Introduction
Thank you for choosing the Vivitar 110EF Pocket Camera. This compact and easy-to-use camera is designed for capturing everyday moments with simplicity. Featuring a focus-free lens and a built-in electronic flash, it is ideal for various lighting conditions. Please read this manual carefully to ensure proper operation and care of your camera.
Setup
1. Inserting Batteries
The Vivitar 110EF requires two (2) AA alkaline batteries (not included) for operation, primarily for the electronic flash. Ensure batteries are inserted with correct polarity (+/-) as indicated inside the battery compartment.
Image: The Vivitar 110EF Pocket Camera in its original blister packaging. The packaging highlights key features such as 'Focus Free', 'Electronic Flash', 'Uses 110 cartridge film', and 'Uses 2 AA alkaline batteries (not included)'. The camera itself is visible through the clear plastic, showcasing its compact, black design.
2. Loading 110 Cartridge Film
Open the film compartment door, typically located on the back or side of the camera. Insert a 110 cartridge film into the compartment, ensuring it is seated correctly. Close the film compartment door securely. The camera is now ready for use.
Operating
1. Taking Photographs
Point the camera at your subject. Since the camera is Focus Free, there is no need to adjust focus. Press the shutter button firmly to take a picture. Advance the film after each shot, usually by turning a thumb wheel or lever, to prepare for the next exposure.
2. Using the Electronic Flash
The Vivitar 110EF features a built-in Electronic Flash for low-light conditions. To activate the flash, slide the flash switch or button to the 'ON' position. Wait for the flash ready light (if present) to illuminate, indicating the flash is charged and ready to fire. For best results, ensure your subject is within the effective range of the flash.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera body. For the lens, use a specialized lens cleaning cloth and solution. Avoid abrasive materials or harsh chemicals.
- Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if the camera will not be used for an extended period to prevent leakage.
- Film Handling: Always load and unload film in subdued light to prevent accidental exposure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash not firing | Low or dead batteries; Flash not charged; Flash switch off. | Replace batteries; Wait for flash ready light; Turn flash switch on. |
| Film not advancing | Film improperly loaded; Film jammed; End of film roll. | Re-load film correctly; Gently check for obstructions; Replace with new film cartridge. |
| Pictures are blurry | Camera movement during exposure; Subject too close/far for fixed focus. | Hold camera steady; Ensure subject is within optimal fixed-focus range (typically 4 feet to infinity). |
Specifications
- Model: 110EF (063120-W)
- Film Type: 110 Cartridge Film
- Lens: Focus Free
- Flash: Electronic Flash (Built-in)
- Batteries: 2 x AA Alkaline (not included)
- Dimensions (Package): 9.2 x 4.9 x 3.9 inches
- Weight (Item): 15.2 ounces
- UPC: 019643631205
- Manufacturer: Vivitar Corporation
Warranty and Support
The Vivitar 110EF Pocket Camera comes with a One Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support or warranty service, please contact Vivitar Corporation directly. Contact information can typically be found on the manufacturer's official website or product packaging. When contacting support, please have your model number (110EF) and UPC (019643631205) available.