SHYSKY SATLINK WS-6960 DVB-S/DVB-S2 Satellite Meter User Manual

1. Introduction

This manual provides detailed instructions for the proper use and maintenance of your SHYSKY SATLINK WS-6960 DVB-S/DVB-S2 Satellite Meter. This device is designed to assist in the installation and verification of digital satellite television services, offering comprehensive signal analysis capabilities in a portable format.

Please read this manual thoroughly before operating the device to ensure safe and efficient use.

2. Product Overview

2.1 Key Features

• 4.3-inch High Definition TFT LCD Screen for clear display.
• Fully compliant with DVB-S/DVB-S2, MPEG-2/MPEG4 standards.
• MPEG-2 / H.264 Hardware decoding support.
• Measures signal strength, quality, Bit Error Rate (BER), Signal-to-Noise Ratio (S/N), Power (PWR), and Modulation Error Ratio (MER).
• Supports various search modes: Auto, Blind, Manual, and NIT.
• Audible and visual alarms for signal locking.
• Automatic calculation of Azimuth (AZ) and Elevation (EL) angles.
• Supports DISEQC 1.0, 1.1, 1.2, and 22kHz Tone.
• Integrated speaker and support for both AV out and AV in.
• Equipped with a 7.4V/3000mAh Li-Ion battery for extended operation.
• Software upgradeable via USB port.

2.2 Package Contents

Verify that all items listed below are included in your package:

• 1 x SHYSKY SATLINK WS-6960 Digital Satellite Meter
• 1 x AV Cable
• 1 x Power Adapter (12V/1.5A DC)
• 1 x Car Charger Cable
• 1 x Silicone Case
• 1 x User Manual (this document)

Figure 2.2.1: Contents included in the SHYSKY SATLINK WS-6960 package. This image displays the satellite meter, AV cable, power adapter, car charger, and silicone case neatly arranged in their packaging.

2.3 Device Layout

Figure 2.3.1: Front view of the SHYSKY SATLINK WS-6960 Satellite Meter. The image shows the 4.3-inch LCD screen displaying the main menu with icons for Satellite Find, Sat Installation, Angle, Loop Search, USB Device, Channel, Media Center, and System Setting. Below the screen are indicator lights for Power, 22K, 13V/18V, Lock, and Charge. The keypad includes navigation buttons, numerical keys, and function buttons like TTXT, SUBT, TV/R, AUDIO, AV-S, INFO, MUTE, MENU, EXIT, F1-F4, and SCAN.

Figure 2.3.2: Back view of the SHYSKY SATLINK WS-6960 Satellite Meter. This image highlights the rear panel, including the integrated kickstand, speaker grille, and a label detailing power input (DC12V, 1.5A), input frequency (950-2150MHz), input level (-65 to -25dBm), input impedance (75Ω), and battery information (Li-Ion 3000mAh).

3. Safety Information

To ensure safe operation and prevent damage to the device or injury to yourself, please observe the following safety precautions:

• Do not expose the device to rain, moisture, or extreme temperatures.
• Avoid dropping or subjecting the device to severe impacts.
• Use only the provided power adapter and car charger. Using unauthorized accessories may damage the device and void the warranty.
• Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
• Keep the device away from strong magnetic fields.
• Ensure proper ventilation when operating or charging the device.
• Disconnect the power adapter during lightning storms or when unused for long periods.

4. Setup

4.1 Charging the Battery

Before first use, fully charge the device's internal Li-Ion battery. Connect the provided power adapter to the DC 12V input port on the device and plug it into a wall outlet. The "Charge" indicator light will illuminate. A full charge typically takes approximately 2-3 hours. The device can operate for up to 2 hours on a full charge.

Alternatively, use the car charger cable to charge the device in a vehicle.

4.2 Initial Power On

Press and hold the Power button located on the front panel to turn on the device. The main menu will appear on the LCD screen.

4.3 Connecting to an LNB

Connect the satellite dish's LNB cable to the F-type connector on the top of the WS-6960 device. Ensure the connection is secure.

5. Operating Instructions

5.1 Navigating the Menu

Use the directional arrow buttons (UP, DOWN, LEFT, RIGHT) to navigate through menu options. Press the OK button to confirm a selection or enter a submenu. Press EXIT to return to the previous menu or the main screen.

Figure 5.1.1: The SHYSKY SATLINK WS-6960 with its main menu visible, illustrating the central navigation pad (up, down, left, right, OK) and surrounding function buttons.

5.2 Satellite Find Function

This is the primary function for aligning your satellite dish.

1. From the main menu, select "Satellite Find" and press OK.
2. In the Satellite Find setup screen, you can configure parameters such as LNB Type, LNB Frequency, Transponder, Symbol Rate, Polarization, 22KHz Tone, and DiSEqC Mode. Use the arrow keys to adjust these settings according to your satellite provider's specifications.
3. Once settings are configured, the device will display signal strength and quality bars. Adjust your satellite dish's azimuth and elevation until the signal strength and quality are maximized. The device will provide an audible tone when a signal is locked.
4. The screen will also display BER, S/N, PWR, and MER values for detailed analysis.

Figure 5.2.1: The "Satellite Find Setup" screen on the WS-6960. This interface allows users to select LNB type, frequency, transponder, symbol rate, polarization, 22KHz tone, and DiSEqC mode for precise satellite alignment.

5.3 Transponder List

To view or edit transponder information:

1. From the main menu, navigate to the appropriate section (often within "Satellite Find" or "Channel" settings) to access the transponder list.
2. The list displays frequency, symbol rate, polarization, and RF info. You can add, edit, or delete transponders using the corresponding function buttons (e.g., F1 for Add, F2 for Edit, F3 for Delete).
3. Press SCAN to initiate a scan for channels on the selected transponder.

Figure 5.3.1: The "Transponder List" screen on the WS-6960. This view shows a table of transponders with their respective frequencies, symbol rates, and polarization. Signal strength and quality bars are also visible at the bottom.

5.4 System Settings

Customize device settings such as language, video resolution, and time zone.

1. From the main menu, select "System Setting" and press OK.
2. Adjust options like OSD Language, Country, Aspect Ratio, Video Resolution (e.g., 720P_50), HDMI Audio, Time Zone, System Lock, and PWR Unit.
3. Press EXIT to save changes and return.

Figure 5.4.1: The "System Setting" screen on the WS-6960. This menu allows users to configure various device parameters, including OSD Language, Country, Aspect Ratio, Video Resolution, HDMI Audio, Time Zone, System Lock, and PWR Unit.

5.5 Software Upgrade

The device's software can be upgraded via the USB port.

1. Download the latest firmware file from the official SHYSKY support website to a USB flash drive.
2. Insert the USB flash drive into the USB port on the WS-6960.
3. Navigate to the "USB Device" or "System Setting" menu and select the software upgrade option.
4. Follow the on-screen prompts to complete the upgrade. Do not power off the device during the upgrade process.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or solvents.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to approximately 50% and recharge every few months.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

7.1 No Power

• Ensure the battery is charged. Connect the power adapter and check if the "Charge" indicator lights up.
• Verify the power adapter is correctly plugged into a working outlet.
• Press and hold the Power button for a few seconds to ensure it's not a brief press.

7.2 No Signal or Weak Signal

• Check all cable connections between the LNB and the device. Ensure they are secure.
• Verify that the LNB Type, LNB Frequency, Transponder, and Polarization settings in the "Satellite Find" menu match your satellite provider's specifications.
• Ensure the satellite dish is correctly aimed at the satellite. Use the signal strength and quality meters to fine-tune the dish's position.
• Check for any obstructions between the satellite dish and the satellite.
• Inspect the LNB for damage or corrosion.

7.3 Screen Freezes or Device Unresponsive

• Press and hold the Power button for approximately 10 seconds to force a shutdown. Then, restart the device.
• If the issue persists, try performing a factory reset (if available in the System Settings menu). Note that this will erase all user-defined settings.

8. Specifications

9. Warranty and Support

The SHYSKY SATLINK WS-6960 Satellite Meter comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or warranty claims, please contact your retailer or the SHYSKY customer service department.

For the latest information, firmware updates, and additional support resources, please visit the official SHYSKY website.