1. Introduction
This manual provides comprehensive instructions for the USARMT XRT122 remote control. Designed for seamless compatibility with various Vizio D-Series and E-Series Smart TVs, this remote offers direct access to essential functions and popular streaming services.
Compatible Vizio TV Models:
- D-Series: D32-D1, D32H-D1, D32X-D1, D39H-D0, D40-D1, D40U-D1, D55U-D1, D58U-D3, D60-D3
- E-Series: E32H-C1, E40-C2, E40X-C2, E43-C2, E48-C2, E50-C1, E55-C1, E65-C3, E65X-C2, E70-C3
The XRT122 remote control is pre-programmed and requires no additional setup for the listed Vizio TV models.
2. Setup and Battery Installation
The USARMT XRT122 remote control operates on two AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Press down on the latch and slide the battery cover downwards to open it.
- Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Note: Always replace both batteries at the same time. Do not mix old and new batteries, or different types of batteries.
Figure 2.1: Battery compartment of the XRT122 remote control with AAA batteries.
This image displays the rear view of the USARMT XRT122 remote control. The battery cover is removed, revealing the compartment designed for two AAA 1.5V batteries. The positive and negative terminals are clearly marked for correct battery insertion.
3. Operating the Remote Control
The USARMT XRT122 remote control is designed for intuitive operation of your Vizio Smart TV. Point the remote directly at your TV's infrared sensor for optimal performance.
Figure 3.1: Front view of the XRT122 remote control with button layout.
This image shows the front face of the USARMT XRT122 remote control. Key buttons are visible, including power, input, navigation pad (up, down, left, right, OK), volume up/down, channel up/down, and dedicated hotkeys for XUMO, Netflix, and iHeartRadio.
3.1 Key Functions
| Button | Function |
|---|---|
| POWER | Turns the TV on or off. |
| INPUT | Cycles through available input sources (HDMI, AV, etc.). |
| XUMO / NETFLIX / iHeartRadio | Direct access hotkeys to launch the respective streaming applications. |
| Navigation Pad (Up/Down/Left/Right) | Navigates menus and selects options. |
| OK | Confirms selections. |
| VOL +/- | Adjusts the volume level. |
| CH +/- | Changes TV channels. |
| MUTE | Mutes or unmutes the TV audio. |
| MENU | Opens the TV's main menu. |
| EXIT | Exits current menu or application. |
| GUIDE | Displays the TV program guide. |
| BACK | Returns to the previous screen or menu. |
| CC | Activates or deactivates Closed Captions. |
| INFO | Displays information about the current program or input. |
| Number Buttons (0-9) | Direct channel selection. |
4. Maintenance
To ensure the longevity and optimal performance of your remote control, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always use new AAA batteries and dispose of old batteries responsibly.
- Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Drops: Protect the remote from physical impact, as drops can damage internal circuitry.
5. Troubleshooting
If you encounter issues with your USARMT XRT122 remote control, refer to the following troubleshooting steps:
- Remote Not Responding:
- Ensure the remote has fresh AAA batteries installed correctly (check polarity).
- Point the remote directly at the TV's infrared sensor.
- Remove any obstructions between the remote and the TV.
- Test the remote by pointing it at a digital camera (like a smartphone camera) and pressing a button. If you see a light flash from the remote's IR emitter on the camera screen, the remote is likely transmitting a signal.
- Specific Buttons Not Working:
- Check for any debris or stickiness around the button.
- If only certain buttons fail, the remote might be damaged.
- TV Not Responding to Hotkeys (XUMO, Netflix, iHeartRadio):
- Ensure your Vizio Smart TV is connected to the internet.
- Verify that the respective applications are installed and updated on your TV.
If these steps do not resolve the issue, contact customer support for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 4330255065 (XRT122) |
| Brand | USARMT |
| Connectivity Technology | Infrared (IR) |
| Compatible Devices | Vizio D-Series and E-Series Smart TVs |
| Power Source | 2 x AAA 1.5V Batteries (not included) |
| Special Feature | Ergonomic design, Pre-programmed, Dedicated app hotkeys (XUMO, Netflix, iHeartRadio) |
| Item Weight | Approximately 1 pound (with packaging) |
7. Warranty Information
This USARMT XRT122 remote control typically comes with a 30-day hassle-free return policy from the date of purchase. For specific warranty details and terms, please refer to the retailer's policy or contact USARMT customer support directly. Keep your proof of purchase for any warranty claims.
8. Customer Support
For further assistance, technical support, or inquiries regarding your USARMT XRT122 remote control, please contact your retailer or the manufacturer. Ensure you have your product model number (XRT122 or 4330255065) and purchase details ready when contacting support.
This manual is subject to change without prior notice.