WMF Impulse Insulated Jug

Introduction

This instruction manual provides essential information for the safe and effective use of your WMF Impulse Insulated Jug. Designed for maintaining the temperature of both hot and cold beverages, this jug features a high-quality glass insulating core and a secure screw cap. Please read this manual thoroughly before first use and retain it for future reference.

Product Components

• 1 x Insulated Jug (1.0 Litre capacity, 23.4 cm height)
• 1 x Glass Insulating Core (integrated)
• 1 x Screw Cap

Materials: The jug is constructed from 18/10 Cromargan rustproof stainless steel, plastic, and silicone.

Setup

1. Unpacking

Carefully remove all components from the packaging. Inspect the jug and its parts for any signs of damage. Dispose of packaging materials responsibly.

2. Initial Cleaning

Before first use, wash the jug and its screw cap thoroughly by hand with warm water and a mild dish soap. Rinse completely and allow to air dry. Refer to the 'Maintenance and Care' section for detailed cleaning instructions.

Image: Internal structure of the WMF Impulse Insulated Jug, highlighting the glass insert.

Operating Instructions

1. Filling the Jug

Unscrew the cap by turning it counter-clockwise. Pour your desired hot or cold beverage into the jug. Do not overfill; leave a small space at the top to allow for the cap and prevent spills.

2. Sealing the Jug

Place the screw cap onto the jug opening and turn it clockwise until it is securely tightened. The well-closing cap ensures tightness and splash-proof, drip-free pouring.

Image: A hand demonstrating the process of screwing the cap onto the jug.

3. Temperature Retention (ThermaPro Insulation)

The WMF Impulse Insulated Jug features ThermaPro insulation with a superior glass insulating core. This design allows the jug to keep beverages hot for up to 12 hours (maintaining over 70 degrees Celsius) and cold for up to 24 hours, depending on the initial temperature and ambient conditions.

Image: Diagram illustrating the jug's insulation, indicating 24-hour hot and cold retention.

4. Pouring

To pour, simply unscrew the cap. The design of the spout allows for controlled, drip-free pouring.

Safety Precautions:

• Always handle with care when filled with hot liquids to avoid burns.
• Keep out of reach of children when containing hot beverages.
• The glass insert is fragile; avoid dropping or subjecting the jug to strong impacts.

Maintenance and Care

Cleaning Instructions:

• Hand Wash Only: This jug is not dishwasher safe. Washing in a dishwasher may damage the insulation properties and the finish.
• After each use, rinse the interior of the jug with warm water.
• For thorough cleaning, use a bottle brush with warm water and a mild dish soap.
• Rinse thoroughly to remove all soap residue.
• Allow the jug to air dry completely with the cap off to prevent odors and mildew.
• Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.

Storage:

Store the jug in a clean, dry place with the cap slightly ajar to allow for air circulation.

Troubleshooting

Issue: Beverage not staying hot/cold for the stated duration.

• Check Cap Seal: Ensure the screw cap is tightly closed. A loose cap will compromise insulation.
• Pre-heating/Pre-cooling: For optimal performance, pre-heat the jug with hot water or pre-cool with cold water for a few minutes before adding your beverage.
• Fill Level: The jug performs best when filled to near capacity. Partially filled jugs may lose temperature faster.
• Glass Insert Damage: If the jug has been dropped or impacted, the internal glass insert may be damaged, affecting insulation. In such cases, the jug may need replacement.

Issue: Difficulty cleaning the interior.

• The jug's opening is designed for efficient pouring and temperature retention. For cleaning, a bottle brush is recommended to reach the bottom and sides of the interior.

Specifications

Image: Dimensional drawing of the WMF Impulse Insulated Jug.

Warranty and Support

For information regarding warranty coverage, terms, and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For product support, technical assistance, or spare parts, please contact WMF customer service or visit the official WMF website.

No official seller videos were found for this product in the provided data.