Introduction
The BRITA S1200 Active Water Filter Bottle is designed to provide filtered water on the go, supporting an active and healthy lifestyle. It features activated natural carbon from coconut shells to reduce chlorine, impurities, and microparticles, while preserving valuable minerals. The bottle has a shock-resistant, squeezable body, a practical carry strap, and a sports mouthpiece for convenient hydration.
This manual provides essential information for the proper use and maintenance of your BRITA S1200 Active Water Filter Bottle.
Product Components
- BRITA S1200 Active Water Filter Bottle (600ml capacity)
- Filter Disc (MicroDisc)
- Sports Mouthpiece
- Removable Lid with Carry Loop
Image: The BRITA S1200 Active Water Filter Bottle disassembled, showing the bottle, filter disc, and lid with mouthpiece.
Setup Instructions
- Unpack: Carefully remove all components from the packaging.
- Wash: Before first use, wash the bottle, lid, and mouthpiece by hand or in a dishwasher (top rack only). Do not wash the filter disc.
- Prepare Filter Disc: Remove the BRITA MicroDisc from its packaging. Rinse it under running water for approximately 30 seconds to remove any loose carbon particles.
- Insert Filter Disc: Unscrew the top lid of the bottle. Locate the filter holder inside the lid. Place the MicroDisc into the filter holder, ensuring it sits flat and securely.
- Assemble: Screw the top lid back onto the bottle until it is firmly closed.
- First Fill: Fill the bottle with tap water. Squeeze the bottle to allow water to pass through the filter. Discard the first two fillings to prime the filter.
Image: A close-up of the BRITA S1200 Active Water Filter Bottle showing the filter disc inserted into the lid.
Operating Instructions
- Fill: Unscrew the top lid and fill the bottle with cold tap water. Do not overfill.
- Close: Securely screw the lid back onto the bottle.
- Drink: Pull up the sports mouthpiece to open. Squeeze the bottle gently to drink filtered water. Push the mouthpiece down to close and prevent leaks.
- Refill: Refill the bottle as needed. The filter disc will continue to filter water as you drink.
Image: The BRITA S1200 Active Water Filter Bottle being held, ready for use.
Maintenance
Cleaning the Bottle
- The bottle (excluding the filter disc) is dishwasher safe (top rack only).
- Alternatively, wash by hand with warm, soapy water. Rinse thoroughly.
- Ensure all parts are completely dry before reassembling or storing.
Filter Disc Replacement
- Replace the MicroDisc filter approximately every 4 weeks or after filtering 60 liters of water, whichever comes first.
- To replace, unscrew the top lid, remove the old filter disc, and dispose of it.
- Insert a new, rinsed MicroDisc as described in the "Setup Instructions" section.
Image: A BRITA water filter pitcher and a separate filter disc, illustrating the filter component.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water tastes unusual or unpleasant. | Filter disc needs priming or replacement. | Rinse new filter disc thoroughly. If taste persists, replace the filter disc. |
| Bottle leaks. | Lid not screwed on tightly; mouthpiece not fully closed; damaged seal. | Ensure lid is securely tightened. Push mouthpiece down firmly. Check seals for damage and replace if necessary. |
| Water flow is slow. | Filter disc is clogged or nearing end of life. | Replace the filter disc. |
Specifications
- Brand: BRITA
- Model Name: S1200
- Material: Plastic (BPA Free)
- Bottle Type: Sports bottle
- Color: Blue
- Capacity: 0.6 Liters (600ml)
- Special Feature: Filter, Squeezable, Carry Loop
- Product Dimensions: 2.99"W x 10.04"H
- Product Care Instructions: Dishwasher Safe (excluding filter)
- Item Weight: 4.9 ounces (0.14 Kilograms)
Warranty and Support
For warranty information and customer support, please refer to the official BRITA website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
Official BRITA Website: www.brita.com
