Smartby EN2A27S Remote Control User Manual

Introduction

This manual provides instructions for the Smartby EN2A27S replacement remote control. It is designed to operate various Sharp 4K Ultra LED Smart HDTV models. Please read this manual carefully to ensure proper setup and operation of your remote control.

Setup

1. Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery cover downwards or outwards to open it.
3. Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Close the battery cover by sliding it back into place until it clicks securely.

The remote control is ready for use immediately after battery installation; no programming is required.

2. Compatibility

This remote control is compatible with the following Sharp 4K Ultra LED Smart HDTV models:

• 55H6B, 50H7GB, 50H6B, N6200U
• LC-40N5000U, LC-43N5000U, LC-43N6100U, LC-43N7000U
• LC-50N5000U, LC-50N6000U, LC-50N7000U
• LC-55N620CU, LC-55N5300U, LC-55N6000U, LC-55N7000U
• LC-60N5100U, LC-60N6200U, LC-60N7000U
• LC-65N5200U, LC-65N6200U, LC-65N7000U, LC-65N9000U
• LC-75N620U, LC-75N8000U
• LC40N5000U, LC43N5000U, LC43N6100U, LC43N7000U
• LC50N5000U, LC50N6000U, LC50N7000U
• LC55N620U, LC55N5300U, LC55N6000U, LC55N7000U
• LC60N5100U, LC60N6200U, LC60N7000U
• LC65N5200U, LC65N6200U, LC65N7000U, LC65N9000U
• LC75N620U, LC75N8000U

Operating Instructions

The Smartby EN2A27S remote control features a standard layout for intuitive operation of your Sharp Smart HDTV. Refer to the image below for button identification.

Image: Smartby EN2A27S Remote Control showing all buttons and a magnified view of the streaming service buttons.

Button Functions:

• Power (Red Button): Turns the television on or off.
• INPUT: Cycles through available input sources (e.g., HDMI 1, HDMI 2, TV).
• Number Pad (0-9): Directly enters channel numbers or menu selections.
• CC (Closed Captioning): Activates or deactivates closed captions.
• Dash (-): Used for selecting sub-channels (e.g., 7-1).
• Color Buttons (Red, Green, Yellow, Blue): These buttons have context-sensitive functions within TV menus or specific applications.
• Gear/Settings Button: Accesses the television's settings menu.
• Grid/Menu Button: Opens the main menu or smart TV interface.
• Navigation Pad (Up, Down, Left, Right, OK): Navigates through on-screen menus and confirms selections.
• BACK: Returns to the previous screen or menu.
• HOME (House Icon): Returns to the main smart TV home screen.
• EXIT: Closes the current menu or application.
• VOL +/-: Increases or decreases the television's volume.
• Mute (Speaker with X): Silences or restores the television's audio.
• Live TV: Switches the television to live broadcast mode.
• CH +/-: Changes the television channel up or down.
• Playback Controls (Rewind, Play/Pause, Fast Forward, Stop): Controls media playback functions.
• SLEEP: Activates or adjusts the sleep timer function.
• Quick Access Buttons (NETFLIX, amazon, VUDU, You Tube): Provides direct access to these popular streaming applications.

Troubleshooting

If you encounter issues with your Smartby EN2A27S remote control, please refer to the following common solutions:

• Remote Not Responding: Ensure the batteries are inserted correctly with the correct polarity (+/-). Replace old batteries with new AAA batteries.
• Line of Sight: Make sure there is a clear line of sight between the remote control and the TV's infrared sensor. Obstructions can block the signal.
• Battery Compartment Difficulty: If the battery compartment is stiff, apply gentle but firm pressure when sliding the cover. Avoid excessive force.
• No Programming Needed: This remote control is designed to work out of the box with compatible Sharp TVs without any programming. If it's not working, re-check battery installation and compatibility with your TV model.
• TV Power Cycle: Try unplugging your TV from the power outlet for a few minutes, then plug it back in. This can sometimes resolve minor communication issues.

Specifications

Customer Support

For any questions or assistance, please refer to the retailer where you purchased the product. Smartby offers a 30-day return policy for this product.