary, Bluetooth, HDMI, RCA, USB |
| Controller Type | IOS |
| Special Feature | Equalizer |
| Compatible Devices | Smartphone, Speaker |
| Total HDMI Ports | 1 |
| Connector Type | HDMI, RCA, USB |
| Audio Encoding | Stereo |
| Audio Output Mode | Stereo |
| Operating Voltage Range | 10 V to 16 V |
| Current Draw @ 12V (Quiescent) | 30mA |
| Current Draw @ 12V (Standby) | 1.0A |
| Current Draw @ 12V (Maximum) | 10A |
| Operating Temperature Range | -4°F to 149°F (-20°C to 65°C) |
| Storage Temperature Range | -22°F to 185°F (-30°C to 85°C) |
| Maximum Relative Humidity | 95% |
| FM Sensitivity | 1.4 uV |
| AM Sensitivity | 22 uV |
| Audio Frequency Response | 20 Hz to 20KHz |
| Signal to Noise | 70 dB |
| Output RMS | 19 W @10%THD |
| Output Maximum | 40W x 4 |
| Total Harmonic Distortion | 0.5% |
| LCD Brightness | 500 cd/ml |
| LCD Contrast Ratio | 500 |
| LCD Resolution | 1024x600 |
Figure 3: Technical specifications and dimensional drawing of the Jensen XRV10 multimedia system.
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Jensen website. Keep your proof of purchase for warranty claims.
Manufacturer: ASA Electronics
Brand Website: www.jensenmobile.com
For specific product inquiries or troubleshooting not covered in this manual, please contact Jensen customer service.
