Introduction
The Triangle Voce Esprit EZ is a high-performance center channel loudspeaker designed to deliver clear, detailed dialogue and balanced sound in a home cinema system. Featuring a titanium horn tweeter and dual 5-inch cellulose paper midrange drivers, this speaker is engineered for acoustic accuracy and seamless integration with other Esprit EZ series speakers. Its bass-reflex design ensures robust audio performance for an immersive listening experience.
Safety Instructions
- Placement: Ensure the speaker is placed on a stable, level surface or stand to prevent accidental falls.
- Ventilation: Do not block any ventilation openings. Allow adequate space around the speaker for proper airflow.
- Moisture: Keep the speaker away from water, moisture, and high humidity environments. Do not expose it to dripping or splashing liquids.
- Heat: Avoid placing the speaker near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
- Power: Connect the speaker only to an amplifier or receiver with appropriate power output and impedance ratings. Exceeding recommended power can damage the speaker.
- Cleaning: Disconnect the speaker from the amplifier before cleaning. Use only a dry cloth.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Package Contents
Please check that the following items are included in your package:
- Triangle Voce Esprit EZ Center Channel Speaker
- Magnetic Grille
- User Manual (this document)
Setup
1. Placement
The center channel speaker is crucial for dialogue clarity in a home theater system. Optimal placement is directly above or below your television or projection screen, centered horizontally. Ideally, the tweeter should be as close to ear level as possible when seated in your primary listening position. Ensure the speaker is placed on a stable surface or a dedicated speaker stand, and avoid obstructing the front-firing bass ports.
Image: Front view of the Triangle Voce Esprit EZ Center Channel Speaker with its magnetic grille attached.
2. Connections
To connect your Voce Esprit EZ speaker to your AV receiver or amplifier, use high-quality speaker wire. Observe correct polarity: connect the positive (+) terminal on the speaker (usually red) to the positive (+) terminal on your amplifier, and the negative (-) terminal on the speaker (usually black) to the negative (-) terminal on your amplifier. Incorrect polarity can result in poor sound quality and reduced bass response.
Image: Rear view of the Triangle Voce Esprit EZ Center Channel Speaker, highlighting the speaker wire binding posts for connection.
Ensure all connections are secure to prevent signal loss or short circuits. After connecting, configure your AV receiver's speaker settings to recognize the center channel speaker and set appropriate crossover frequencies as recommended by your receiver's manual or an auto-calibration system.
Operating
Once connected and configured, the Triangle Voce Esprit EZ speaker operates as part of your home theater system. It will reproduce the center channel audio, primarily dialogue, from your source material. For optimal performance, allow a 'break-in' period of approximately 20-50 hours of normal use. During this time, the speaker drivers will loosen up, and the sound quality may improve.
Image: Front view of the Triangle Voce Esprit EZ Center Channel Speaker with the magnetic grille removed, revealing the titanium horn tweeter and dual 5-inch midrange drivers.
Adjust the volume through your AV receiver. Avoid excessively high volume levels that cause audible distortion, as this can damage the speaker drivers.
Maintenance
- Cleaning the Cabinet: Use a soft, dry, lint-free cloth to wipe the speaker cabinet. Do not use liquid cleaners, aerosol sprays, or abrasive chemicals, as these can damage the finish.
- Cleaning the Grille: The magnetic grille can be gently removed and dusted with a soft brush or a vacuum cleaner on a low setting.
- Driver Care: Avoid touching the speaker drivers (tweeter and woofers) directly, as this can cause damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from center speaker | Loose speaker wire connection; Receiver not configured for center channel; Receiver input error. | Check speaker wire connections at both the speaker and receiver. Ensure correct polarity. Verify receiver settings for center channel output. Select correct audio input on receiver. |
| Distorted or unclear dialogue | Incorrect speaker placement; Overdriven amplifier; Incorrect receiver settings (e.g., crossover). | Adjust speaker placement for optimal sound. Reduce volume. Check receiver's speaker calibration and crossover settings. Ensure speaker wires are not frayed or shorting. |
| Dialogue sounds too quiet or too loud | Center channel level imbalance in receiver settings. | Adjust the center channel level in your AV receiver's speaker setup menu. Run auto-calibration if available. |
Specifications
| Brand | Triangle |
| Model Name | Voce Esprit EZ |
| Model Number | Heyda EZ |
| Speaker Type | Center Channel Loudspeaker |
| Drivers | 1 x Titanium Horn Tweeter, 2 x 5" Cellulose Paper Midrange Drivers |
| Maximum Power Handling | 160 Watts |
| Connectivity | Speaker Wire Binding Posts |
| Design | Bass-reflex, Front-firing ports |
| Color | Black Ash |
| Item Weight | 9.3 Kilograms |
| Dimensions (Approximate Length) | 510 Millimeters |
| Water Resistance Level | Not Water Resistant |
Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Triangle website. You may also contact your authorized Triangle dealer for assistance.
