User Manual for Cal HT-633M-BK Integrated LED Wall Wash Track Fixture

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Cal AC 40W, 4000K, 2640 Lumen, dimmable Integrated LED Wall wash Track Fixture. Please read this manual thoroughly before installation and retain it for future reference.

Important Safety Information

WARNING:

• Always disconnect power at the circuit breaker before installation or servicing.
• This fixture operates at 120 Volts. Ensure your electrical system is compatible.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
• If you are not familiar with electrical wiring, consult a qualified electrician.
• Do not install this fixture in wet locations.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please check your local laws before purchasing this product.

Product Overview

The Cal HT-633M-BK is an integrated LED wall wash track fixture designed for modern lighting applications. Key features include:

• Durable Metal Construction
• 180 Degree Rotation for flexible light direction
• Flood Light distribution
• 4000K Cool Light Temperature
• Dimmable integrated LED
• Designed for track lighting systems

Image: The Cal HT-633M-BK integrated LED wall wash track fixture, showcasing its black metal construction, rectangular shape, and the array of LED lights with individual reflectors. The fixture is mounted on a track adapter and features a handle for adjustment.

Package Contents

Verify that all components are present and undamaged upon opening the package. If any parts are missing or damaged, do not attempt to install the fixture. Contact customer support for assistance.

• 1 x Cal HT-633M-BK Integrated LED Wall Wash Track Fixture (No Additional Item)

Specifications

Setup and Installation

This fixture is designed for installation on a compatible track lighting system. Professional installation is recommended if you are not experienced with electrical wiring.

Before You Begin:

• Ensure power is OFF at the circuit breaker.
• Confirm you have all necessary tools (e.g., screwdriver, wire strippers, voltage tester).
• Verify the track system is properly installed and grounded.

Installation Steps:

1. Prepare the Fixture: Ensure the fixture's track adapter is in the correct position for insertion into the track.
2. Insert into Track: Align the track adapter with the track slot. Push the fixture firmly into the track until it clicks into place.
3. Secure the Fixture: Depending on your track system, there may be a locking mechanism or screw to secure the fixture. Tighten any securing screws to prevent accidental removal.
4. Adjust Direction: The fixture features 180-degree rotation. Adjust the light direction by gently rotating the fixture body on its axis to achieve the desired wall wash effect.
5. Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
6. Test Operation: Turn on the light switch to confirm the fixture is working correctly.

Note: Specific track system installation procedures may vary. Refer to your track system's manual for detailed instructions on attaching track heads.

Operating Instructions

The Cal HT-633M-BK fixture is designed for simple operation once installed on a compatible track system.

• Turning On/Off: Control the fixture using the wall switch connected to your track lighting system.
• Dimming: This fixture is dimmable. Use a compatible LED dimmer switch (sold separately) connected to your track system to adjust the light intensity. Ensure your dimmer is rated for LED loads.
• Adjusting Light Direction: The fixture can be rotated 180 degrees. Gently pivot the fixture body to direct the light beam as needed for your wall wash application.
• Remote Control: If your track lighting system includes a remote control feature, the fixture may be controlled via that system. Refer to your track system's manual for remote control pairing and operation.

Maintenance

The Cal HT-633M-BK LED fixture requires minimal maintenance due to its integrated LED design.

• Cleaning: To clean the fixture, ensure power is off. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or LED components.
• LED Replacement: The LEDs in this fixture are integrated and not user-replaceable. If the LEDs fail, the entire fixture typically needs to be replaced.
• Inspection: Periodically inspect the fixture and its connections for any signs of damage or loose wiring. If any issues are found, disconnect power and consult a qualified electrician.

Troubleshooting

If troubleshooting steps do not resolve the issue, contact customer support or a qualified electrician.

Warranty and Support

This Cal HT-633M-BK fixture comes with a manufacturer's warranty. The warranty period is 1 year from the date of purchase.

For warranty claims, technical support, or replacement parts, please contact Cal Lighting customer service. Keep your proof of purchase for warranty validation.

Contact information for Cal Lighting can typically be found on their official website or on the product packaging.