SEVERIN Juicer ES 3566 Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and efficient operation, maintenance, and care of your SEVERIN Juicer ES 3566. Please read this manual thoroughly before first use and keep it for future reference. Proper use ensures optimal performance and extends the lifespan of your appliance.

2. Important Safety Instructions

• Always disconnect the appliance from the power supply before assembly, disassembly, or cleaning.
• Do not operate the juicer if the power cord or plug is damaged, or if the appliance malfunctions or has been dropped or damaged in any way.
• Keep hands and utensils out of the feeder chute during operation to prevent injury. Always use the food pusher provided.
• Ensure all parts are correctly assembled and locked before operating the juicer.
• This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not immerse the motor unit in water or any other liquid.
• Do not use the appliance for anything other than its intended purpose.
• Avoid continuous operation for more than 1 minute. Allow the motor to cool down for at least 30 seconds between uses.

3. Product Components

Familiarize yourself with the various parts of your SEVERIN Juicer ES 3566 before assembly and operation.

Figure 3.1: All components of the SEVERIN Juicer ES 3566 laid out. This includes the main motor unit, the transparent lid, the food pusher, the stainless steel filter basket, the juice collection container with foam separator, the pulp collection container, and a cleaning brush.

1. Food Pusher
2. Feeder Chute / Lid
3. Filter Basket (Stainless Steel)
4. Juice Spout with Drip-Stop
5. Motor Unit with Control Dial
6. Pulp Container (1.5 L)
7. Juice Container (500 ml) with Foam Separator Lid
8. Locking Clamp
9. Cleaning Brush

4. Setup and Assembly

Before first use, wash all removable parts (lid, filter basket, juice container, pulp container, food pusher) in warm soapy water, rinse thoroughly, and dry. Ensure the motor unit is unplugged.

1. Place the motor unit on a stable, flat, and dry surface.
2. Insert the pulp container into its designated position on the side of the motor unit.
3. Place the filter basket onto the motor unit, ensuring it is seated firmly.
4. Position the lid over the filter basket and motor unit, aligning the juice spout with the opening.
5. Secure the lid by raising the locking clamp and engaging it into the grooves on the lid. The appliance will not operate unless the clamp is securely locked.
6. Place the juice container under the juice spout.
7. Insert the food pusher into the feeder chute.

Figure 4.1: The SEVERIN Juicer ES 3566 fully assembled and ready for use. A hand is shown inserting a carrot into the wide feeder chute, demonstrating the initial step of the juicing process. Fresh carrots, apples, and grapes are visible around the juicer.

5. Operating Instructions

5.1. Preparing Fruits and Vegetables

• Wash all fruits and vegetables thoroughly.
• Peel fruits with thick or inedible skins (e.g., oranges, pineapples, melons).
• Remove large seeds or pits from fruits (e.g., peaches, plums, cherries).
• Cut larger items into pieces that fit easily into the 6 cm diameter feeder chute.
• For leafy greens, roll them into a tight bundle before inserting.

5.2. Juicing Process

1. Ensure the juicer is correctly assembled and the juice container is in place.
2. Plug the appliance into a suitable power outlet.
3. Turn the control dial to the desired speed setting:
   • Speed 1 (Low): For soft fruits and vegetables (e.g., berries, tomatoes, grapes).
   • Speed 2 (High): For hard fruits and vegetables (e.g., carrots, apples, celery).
4. Gradually feed the prepared ingredients into the feeder chute. Use the food pusher to gently guide them down. Do not force ingredients, as this can damage the motor.
5. The juice will flow into the juice container, and the pulp will collect in the pulp container.
6. When finished, turn the control dial to '0' (Off) and unplug the appliance.

Figure 5.1: Demonstrates the process of adding soft fruits, such as raspberries and orange segments, into the juicer's feeder chute. The food pusher is visible, ready to guide the ingredients.

Figure 5.2: A close-up view of the 500 ml juice container, filled with freshly extracted red juice, possibly from tomatoes. Fresh tomatoes and basil leaves are arranged nearby, indicating the source of the juice.

Figure 5.3: The 1.5 L pulp container being held, showing the accumulated dry, orange pulp, likely from juiced carrots. This illustrates the efficient separation of pulp from juice.

6. Maintenance and Cleaning

Regular cleaning ensures hygiene and prolongs the life of your juicer. Clean the appliance immediately after each use.

1. Unplug the juicer from the power outlet.
2. Disengage the locking clamp and remove the lid.
3. Carefully remove the filter basket and the pulp container.
4. Empty the pulp container and the juice container.
5. Wash the lid, food pusher, filter basket, juice container, and pulp container in warm soapy water. Use the provided cleaning brush to thoroughly clean the fine mesh of the filter basket.
6. Rinse all parts under running water.
7. Wipe the motor unit with a damp cloth. Never immerse the motor unit in water.
8. All removable parts are dishwasher safe, but hand washing is recommended for the filter basket to maintain its sharpness and efficiency.
9. Dry all parts thoroughly before reassembling or storing.

Figure 6.1: The stainless steel filter basket being rinsed under running water. This highlights the importance of cleaning the fine mesh to prevent clogging and ensure efficient juicing.

7. Troubleshooting

8. Technical Specifications

• Model: ES 3566
• Brand: Severin
• Power: 400 Watts
• Voltage: 230V
• Number of Speeds: 2
• Juice Container Capacity: 0.5 Liters (500 ml)
• Pulp Container Capacity: 1.5 Liters
• Material: Stainless Steel / Plastic
• Product Dimensions (Height x Width x Depth): 35 cm x 20 cm x 28 cm (approx. 13.78" x 7.87" x 11.02")
• Item Weight: 2.4 kg (approx. 5.5 pounds)
• Special Features: Removable parts, Drip-free system, Air-cooled motor, Non-slip rubber feet
• Product Care: Removable parts are dishwasher safe (hand wash filter recommended)

9. Warranty and Support

Your SEVERIN Juicer ES 3566 comes with a 2-year manufacturer's warranty, covering defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, spare parts, or warranty service, please contact SEVERIN customer service. Contact details can typically be found on the official SEVERIN website or through your retailer.