Okuma MA-15DXT-T Magda Linecounter Reel User Manual

Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Okuma MA-15DXT-T Magda Linecounter Reel. Adhering to these guidelines will ensure optimal performance and longevity of your fishing reel.

Image: The Okuma MA-15DXT-T Magda Linecounter Reel, showcasing its overall design and features.

Key Features

• Lightweight, corrosion-resistant frame and side plates
• Corrosion-resistant graphite spools
• Mechanical line counter function measures in feet
• Multi-disc Carbonite drag system
• 2 Stainless Steel ball bearings
• 16-point anti-reverse for improved hookups
• Line counter screw port for improved air access
• Durable Machine cut brass gearing
• Self-Lubricating Gear System (all models)
• 15-size features a twin paddle handle configuration
• Automatic trip spool engaging mechanism
• Stainless steel levelwind line guide system

Setup Instructions

1. Mounting the Reel

Securely attach the reel to your fishing rod's reel seat. Ensure the reel foot is firmly seated and the locking mechanism is tightened to prevent movement during use.

2. Spooling Fishing Line

Proper line spooling is crucial for optimal performance. Attach your chosen fishing line to the spool using an arbor knot. Wind the line onto the spool evenly, maintaining moderate tension. Avoid overfilling the spool, leaving a small gap from the spool lip.

3. Line Counter Calibration

The integrated line counter measures line deployment in feet. To ensure accuracy, it is recommended to calibrate the counter with your specific line. Deploy a known length of line (e.g., 100 feet) and compare it to the counter reading. Adjust your fishing technique or note any discrepancies for future reference.

Image: A close-up view of the Okuma Magda Linecounter Reel, highlighting the mechanical line counter display.

Operating the Reel

1. Line Release and Trolling

To release line for trolling, disengage the spool by pressing the thumb bar or lever. The line counter will begin to measure the deployed line. This reel is designed for trolling and does not feature a thumb release for casting like traditional baitcasting reels.

2. Adjusting the Drag System

The multi-disc Carbonite drag system allows for precise control over line tension. Rotate the star drag adjustment knob (located next to the handle) clockwise to increase drag tension and counter-clockwise to decrease it. Adjust the drag according to the fishing conditions and target species to prevent line breakage and ensure smooth line payout during a fight.

Image: Side view of the Okuma Magda Linecounter Reel, illustrating the handle and star drag mechanism.

3. Retrieving Line

To retrieve line, engage the spool by turning the handle forward. The levelwind system will guide the line evenly back onto the spool. The line counter can be reset to zero by pressing the reset button, typically located on the side of the counter unit.

Maintenance

1. Cleaning After Use

After each use, especially in saltwater environments, rinse the reel thoroughly with fresh water. Avoid using high-pressure sprays directly on the reel. Wipe the reel dry with a soft cloth.

2. Lubrication

Periodically apply a small amount of reel oil to moving parts such as the handle knob shafts, levelwind worm gear, and ball bearings. Use reel grease on the main gears and drag washers as needed. Refer to a detailed reel schematic for specific lubrication points if performing a full service.

3. Storage

Store your reel in a dry, cool place away from direct sunlight and extreme temperatures. Loosen the drag completely before storage to prevent compression of the drag washers.

Troubleshooting

Drag System Issues

If the drag feels inconsistent or too tight/loose, ensure the drag star is properly adjusted. If issues persist, the drag washers may require cleaning, re-greasing, or replacement. Consult a qualified technician if you are unsure.

Free Spool Not Functioning

If the spool does not free spool smoothly when disengaged, check for any line caught in the mechanism or debris. Ensure the reel handle is not binding the gears. If the issue continues, internal components may require inspection and service.

Line Counter Inaccuracy

If the line counter provides inaccurate readings, re-calibrate it as described in the Setup section. Ensure the line is spooled correctly and not slipping on the spool. Mechanical issues with the counter may require professional repair.

Specifications

Image: Detailed product specifications table for Okuma Magda Pro Line Counter Reels, including the MA-15DXT-T model.

Warranty Information

The Okuma MA-15DXT-T Magda Linecounter Reel is backed by a 1-year limited warranty. This warranty covers manufacturing defects and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Okuma website.

Customer Support

For further assistance, technical support, or warranty claims, please contact Okuma customer service. Contact information can typically be found on the product packaging or the official Okuma Fishing Tackle Corp. website.