EV Rider Transport AF+ Automatic Folding Scooter User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your EV Rider Transport AF+ Automatic Folding Scooter. Please read this manual thoroughly before using the scooter to ensure proper understanding and to prevent injury or damage.

The EV Rider Transport AF+ is a lightweight, automatic folding mobility scooter designed for portability and ease of use, featuring remote-controlled folding and unfolding, a lithium battery, and a compact design suitable for travel.

2. Safety Information

WARNING: This product can expose you to chemicals including lead and lead components, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, refer to www.p65warnings.ca.gov.

General Safety Guidelines:

• Always operate the scooter on stable, level surfaces. Avoid steep inclines, uneven terrain, or soft ground.
• Ensure the scooter is fully unfolded and locked into position before use.
• Do not exceed the maximum weight capacity of 250 lbs (113 kg).
• Keep hands and feet clear of moving parts, especially during folding and unfolding.
• Always use the key ignition to turn the scooter on and off.
• Exercise caution when operating in crowded areas or near obstacles.
• Do not operate the scooter under the influence of alcohol or medication that may impair your ability to drive safely.
• Regularly inspect tires, brakes, and battery for wear or damage.
• For air travel, the lithium battery must be removed and carried separately according to airline regulations. Consult your airline prior to travel.

3. Product Overview

The EV Rider Transport AF+ scooter features a compact design with an adjustable tiller, LED headlight, and dual hand two-way throttle control. It is equipped with a dual front wheel design for enhanced stability.

Figure 1: The EV Rider Transport AF+ Automatic Folding Scooter in its unfolded, operational state. This image shows the burgundy red scooter with its seat, tiller, and wheels ready for use.

Figure 2: A close-up view of the scooter's tiller control panel, displaying the key ignition, speed adjustment dial, battery indicator, and throttle levers.

4. Setup

4.1 Unpacking

1. Carefully remove the scooter and all accessories from the packaging.
2. Inspect the scooter for any signs of damage that may have occurred during shipping. Contact your dealer immediately if damage is found.
3. Retain all packaging materials for future transport or storage.

4.2 Battery Charging

The scooter is powered by an 11.5 Ah Lithium battery. Before initial use, fully charge the battery.

Figure 3: The battery charger for the EV Rider Transport AF+ scooter, including the power cord and charging connector.

• Locate the charging port on the scooter.
• Connect the charger to the charging port and then plug the charger into a standard wall outlet.
• The indicator light on the charger will show the charging status (typically red for charging, green for fully charged).
• Allow 8-12 hours for a full charge. Do not overcharge the battery.

4.3 Initial Unfolding

The scooter can be unfolded automatically using the remote control.

Figure 4: The EV Rider Transport AF+ scooter in its folded state, alongside the remote control and ignition keys. The remote is used for automatic folding and unfolding.

1. Place the folded scooter on a flat, stable surface.
2. Press the 'Unfold' button on the remote control.
3. The scooter will automatically unfold. Ensure all parts are securely locked into place before use.

5. Operating Instructions

5.1 Controls

• Key Ignition: Insert the key and turn to the 'ON' position to power on the scooter.
• Throttle Control: Use the dual hand two-way throttle levers on the tiller to move forward or backward. Push the right lever for forward motion, and the left lever for reverse.
• Speed Adjustment: A dial on the tiller allows you to adjust the maximum speed of the scooter.
• LED Headlight: The scooter is equipped with an LED headlight for visibility.
• Adjustable Tiller: The tiller height can be adjusted for user comfort.

5.2 Driving

1. Ensure the battery is fully charged and the scooter is fully unfolded and locked.
2. Turn the key to the 'ON' position.
3. Adjust the speed dial to a comfortable setting.
4. Gently press the throttle lever to begin moving. Release the lever to stop.
5. Steer by turning the tiller handlebars. The scooter has an ultra-tight turning radius of 31 inches.

5.3 Automatic Folding

To fold the scooter for transport or storage:

1. Ensure the scooter is turned off and on a flat surface.
2. Clear any objects from the folding path.
3. Press the 'Fold' button on the remote control.
4. The scooter will automatically fold into a compact unit.

5.4 Travel Considerations

The EV Rider Transport AF+ is FAA approved for safe air travel. However, specific airline regulations regarding lithium batteries vary. Always contact your airline in advance to confirm their requirements for transporting mobility scooters and their batteries.

6. Maintenance

6.1 Battery Care

• Charge the battery regularly, even if the scooter is not in frequent use, to maintain battery health.
• Avoid completely draining the battery before recharging.
• Store the scooter and battery in a cool, dry place.

6.2 Cleaning

• Wipe down the scooter with a damp cloth. Do not use abrasive cleaners or spray water directly onto electrical components.
• Keep the wheels and chassis free of debris.

6.3 Storage

When storing the scooter for extended periods, ensure the battery is fully charged and disconnect it if possible. Store in a dry, protected area.

7. Troubleshooting

• Scooter not turning on: Check if the key is fully inserted and turned to 'ON'. Ensure the battery is charged and properly connected.
• Scooter not moving: Verify the throttle levers are engaged correctly. Check for any obstructions to the wheels. Ensure the speed dial is not set to minimum.
• Scooter not folding/unfolding: Ensure the battery has sufficient charge. Check for any obstructions preventing the mechanism from operating.
• Reduced range or power: This may indicate a low battery charge or an aging battery. Ensure the battery is fully charged before each use.

For issues not resolved by these steps, please contact customer support.

8. Specifications

9. Support

For further assistance, technical support, or warranty inquiries, please contact your authorized EV Rider dealer or visit the official EV Rider website.