Wise Pro-Angler Bass Bucket Seat Set

1. Product Overview

The Wise Pro-Angler Bass Bucket Seat Set is designed for marine environments, offering durability and comfort. This 2-unit set features a robust marine-grade frame, high-compression OEM-grade molded foam, and marine-grade 28 oz. vinyl. The vinyl is engineered to resist the effects of sun, heat, rain, and soiling under normal conditions, ensuring longevity. Double top-stitch construction enhances durability and appearance. A key feature is the removable center panel, allowing for versatile mounting against a boat bulkhead. The seat bottom incorporates a piano hinge for secure flat-surface mounting. This set is designed to occupy approximately 48 inches of seating space and is compatible with other Wise Pro-Angler Series seating components for a cohesive boat interior.

Figure 1: Front view of the Wise Pro-Angler Bass Bucket Seat Set.

2. Setup and Installation

This section provides general guidelines for installing your Wise Pro-Angler Bass Bucket Seat Set. Proper installation is crucial for safety and product longevity. If you are unsure about any steps, it is recommended to seek professional assistance.

2.1 Unpacking

Carefully remove all components from the packaging. Inspect all parts for any signs of damage. Contact customer support immediately if any parts are missing or damaged.

2.2 Mounting Considerations

• The seat set is designed for flat-surface mounting using the integrated aluminum piano hinges on the seat bottom.
• Ensure the mounting surface on your boat is structurally sound and capable of supporting the seats and occupants.
• The 2-unit set requires approximately 48 inches of linear space for installation. Measure your intended mounting area to confirm fit.
• The center panel of the seat is removable, allowing for flexible mounting configurations, including against a boat bulkhead.

2.3 Installation Steps (General)

1. Position the seat set on the desired mounting location.
2. Mark the drilling points through the pre-drilled holes in the piano hinges.
3. Remove the seats and drill pilot holes into the mounting surface, ensuring appropriate drill bit size for your fasteners (not included).
4. Reposition the seats and secure them using marine-grade fasteners (e.g., stainless steel bolts, washers, and nuts) appropriate for your boat's construction. Ensure all fasteners are tightened securely.

Figure 2: Front view of the seat set, illustrating the overall form for mounting.

3. Operating and Usage

The Wise Pro-Angler Bass Bucket Seat Set is designed for comfortable and durable use in various marine conditions. Its high-compression molded foam padding provides comfort for extended periods, making it suitable for long fishing trips.

• Comfort: The compression molded marine-grade foam padding is engineered for ultimate comfort, allowing users to fish all day without discomfort.
• Durability: The marine-grade 28 oz. vinyl and double-stitched details are built to withstand harsh marine environments, including exposure to sun, heat, rain, and common soiling.
• Versatility: The removable center panel offers flexibility in how the seats are arranged or integrated into your boat's existing structure.

Figure 3: Side view of the seat set, highlighting its profile and design.

4. Maintenance and Care

Proper maintenance will extend the life and preserve the appearance of your Wise Pro-Angler Bass Bucket Seat Set.

4.1 Cleaning the Vinyl

• For general cleaning, wipe the vinyl surfaces with a soft cloth dampened with mild soap and water.
• Rinse thoroughly with clean water to remove any soap residue.
• Dry the seats completely with a clean, dry cloth to prevent water spots or mildew.
• Avoid using harsh chemicals, abrasive cleaners, or stiff brushes, as these can damage the marine-grade vinyl.
• For stubborn stains, use a marine vinyl cleaner specifically designed for boat upholstery, following the product's instructions.

4.2 Protection

• While the vinyl is resistant to sun and heat, prolonged exposure to direct sunlight can still cause fading over time. Consider using a boat cover when the seats are not in use.
• Regularly inspect the mounting hardware for tightness and corrosion. Tighten any loose fasteners and replace corroded hardware as needed.
• Ensure proper ventilation to prevent mildew growth, especially in humid environments.

5. Troubleshooting

This section addresses common concerns you might encounter with your seat set. For issues not covered here, please refer to the Support section.

5.1 Loose Seats

If the seats feel loose or wobbly, check all mounting fasteners. Tighten any bolts or screws that may have come loose due to vibration or use. Ensure the mounting surface is not compromised.

5.2 Vinyl Discoloration or Stains

Refer to the Maintenance section for proper cleaning procedures. Ensure you are using appropriate marine-grade cleaning products. Promptly clean spills to prevent permanent staining.

5.3 Squeaking Noises

Squeaking may indicate friction between components or loose connections. Inspect the hinges and mounting points. Applying a marine-grade lubricant to hinges (if accessible and appropriate) may resolve the issue. Ensure all parts are securely fastened.

6. Specifications

Detailed specifications for the Wise Pro-Angler Bass Bucket Seat Set (Model 3303-1880).

Figure 4: Angled view of the seat set, showcasing design and material.

7. Warranty Information

The Wise Pro-Angler Bass Bucket Seat Set comes with a 2-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use. For specific details regarding coverage, limitations, and how to make a claim, please contact the manufacturer directly.

8. Support and Contact

For technical assistance, warranty claims, or any other inquiries regarding your Wise Pro-Angler Bass Bucket Seat Set, please contact the manufacturer:

• Manufacturer: The Wise Company Inc.
• Address: 670 Industrial Road, Savannah, TN 38372, USA
• Phone: 1-800-251-2622