1. Product Overview
The MISTRAL CUT MOVE.006 is a professional cordless hair clipper designed for efficient and precise hair trimming. It features an 8-hour battery autonomy and a super silent comb system for a comfortable user experience. This device is suitable for various grooming needs, including beard, mustache, nose, ear, and body hair trimming, as well as dry shaving.
2. Important Safety Information
Please read all safety instructions carefully before using the appliance.
- Do not use the clipper on eyes, sensitive skin areas, or other delicate body parts.
- Keep the appliance out of reach of children.
- Do not immerse the clipper or charger in water or other liquids. Keep away from water sources.
- Store the appliance in a dry place when not in use.
- Always follow the recommended cleaning and maintenance instructions to ensure safe operation and longevity of the device.
- Ensure the appliance is fully charged before initial use.
3. Package Contents
Verify that all items are present in the package:
- MISTRAL CUT MOVE.006 Hair Clipper
- Charging Cable / Power Adapter
- Comb Guides (3mm, 6mm, 9mm)
- Cleaning Brush
- Lubricating Oil
Image 1: Contents of the MISTRAL CUT MOVE.006 package, including the clipper, charger, three comb guides, a small cleaning brush, and a bottle of lubricating oil.
4. Setup
4.1. Charging the Device
Before first use, fully discharge the battery, then charge it completely.
- Ensure the clipper is switched off.
- Connect the charging cable to the clipper's charging port.
- Plug the power adapter into a suitable electrical outlet (100-240V, 50/60Hz).
- The charging indicator light will illuminate. A full charge takes approximately 8 hours.
- Once fully charged, disconnect the charger from the outlet and the clipper.
4.2. Attaching Comb Guides
Select the desired comb guide for your preferred hair length.
- Ensure the clipper is switched off.
- Align the comb guide with the clipper blade.
- Gently push the comb guide onto the blade until it clicks securely into place.
- To remove, gently pull the comb guide away from the blade.
5. Operating Instructions
5.1. General Use
- Ensure the clipper is fully charged. The working time on a full charge is approximately 80 minutes.
- Attach the desired comb guide (3mm, 6mm, or 9mm) if you wish to trim hair to a specific length. For a very close cut (0.1-0.3mm), use without a comb guide.
- Switch on the clipper using the power button.
- Hold the clipper with the blade flat against the skin and move it slowly against the direction of hair growth.
- After use, switch off the clipper.
5.2. Hair Length Adjustment
The MISTRAL CUT MOVE.006 comes with three comb guides to achieve different hair lengths:
- 3mm Comb Guide: For short trims.
- 6mm Comb Guide: For medium-short trims.
- 9mm Comb Guide: For longer trims.
For a very close cut, ranging from 0.1mm to 0.3mm, operate the clipper without any comb guide attached.
6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your clipper.
6.1. Cleaning the Blades
- Ensure the clipper is switched off and disconnected from the power source.
- Remove any attached comb guides.
- Use the provided cleaning brush to remove loose hairs from the blades and the clipper head.
- For thorough cleaning, the blade set can be carefully detached (refer to specific instructions if provided in a physical manual, otherwise proceed with caution).
- Do not rinse the clipper under water unless explicitly stated as waterproof.
6.2. Lubrication
After every few uses, or if the blades feel sluggish, apply a small amount of the provided lubricating oil to the blades.
- Ensure the clipper is clean and dry.
- Apply 1-2 drops of lubricating oil evenly across the blade teeth.
- Switch on the clipper for a few seconds to distribute the oil.
- Wipe off any excess oil with a soft cloth.
6.3. Storage
Store the clipper in a dry, cool place, away from direct sunlight and moisture. Keep it out of reach of children.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on. | Battery is discharged. | Charge the clipper for 8 hours. |
| Clipper runs slowly or pulls hair. | Blades are dirty or not lubricated. | Clean the blades and apply lubricating oil. |
| Clipper makes unusual noise. | Blades may be misaligned or dirty. | Clean and lubricate blades. If issue persists, contact support. |
| Battery life is shorter than expected. | Battery not fully charged or aging battery. | Ensure full 8-hour charge. If battery is old, consider replacement if available. |
8. Technical Specifications
- Model: MOVE.006
- Brand: MISTRAL
- Dimensions: 143.7 x 34.5 mm
- Voltage: 100-240V, 50/60 Hz
- Output Voltage: 5V / 600 mA
- Battery: 2000mAh / Ni-Mh / 2.4V
- Power: 5W
- Charge Time: 8 hours
- Working Time: 80 minutes
- Blade Material: Stainless Iron
- Haircutting Length: 0.1-0.3 mm (without comb guide)
- Power Source: Battery Powered (Cordless)
- Special Feature: Super Silent Comb System
- Recommended Uses: Beard trimming, mustache trimming, nose and ear hair trimming, body hair trimming, dry shaving.
- Included Accessories: 3mm, 6mm, 9mm comb guides, cleaning brush, lubricating oil.
Image 2: Back of the MISTRAL CUT MOVE.006 product box, displaying detailed technical specifications and features in multiple languages.
9. Warranty and Support
For information regarding warranty coverage, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please reach out to the manufacturer, MISTRAL, through their official support channels.
