1. Safety Information
WARNING: This is not a life-saving device. Do not leave children unattended while device is in use. Always ensure adult supervision. This product is intended for adult use. The maximum weight capacity is 1050 pounds.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
2. Package Contents
- Intex Splash 'N Chill Inflatable Island Lounger
- Anchor Bag
- Repair Kit
3. Setup Instructions
3.1. Inflation
Unfold the inflatable island on a clean, flat surface. Locate the Boston valves on the various chambers of the float. Use an air pump (not included) to inflate each chamber until firm to the touch, but not overinflated. Ensure all valves are securely closed after inflation.
Image: The Intex Splash 'N Chill Inflatable Island Lounger during the inflation process.
3.2. Transporting to Water
Due to its large size (145"L x 125"W x 20"H) and weight (39.2 lbs), transporting the inflated island requires multiple individuals. Plan your route to the water carefully to avoid obstacles and potential damage to the float. It is recommended to have a crew to assist with transport.
Video: Demonstrates the size and effort required to transport the inflated island to the water. This video is provided by Spreetail, a seller of the product.
3.3. Anchoring
The included anchor bag can be filled with sand or rocks to prevent the island from drifting. Attach the anchor bag securely to the designated rope attachment points on the float. Ensure the anchor is heavy enough for the water conditions.
Image: A woman holding onto one of the boarding platforms, illustrating the float's design for water access.
4. Operating Instructions
The Intex Splash 'N Chill Island is designed for relaxation on lakes or pools. It can comfortably accommodate up to 7 adults with a maximum weight capacity of 1050 pounds.
4.1. Features
- Seating: Features four upright seats with comfortable backrests and a contoured lounger area for additional relaxation.
- Cooler: A built-in cooler is provided to keep beverages chilled.
- Cup Holders: Six cup holders are integrated into the design for convenience.
- Boarding Platforms: Two inflatable swim-up boarding platforms with grab handles facilitate easy entry and exit from the water.
- Swim-Through Access: The open floor design in the center allows users to dip their feet into the water or swim through.
Image: Several individuals enjoying the Intex Splash 'N Chill Island on a calm lake, showcasing its capacity and design.
Image: A close-up view of the built-in cooler and a cup holder, highlighting these convenient features.
5. Maintenance
5.1. Cleaning
After each use, especially in natural bodies of water, rinse the inflatable island thoroughly with fresh water using a hose. This helps remove sand, dirt, and other debris. Allow the float to air dry completely before deflating and storing.
5.2. Repairs
In the event of a small puncture, use the included repair kit. Follow the instructions provided with the repair kit for proper application. Ensure the area is clean and dry before applying the patch.
6. Storage
To store the inflatable island, first ensure it is completely clean and dry. Open all Boston valves to allow air to escape. Gently press out any remaining air. Fold the deflated island neatly. Storing it in a large, clear bin can help protect it from dust and damage during off-season storage.
7. Troubleshooting
7.1. Drifting
If the island is drifting, ensure the anchor bag is filled with sufficient weight (sand or rocks) and securely attached. Check for strong currents or winds that may require additional anchoring or relocation.
7.2. Minor Damage
For small tears or punctures, utilize the provided repair kit. For larger damage or if the repair kit is insufficient, contact Intex customer support.
7.3. Detached Components
Occasionally, components like side climbing pads or cooler covers may become detached with heavy use. While these may not affect the primary function, they can be reattached or replaced if necessary. Contact customer support for replacement parts.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 56299EP |
| Dimensions (L x W x H) | 145" x 125" x 20" |
| Material | Durable Vinyl (Plastic) |
| Item Weight | 39.2 Pounds |
| Weight Capacity | 1050 Pounds |
| Seating Capacity | Up to 7 Adults |
| Color | Blue/White |
9. Warranty and Support
This product comes with a 90 Day Manufacturer Limited Warranty. For warranty claims, technical support, or replacement parts, please contact Intex customer service. Refer to the product packaging or the official Intex website for the most current contact information.