Introduction
This manual provides essential information for the safe and efficient operation of your Xtricity LED Clip-On Desk Lamp, Model 1-69011. Please read these instructions thoroughly before use and retain them for future reference.
Safety Instructions
- Ensure the power supply voltage matches the lamp's requirements (120V).
- Do not use the lamp in wet or damp conditions. This product is for indoor use only.
- Always unplug the lamp from the power outlet before cleaning or replacing the bulb.
- Use only an E26 base bulb, not exceeding 60 watts. The included LED bulb is 6W.
- Keep the lamp away from flammable materials.
- Do not attempt to disassemble or repair the lamp yourself. Contact qualified service personnel for assistance.
- Ensure the clamp is securely fastened to a stable surface to prevent the lamp from falling.
Package Contents
Verify that all items are present in the package:
- 1 x Xtricity LED Clip-On Desk Lamp (Model 1-69011)
- 1 x 6W A19 LED Bulb (3000K Soft White)
Image: The Xtricity LED Clip-On Desk Lamp, showing the lamp, the included A19 LED bulb, and its retail packaging.
Product Features
- 360° Flexible Gooseneck: Allows for precise light positioning and direction.
- Integrated On/Off Switch: Conveniently located for easy operation.
- Durable Clamp Base: Provides secure attachment to various surfaces up to 2 inches thick, with scratch-free padding.
- E26 Ceramic Holder: High heat resistance for safe bulb operation.
- Included 6W A19 LED Bulb: Emits 450 lumens of 3000K soft white light, energy-efficient and long-lasting.
- 4ft 2-Prong Cord: Plugs into any standard 120V electrical outlet.
Image: Detailed view of the lamp's rotatory on/off switch, ceramic bulb holder, and flexible gooseneck.
Image: Detailed view of the lamp's strong, scratch-free clamp base and the US standard Type A plug.
Setup
- Unpack: Carefully remove all components from the packaging.
- Insert Bulb: Screw the provided 6W A19 LED bulb into the E26 ceramic socket until snug. Do not overtighten.
- Attach Lamp: Open the clamp base and securely attach it to a stable surface such as a desk, shelf, or headboard. Ensure the surface thickness is suitable for the clamp (up to 2 inches).
- Position Gooseneck: Adjust the flexible gooseneck to direct the light as desired. The gooseneck maintains its position once set.
- Connect Power: Plug the 2-prong power cord into a standard 120V electrical outlet.
Video: A demonstration of the lamp's flexible gooseneck and clamp base, showing how it can be adjusted and secured to various surfaces.
Operating Instructions
- Power On/Off: Locate the rotatory switch on the lamp head. Turn the switch clockwise to turn the lamp ON, and counter-clockwise to turn it OFF.
- Adjust Light Direction: Gently bend and twist the flexible gooseneck to position the light beam precisely where needed. The gooseneck is designed to hold its shape.
Image: The lamp clipped to a headboard, providing focused light for reading in bed.
Image: The lamp clipped to a desk, providing bright, flicker-free light for tasks.
Maintenance
- Cleaning: Disconnect the power before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and replace it with a new E26 base bulb, not exceeding 60 watts. The included LED bulb is designed for long life.
Image: Details of the included A19 LED bulb, highlighting its 6W power consumption, 3000K soft white light appearance, and 450 lumens brightness.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose bulb, faulty bulb, switch off. | Check power outlet, ensure plug is fully inserted. Tighten or replace bulb. Turn the rotatory switch clockwise. |
| Light flickers. | Loose bulb, unstable power. | Tighten the bulb. Try plugging into a different outlet. |
| Gooseneck does not hold position. | Excessive force or wear over time. | Ensure the gooseneck is not over-extended. If the issue persists, contact customer support. |
| Clamp is not secure. | Surface too thick or thin, improper attachment. | Ensure the surface is within the clamp's capacity (up to 2 inches). Re-position and ensure a firm grip. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 1-69011 |
| Brand | Xtricity |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage (Lamp) | 6 watts (with included bulb) |
| Maximum Compatible Wattage | 60 Watts |
| Bulb Base | E26 |
| Bulb Type | A19 LED (included) |
| Light Color | Soft White (3000K) |
| Brightness | 450 Lumens |
| Material | Metal, Plastic |
| Finish Type | Polished |
| Product Dimensions | 4.9"D x 4.9"W x 10.25"H |
| Item Weight | 1 Pound |
| Cord Length | 4 feet |
| Installation Type | Clip On |
| Control Method | Toggle Switch |
| Indoor/Outdoor Usage | Indoor Only |
Image: Product dimensions diagram, indicating height, shade diameter, and clamp size.
Warranty and Support
Xtricity products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided on your product packaging or visit the official Xtricity website. Please have your model number (1-69011) available when contacting support.
General Information
The following video provides a general overview of Xtricity's lighting solutions. While not specific to the operation of this particular lamp, it offers insight into the brand's commitment to efficient lighting.
Video: Xtricity - Efficient Lighting Solutions. This video showcases various lighting products and the brand's focus on efficiency and sustainability.
