Introduction
Welcome to your SKMEI 1061 Multi-Functional Sports Watch. This manual provides comprehensive instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your watch. Please read this manual carefully before using your watch.
The SKMEI 1061 watch combines a classic analog pointer display with a modern LED digital display, offering multiple functions including time, date, day of week, alarm, chronograph (stopwatch), and dual time. It is designed with 50-meter water resistance and an EL backlight for visibility in low-light conditions.
Image: An overview of the SKMEI 1061 watch highlighting its key features such as double time, chronograph, alarm, date, 50M water resistance, and EL light.
Initial Setup
Your watch comes with a pre-installed battery. Before first use, ensure any protective films are removed from the watch face and back. The watch is ready for time and function setting.
Button Identification
The SKMEI 1061 watch features four primary buttons for operation:
- LIGHT (Top Left): Activates the EL backlight for illumination.
- MODE (Bottom Left): Cycles through different operational modes (Normal Time, Chronograph, Alarm, Dual Time).
- START (Top Right): Used to start/stop functions in chronograph mode and adjust values in setting modes.
- RESET (Bottom Right): Used to reset functions in chronograph mode and select items or confirm settings in setting modes.
Image: A detailed diagram illustrating the button layout and various display elements of the SKMEI 1061 watch. It shows the positions of the LIGHT, MODE, START, and RESET buttons, along with indicators for date, minutes, hours, and the backlight button.
Operating Instructions
Setting Time and Date
- From the normal time display, press the MODE button three times to enter time setting mode. The seconds digits will flash.
- Press the RESET button to cycle through the setting items: Seconds → Hour → Minute → Month → Date → Day of Week.
- Use the START button to adjust the flashing value for each item.
- Once all settings are correct, press the MODE button to return to the normal time display.
Using the Chronograph (Stopwatch)
- From the normal time display, press the MODE button once to enter Chronograph mode. The display will show "00:00:00".
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to clear the stopwatch to "00:00:00".
- To exit Chronograph mode, press the MODE button.
Setting the Alarm
- From the normal time display, press the MODE button twice to enter Alarm setting mode. The hour digits will flash.
- Press the RESET button to switch between setting the hour and minute.
- Use the START button to adjust the flashing value.
- To activate/deactivate the alarm, press the START and RESET buttons simultaneously while in alarm mode. An alarm icon will appear or disappear on the display.
- Press the MODE button to exit Alarm setting mode.
Dual Time Function
- From the normal time display, press the MODE button four times to enter Dual Time setting mode. The hour digits will flash.
- Press the RESET button to switch between setting the hour and minute for the second time zone.
- Use the START button to adjust the flashing value.
- Press the MODE button to exit Dual Time setting mode.
EL Backlight
Press the LIGHT button (top left) to illuminate the display for a few seconds, allowing clear visibility in low-light conditions.
Image: The SKMEI 1061 watch displaying its EL backlight feature, showing the digital time clearly illuminated in a dark setting for enhanced readability.
Water Resistance (50M)
The SKMEI 1061 watch is rated for 50 meters (5ATM) water resistance. This means it is suitable for daily use, including washing hands, exposure to rain, and showering. It is also suitable for swimming in shallow water.
Important: Do not press any buttons while the watch is submerged in water, as this can compromise the water resistance seals and lead to internal damage.
Image: Illustrations demonstrating the 50-meter water resistance of the SKMEI 1061 watch, showing its suitability for activities like washing hands, use in rain/shower, and swimming. A warning against pressing buttons underwater is also depicted.
Care and Maintenance
- Cleaning: Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
- Avoid Chemicals: Do not expose the watch to strong chemicals, solvents, or detergents, as these can damage the case, strap, or seals.
- Temperature Extremes: Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods, as this can affect battery life and watch components.
- Impact: While the watch is designed to be shock-resistant, avoid unnecessary impacts or drops to prevent potential damage.
- Battery Replacement: When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have this done by a qualified watch technician to ensure water resistance is maintained.
Troubleshooting
- Display is blank or dim:
- The battery may be low or depleted. Replace the battery.
- Time is incorrect:
- Re-set the time following the "Setting Time and Date" instructions. Ensure you are not in a setting mode when expecting normal time display.
- Water appears inside the watch:
- Immediately take the watch to a professional for inspection. This indicates a breach in the water resistance, possibly due to impact or pressing buttons underwater.
- Buttons are unresponsive:
- Check if the watch is in a specific mode that locks button functions. If the issue persists, the battery might be low, or there could be an internal malfunction.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | SKMEI 1061 |
| Display Type | LED Digital and Analog Pointer |
| Movement | Japanese Quartz |
| Water Resistance | 50M (5ATM) |
| Case Material | ABS Plastic |
| Strap Material | PU Resin |
| Backlight | EL Light |
| Functions | Time, Date, Day, Alarm, Chronograph, Dual Time |
| Package Dimensions | 18.03 x 9.65 x 5.33 cm |
| Item Weight | 45.35 g |
Image: Diagram showing the dimensions of the SKMEI 1061 watch, including case width (43mm), height (47mm), and strap circumference (maximum 16cm, minimum 12cm).
Image: Detailed view of the SKMEI 1061 watch highlighting its construction: Japanese movement, shock-resistant ABS plastic case, highly transparent resin glass, 50M water-resistant stainless steel screw back, stainless steel buckle, and Germany imported PU resin strap.
Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer directly.
For technical support, troubleshooting assistance, or any further inquiries regarding your SKMEI 1061 watch, please contact SKMEI customer service or your authorized dealer.
