Pelonis HF-1008B Fan Heater User Manual

Introduction

Welcome to your Pelonis HF-1008B Fan Heater user manual. This manual provides important information for the safe and efficient operation of your new fan heater. Please read it thoroughly before use and keep it for future reference.

Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this heater.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater includes a tip-over safety switch.

Parts Identification

Familiarize yourself with the components of your Pelonis HF-1008B Fan Heater.

Figure 1: Front view of the Pelonis HF-1008B Fan Heater, showing the fan grille and control knobs on top.

Figure 2: The Pelonis HF-1008B Fan Heater placed on a wooden desk in a home office environment, demonstrating its compact size and portability.

• Power/Function Knob: Controls power ON/OFF and selects fan-only or heat settings.
• Thermostat Control Knob: Adjusts the desired temperature.
• Air Outlet Grille: Front grille where heated air is expelled.
• Power Cord: For connecting to an electrical outlet.
• Tip-Over Safety Switch: Located at the bottom, automatically shuts off the heater if it tips over.

Setup and Placement

1. Unpack the heater carefully and remove all packaging materials.
2. Place the heater on a firm, level surface. Ensure it is stable and not prone to tipping.
3. Position the heater at least 3 feet (0.9 meters) away from walls, furniture, curtains, and other combustible materials.
4. Ensure the power cord is not obstructed or placed under rugs.
5. Plug the heater directly into a 120V AC, 60Hz wall outlet. Do not use extension cords or power strips.

Operating Your Fan Heater

Power and Function Settings

The Pelonis HF-1008B features a multi-position power/function knob.

1. OFF (O): Turns the heater off.
2. FAN ONLY (Fan Icon): Activates the fan without heat, providing air circulation.
3. LOW HEAT (I): Provides low heat output.
4. HIGH HEAT (II): Provides high heat output.

Thermostat Control

The thermostat control knob allows you to set your desired room temperature.

1. Turn the Power/Function knob to either LOW HEAT (I) or HIGH HEAT (II).
2. Turn the Thermostat Control knob clockwise to the maximum setting (HI).
3. Once the room reaches your desired temperature, slowly turn the Thermostat Control knob counter-clockwise until you hear a click. The heater will turn off.
4. The heater will now cycle on and off to maintain the set temperature.

Safety Features

• Tip-Over Switch: The heater will automatically shut off if it is accidentally tipped over. To resume operation, place the heater upright on a firm, level surface.
• Overheat Protection: The heater is equipped with an automatic overheat protection device. If the heater overheats, it will automatically shut off. To reset, unplug the heater from the electrical outlet, wait 30 minutes for the unit to cool down, then plug it back in.

Care and Maintenance

Cleaning

Always unplug the heater before cleaning.

• Use a soft, damp cloth to wipe the exterior surfaces of the heater.
• Do not use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface.
• Do not immerse the heater in water.
• Clean the air intake and exhaust grilles regularly with a vacuum cleaner attachment to remove dust and lint.

Storage

When not in use, store the heater in a cool, dry location. It is recommended to store it in its original carton.

Troubleshooting Guide

Product Specifications

• Model: HF-1008B
• Brand: Pelonis
• Heating Method: Forced Air
• Power Source: Corded Electric
• Color: Black
• Special Features: Portable, Adjustable Temperature, Tip-Over Safety Switch, Overheat Protection
• Package Dimensions: 26.67 x 21.84 x 12.7 cm (10.5 x 8.6 x 5 inches)
• Item Weight: 1.31 kg (2.89 lbs)

Warranty and Customer Support

Specific warranty information for the Pelonis HF-1008B Fan Heater is typically provided with the product packaging or on the manufacturer's official website. Please refer to these resources for detailed warranty terms and conditions.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Pelonis customer service. Contact information can usually be found on the product packaging or the official Pelonis website.

Official Product Videos

No official product videos from the seller are available for this model at this time.