Wright Products WC13 Heavy Duty Residential Door Closer User Manual

1. Product Overview

The Wright Products WC13 is a heavy-duty residential door closer engineered for exterior applications. It features a robust design, combining functionality with a clean aesthetic. This closer is a size 3 unit, suitable for interior doors 34 to 38 inches wide and exterior doors 24 to 30 inches wide. It offers a 155-degree opening range and can be installed in either standard or top jamb mount configurations. The WC13 is UL listed, ensuring compliance with safety and performance standards.

Key features include:

• Size 3 closer for heavy-duty residential use.
• UL listed for safety and performance.
• Adjustable closing and latching speed for customized door control.
• Versatile installation: Standard or top jamb mounting applications.
• Recommended for interior doors 34" to 38" wide and exterior doors 24" to 30" wide.

Image 1.1: Wright Products WC13 Heavy Duty Residential Door Closer, shown in its retail packaging.

2. Important Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in injury or property damage.

• Always wear appropriate personal protective equipment, such as safety glasses, during installation.
• Ensure all mounting screws are securely fastened to prevent the closer from detaching.
• Use only the tools specified in the installation section.
• Do not attempt to disassemble the closer unit, as it contains pressurized components.
• Keep children and pets away from the door during installation and adjustment.
• If you are unsure about any part of the installation process, consult a qualified professional.

3. Package Contents

Verify that all components are present before beginning installation:

• 1x Wright Products WC13 Door Closer Body
• 1x Main Arm Assembly
• 1x Parallel Arm Bracket (if applicable for parallel arm mounting)
• 1x Set of Mounting Screws
• 1x Instruction Template (paper manual)

4. Installation Instructions

This section provides general installation guidelines. Always refer to the detailed template and instructions included in your product packaging for precise measurements and diagrams specific to your mounting type.

4.1 Tools Required

• Drill
• Drill bits (appropriate size for pilot holes)
• Screwdriver (Phillips head recommended)
• Measuring tape
• Pencil
• Level

4.2 Mounting Options

The WC13 closer supports two primary mounting configurations:

• Standard Mount (Pull Side): The closer body is mounted on the door frame on the pull side of the door. The arm extends from the closer to the door.
• Top Jamb Mount (Push Side): The closer body is mounted on the top jamb of the door frame on the push side of the door. The arm extends from the closer to the door.

4.3 Step-by-Step Installation (Standard Mount Example)

1. Prepare the Door and Frame: Ensure the door and frame are clean and free of obstructions.
2. Position the Template: Tape the provided paper template to the door and frame according to your desired mounting type (e.g., standard mount for pull side). Use a level to ensure it is straight.
3. Mark Drill Holes: Using a pencil, mark the center of all screw holes indicated on the template for both the closer body and the arm shoe.
4. Drill Pilot Holes: Carefully drill pilot holes at each marked location. Ensure the drill bit size matches the recommendation in the template to prevent stripping or splitting.
5. Mount the Closer Body: Align the closer body with the drilled holes on the door frame. Secure it using the provided mounting screws. Do not overtighten.
6. Attach the Main Arm: Attach the main arm to the closer spindle. The arm typically has a square or splined hole that fits onto the spindle. Secure it with the provided screw or nut.
7. Attach the Arm Shoe: Attach the arm shoe (the end of the arm that connects to the door) to the drilled holes on the door. Secure it with the provided screws.
8. Connect the Arm: Connect the two sections of the arm (main arm and forearm) using the connecting screw or pin. Ensure the arm is properly aligned and allows for full door swing.
9. Initial Adjustment: Perform an initial adjustment of the arm length to ensure the door closes smoothly without excessive force or slamming. Refer to the 'Operation and Adjustment' section for detailed instructions.

5. Operation and Adjustment

The WC13 door closer features two adjustment valves to control the closing and latching speeds of the door. These valves are typically located on the end of the closer body.

5.1 Adjusting Closing Speed

The closing speed controls how quickly the door moves from its fully open position until it is approximately 10-15 degrees from closing. To adjust:

• Locate the closing speed adjustment valve (often labeled '1' or 'C').
• Turn the valve clockwise to decrease the closing speed (slower).
• Turn the valve counter-clockwise to increase the closing speed (faster).
• Make small adjustments (quarter turns) and test the door's closing action after each adjustment.

5.2 Adjusting Latching Speed

The latching speed controls how quickly the door moves in the final 10-15 degrees of its closing cycle, ensuring it latches securely without slamming. To adjust:

• Locate the latching speed adjustment valve (often labeled '2' or 'L').
• Turn the valve clockwise to decrease the latching speed (slower, softer latch).
• Turn the valve counter-clockwise to increase the latching speed (faster, firmer latch).
• Make small adjustments and test the door's latching action. The goal is a firm latch without excessive force.

Important: Do not turn adjustment valves more than two full turns from their factory-set position, as this may cause internal damage or fluid leakage.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your door closer.

• Periodic Inspection: Annually inspect all mounting screws to ensure they are tight. Retighten if necessary.
• Cleanliness: Keep the closer body and arm free of dirt and debris. Wipe with a damp cloth as needed. Avoid using harsh chemicals or abrasive cleaners.
• Lubrication: The internal components of the closer are factory-lubricated and sealed. No additional lubrication is required.
• Arm Assembly: Check the arm assembly for any signs of wear or damage. Ensure all pivot points move freely.

7. Troubleshooting Guide

8. Specifications

9. Warranty and Support

Wright Products offers a limited warranty on the WC13 Heavy Duty Residential Door Closer. Please refer to the warranty information included with your product packaging for specific terms and conditions.

For technical assistance, troubleshooting beyond this guide, or warranty claims, please contact Wright Products customer support:

• Website: www.wrightproducts.com (Please note: This is a placeholder URL. Refer to your product's official documentation for the correct website.)
• Phone: Refer to your product's official documentation for customer service phone numbers.

When contacting support, please have your product model number (WC13) and purchase date available.