1.Product Overview
The CAME VER V6000 is a powerful and quiet motorization system designed for both up-and-over and sectional garage doors.This system offers advanced features for enhanced safety and convenience.
Key Features:
- Traction force of 500 N.
- Integrated courtesy light.
- Slowdown function for smooth operation.
- Obstacle detection for enhanced safety.
- Direct display programming on the unit cover.
- 24V DC electronics for precise control.
- Compliance with European Standards EN 12445 and EN 12453 regarding impact forces.
- Automatic stop or reversal upon accidental impact.
Kit Composition:
- V6000 Automation Unit:Includes control panel and encoder for counterbalanced up-and-over doors,spring doors,and sectional doors.
- TOP-432EE Transmitter:A two-channel multi-purpose transmitter operating at 433.92 MHz,featuring 4,096 combinations with self-learning in TOP mode (16,777,216 in TAM mode).
Optional Accessories (Guides):
- V06001 Chain Guide:Length = 3.02 m. Maximum door height:BC = 2.4 m,BM = 2.25 m,STA = 2.1 m,STB = 2.2 m.
- V06002 Chain Guide:Length = 3.52 m. Maximum door height:BM = 2.75 m,STA = 2.6 m,STB = 2.7 m.
- V06003 Chain Guide:Length = 4.02 m. Maximum door height:BM = 3.25 m,STA = 3.1 m,STB = 3.2 m.
Image 1.1:The complete CAME VER V6000 motorization system kit,including the main motor unit,remote control,and packaging.
2.Safety Information
It is crucial to adhere to all safety guidelines to prevent injury or damage.This system complies with European Standards EN 12445 and EN 12453 regarding impact forces.
- Always disconnect power before performing any maintenance or installation.
- Installation and repairs should only be carried out by qualified personnel.
- Keep children and pets away from the garage door area,especially during operation.
- Do not obstruct the path of the garage door while it is in motion.
- The system features obstacle detection,which will stop or reverse the door's movement if an obstruction is detected.However,always exercise caution.
- Regularly check the system for any signs of wear or damage.
3.Setup and Installation
Installation of the CAME VER V6000 system requires careful attention to detail and adherence to local electrical and building codes.It is recommended that installation be performed by a professional.
General Steps:
- Mounting the Motor Unit:Securely attach the V6000 automation unit to the ceiling or appropriate support structure above the garage door,ensuring it is centered with the door's movement.
- Installing the Guide Rail:Assemble and attach the chosen chain guide (V06001,V06002,or V06003) to the motor unit and the garage door.Ensure the chain is properly tensioned.
- Electrical Connections:Connect the motor unit to the main power supply according to the wiring diagram provided in the full installation manual.Ensure all connections are secure and insulated.
- Attaching the Door Arm:Connect the door arm from the guide rail to the garage door.
- Limit Switch Adjustment:Adjust the opening and closing limit switches to define the door's travel range.
- Programming the Transmitter:Program the TOP-432EE transmitter to control the garage door opener.Refer to the "Operating Instructions" section for basic programming details.
Image 3.1:Close-up view of the CAME VER V6000 motor unit,showing its compact design and integrated courtesy light.
4.Operating Instructions
The CAME VER V6000 system is designed for user-friendly operation,primarily via the included remote control.
Using the Remote Control (TOP-432EE):
Image 4.1:The CAME TOP-432EE two-channel remote control for operating the garage door system.
- Press one of the buttons on the TOP-432EE transmitter to initiate the garage door's movement (open or close).
- Pressing the button again during movement will stop the door.
- A subsequent press will reverse the door's direction.
Programming:
The system allows for direct display programming on the unit's cover.For detailed programming steps,including setting limits,force adjustments,and advanced features,please refer to the comprehensive installation manual provided with your product.
Obstacle Detection:
The integrated electronic circuit will automatically stop or reverse the door's movement if an accidental impact or obstruction is detected.This feature enhances safety,but users should still ensure the path is clear.
5.Maintenance
Regular maintenance ensures the longevity and safe operation of your CAME VER V6000 garage door motorization system.
- Monthly Checks:
- Inspect the garage door for proper balance and smooth operation.
- Check all moving parts,including hinges,rollers,and cables,for wear or damage.
- Ensure the chain is properly tensioned and lubricated.
- Test the obstacle detection feature by placing a soft object (e.g.,a cardboard box) in the door's path.The door should stop or reverse.
- Annual Professional Service:It is recommended to have the system inspected and serviced by a qualified technician annually.
- Cleaning:Keep the motor unit and guide rail clean from dust and debris.Use a soft,dry cloth.
- Spare Parts:Information regarding the availability of spare parts for this product is currently unavailable.
6.Troubleshooting
This section provides solutions to common issues you might encounter with your CAME VER V6000 system.
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not move. | No power;Remote control battery low;Safety sensors obstructed. | Check power supply;Replace remote battery;Clear any obstructions from safety sensors. |
| Door reverses unexpectedly. | Obstruction in door path;Force settings too sensitive. | Remove obstruction;Adjust force settings (refer to full manual). |
| Remote control not working. | Battery dead;Not programmed correctly;Out of range. | Replace battery;Reprogram remote (refer to full manual);Move closer to the unit. |
| Motor runs but door doesn't move. | Door disengaged from opener;Chain broken or loose. | Re-engage door;Inspect chain for damage or tension.Contact service if broken. |
If the problem persists after attempting these solutions,please contact a qualified technician or CAME customer support.
7.Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | CAME |
| Model Number | 001U-461XK |
| Item Weight | 4.9 kilograms |
| ASIN | B06VWRS6GT |
| First Available Date | February 17,2017 |
| Traction Force | 500 N |
| Power Supply | 24V DC |
| Remote Frequency | 433.92 MHz |
| Max Door Height (with V06001 guide) | 2.4 m (BC),2.25 m (BM),2.1 m (STA),2.2 m (STB) |
| Max Door Height (with V06002 guide) | 2.75 m (BM),2.6 m (STA),2.7 m (STB) |
| Max Door Height (with V06003 guide) | 3.25 m (BM),3.1 m (STA),3.2 m (STB) |
8.Warranty and Support
For warranty information,please refer to the documentation provided at the time of purchase or contact your retailer.Specific warranty details are not provided in this manual.
Customer Support:
If you require technical assistance,troubleshooting beyond this manual,or information on spare parts,please contact the seller or the manufacturer,CAME.
Seller:BVAnegoce
For further information,you may visit the official CAME website or consult the full product manual.