Welcome
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Globe Electric 51234 Parker 5-Piece All-in-One Bathroom Set. Please read all instructions carefully before beginning installation.
Important Safety Instructions
- Always turn off the main power supply at the circuit breaker before installing, servicing, or cleaning the fixture.
- Consult a qualified electrician if you are unsure about the installation process.
- Use only the specified bulb type and wattage to avoid overheating.
- Do not connect the fixture to an ungrounded electrical system.
- Keep flammable materials away from the light fixture.
What's Included
Your Globe Electric 51234 Parker 5-Piece Bathroom Set includes the following components:
- 1x 3-Light Vanity Wall Light with Clear Glass Shades
- 1x Towel Bar (20.87" W)
- 1x Towel Ring (6.1" W x 6.88" H)
- 1x Robe Hook (2.2" W at base)
- 1x Toilet Paper Holder (6.69" W)
Image: All components of the Globe Electric Parker 5-Piece Bathroom Set, including the 3-light vanity fixture, towel bar, towel ring, robe hook, and toilet paper holder.
Installation Guide
Before You Begin
Ensure you have the following tools and materials:
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Pliers
- Drill (if needed for anchors)
- Safety Glasses
- Ladder
Step-by-Step Installation
Vanity Light Installation
- Turn off Power: Locate the circuit breaker for the bathroom and turn off the power. Verify power is off using a voltage tester.
- Remove Old Fixture (if applicable): Carefully disconnect and remove any existing light fixture.
- Attach Mounting Plate: Secure the mounting plate to the electrical outlet box using the provided mounting screws. Ensure the plate is level and secure.
- Wire Connections: Connect the fixture's wires to the supply wires from the outlet box. Connect black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Use wire connectors and ensure secure connections.
- Mount Fixture: Carefully push the wired fixture onto the mounting plate and secure it with the provided knob nuts.
- Install Glass Shades: Attach the clear glass shades to each socket.
- Install Bulbs: Screw in three E26/Medium Base 60W bulbs (sold separately).
- Restore Power: Turn the power back on at the circuit breaker.
Image: Detailed view of the Globe Electric Parker 3-light vanity fixture with clear glass shades, highlighting the chrome finish.
Video: Overview of Globe Electric All-In-One Bathroom Sets, demonstrating various styles and ease of installation.
Towel Bar, Towel Ring, Robe Hook, and Toilet Paper Holder Installation
- Positioning: Choose desired locations for each accessory. Use a level to ensure proper alignment.
- Marking: Mark the screw hole positions on the wall using the accessory's mounting bracket as a template.
- Drilling: Drill pilot holes at the marked locations. If installing into drywall, insert wall anchors (not explicitly mentioned as included, but standard practice).
- Attach Brackets: Secure the mounting brackets to the wall using the provided screws.
- Attach Accessories: Place the accessory over its mounting bracket and secure it with the set screws, typically located on the underside.
Image: Close-up view of the matching chrome towel bar, towel ring, and toilet paper holder from the Parker 5-Piece Bathroom Set.
Operating Instructions
The 3-light vanity fixture is designed for standard wall switch operation. If connected to a compatible dimmer switch (sold separately) and used with dimmable E26 bulbs, the light output can be adjusted to create desired ambiance.
Care and Cleaning
- Always ensure the power is off before cleaning the light fixture.
- Wipe the fixture and glass shades with a soft, damp cloth.
- Use mild soap if necessary. Avoid abrasive cleaners, solvents, or polishing agents as they may damage the finish.
- Regularly dust all components to maintain their appearance.
Common Issues
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; loose wiring; faulty bulb. | Check circuit breaker; ensure all wire connections are secure; replace bulb. |
| Light flickers. | Loose bulb; incompatible dimmer switch/bulb; loose wiring. | Tighten bulb; ensure dimmer and bulbs are compatible; check wiring connections. |
| Fixture finish appears dull. | Dust accumulation; use of harsh cleaners. | Clean with a soft, damp cloth and mild soap; avoid abrasive cleaners. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | 51234 |
| Color | Chrome |
| Material | Metal, Glass |
| Light Fixture Form | Vanity |
| Product Dimensions (Vanity) | 7.91"L x 24.61"W x 10.98"H |
| Shade Dimensions | 6.5" W x 5.32" D (each) |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage (Max) | 180 watts (3x 60W E26 bulbs) |
| Bulb Base | E26 |
| Special Feature | Dimmable (with compatible bulbs/switch) |
| Installation Type | Semi Flush Mount |
| Towel Bar Dimensions | 20.87" W x 2.72" D |
| Towel Ring Dimensions | 6.1" W x 6.88" H x 2.72" D |
| Robe Hook Dimensions | 2.2" W at base x 2.2" D |
| Toilet Paper Holder Dimensions | 6.69" W x 2.77" D |
Image: Technical drawing showing the dimensions of the Globe Electric Parker 3-light vanity fixture.
Warranty Information
This Globe Electric product comes with a Limited Warranty. Please refer to the product packaging or contact Globe Electric customer service for specific warranty details and duration.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please visit the official Globe Electric website or contact their customer service department.
Online Support: Visit the Globe Electric Store on Amazon
