1. Introduction
This manual provides essential information for the safe and efficient operation of your KING KB ECO2S Garage Heater. The KB ECO2S series offers advanced heating solutions with an integrated electronic thermostat and remote control, designed for energy-efficient 2-stage heating. It features an Eco mode, fan-only operation, and timer functions, making it suitable for primary or supplemental heating in garages, workshops, and similar large spaces.
Please read this manual thoroughly before installation and use, and retain it for future reference.
Image 1: KING KB ECO2S Garage Heater, showing the main unit, remote control, and mounting bracket.
2. Important Safety Information
WARNING: Risk of Fire, Electric Shock, or Injury to Persons.
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains, at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater, or return to authorized service facility for examination and/or repair.
- Do not use outdoors.
- This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to off, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- This heater must be hardwired by a qualified electrician. Do not attempt to install or service this unit yourself if you are not qualified.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- KING KB ECO2S Garage Heater Unit
- Universal Wall/Ceiling Mounting Bracket
- Remote Control
- Instruction Manual (this document)
Image 2: The heater unit, mounting bracket, and remote control as included in the package.
4. Installation
IMPORTANT: This heater requires hardwiring to a 240V electrical supply. Installation must be performed by a qualified, licensed electrician in accordance with all local and national electrical codes.
4.1 Mounting the Heater
The heater comes with a universal bracket for wall or ceiling mounting. Ensure the mounting surface is structurally sound and capable of supporting the heater's weight (approximately 37.5 lbs).
- Select a mounting location that allows for proper air circulation and is at least 3 feet (0.9 m) away from combustible materials.
- Securely attach the universal bracket to the chosen wall or ceiling studs/joists using appropriate hardware (not included).
- Mount the heater unit onto the bracket. The bracket allows for adjustable positioning to direct heat flow.
4.2 Electrical Connection
WARNING: Ensure power is disconnected at the main circuit breaker before attempting any electrical wiring.
- A dedicated 240V circuit with appropriate amperage (45 Amps for the 10000W model) is required.
- Access the internal wiring compartment of the heater. This typically involves removing a panel on the unit.
- Connect the supply wires to the heater's terminals as indicated in the wiring diagram located inside the heater's wiring compartment and in the full installation guide. Ensure proper grounding.
- Securely close the wiring compartment.
- Once installation is complete, restore power at the circuit breaker.
Image 3: Rear view of the heater, illustrating the fan and the typical location for electrical wiring access.
5. Operating Instructions
The KB ECO2S heater can be operated using the integrated control panel or the included remote control.
5.1 Control Panel Overview
The front panel features a digital display and control buttons for power, mode selection, and temperature adjustment.
Image 4: Detailed view of the heater's control panel with digital display and buttons.
5.2 Remote Control Functions
The remote control provides convenient access to all heater functions from a distance.
- Power On/Off: Press the power button to turn the heater on or off.
- Temperature Adjustment: Use the up/down arrows to set the desired temperature. The digital display will show the set temperature.
- Mode Selection: Cycle through available modes (Heat, Eco, Fan Only, Timer) using the mode button.
- Eco Mode: Automatically adjusts wattage to maintain the set temperature efficiently.
- Fan Only Mode: Operates the fan without engaging the heating elements, useful for air circulation.
- Timer Function: Set a timer for automatic shut-off. Refer to the full manual for detailed timer programming.
5.3 Initial Operation
Upon first use, the heater may emit a slight odor as manufacturing oils burn off. This is normal and will dissipate quickly.
Set the desired temperature. The heater will operate in 2-stage heating, using the lowest wattage necessary to reach and maintain the set temperature, optimizing energy consumption.
Image 5: View of the spiral steel heating elements and fan, designed for efficient heat distribution.
6. Maintenance
WARNING: Disconnect power at the main circuit breaker before performing any maintenance.
- Cleaning: Periodically clean the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Air Intake/Exhaust: Ensure that the air intake and exhaust grilles are free from dust, debris, and obstructions. Use a vacuum cleaner with a brush attachment to gently clean these areas.
- Internal Inspection: For internal cleaning or inspection, it is recommended to contact a qualified service technician.
- Storage: If storing the heater for an extended period, ensure it is clean and dry. Store in a cool, dry place.
7. Troubleshooting
Before contacting customer support, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply; circuit breaker tripped; wiring issue. | Check circuit breaker. Ensure proper electrical connection (consult electrician if unsure). |
| Heater produces insufficient heat. | Incorrect temperature setting; room size exceeds heating capacity; poor insulation. | Increase set temperature. Verify heater wattage is appropriate for the space (refer to specifications). Improve room insulation. |
| Heater cycles on/off frequently (clicking sound). | Thermostat sensitivity; rapid temperature changes. | This can be normal operation as the thermostat maintains temperature. If excessive, ensure proper air circulation around the unit and that the thermostat is not exposed to drafts. If the issue persists, contact customer support. |
| Remote control not working. | Dead batteries; obstruction; out of range. | Replace remote control batteries. Ensure no obstructions between remote and heater. Operate within recommended range. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | KB2410-1-B2-ECO |
| Brand | KING |
| Voltage | 240 Volts |
| Amperage | 45 Amps |
| Wattage | 10000 Watts |
| Heating Coverage | Up to 900 sq ft (based on 8-ft ceiling height and FHA standard insulation values) |
| Product Dimensions (D x W x H) | 13.5" x 15" x 16.5" |
| Item Weight | 37.5 pounds |
| Special Features | Remote Control, Electronic Thermostat, 2-Stage Heating, Eco Mode, Fan Only Mode, Timer |
| Number of Speeds | 2 |
| Fuel Type | Electric |
| Mounting Type | Universal Wall/Ceiling Bracket (included) |
Image 6: Heating coverage chart for various wattage models, including the 10000W model covering up to 900 sq ft.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official KING Electric website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: King Electric
Website: www.king-electric.com
10. Product Videos
KING Electric - Smart Heating Solutions
Video 1: An overview of KING Electric's commitment to smart heating solutions and manufacturing quality.
