ULINE Deluxe Counting Scale User Manual

1. Introduction

Thank you for choosing the ULINE Deluxe Counting Scale. This precision instrument is designed for accurate weighing, parts counting, and various other measurement applications in industrial and scientific environments. This manual provides essential information for the proper setup, operation, and maintenance of your scale to ensure optimal performance and longevity.

2. Safety Information

• Always operate the scale on a stable, level surface to ensure accurate readings.
• Do not expose the scale to extreme temperatures, humidity, or direct sunlight. Operating temperature range: 32 - 104°F (0 - 40°C).
• Avoid dropping or subjecting the scale to sudden impacts, as this can damage internal components.
• Use only the provided AC adapter for power. Do not use unauthorized power sources.
• Keep the scale clean and free from dust and debris. Refer to the Maintenance section for cleaning instructions.
• This scale is not NTEP Approved, Measurement Canada Approved, or Legal for Trade.

3. Package Contents

Please verify that all items listed below are included in your package:

• ULINE Deluxe Counting Scale unit
• Stainless Steel Pan
• AC Adapter (12V, 500mA)
• Rechargeable Battery (6V/4Ah, pre-installed)
• User Manual (this document)

4. Setup

4.1 Unpacking and Placement

1. Carefully remove the scale and all accessories from the packaging.
2. Place the scale on a firm, level, and vibration-free surface. Ensure there is adequate space around the scale for operation and ventilation.
3. Install the stainless steel pan onto the scale platform.

4.2 Power Supply

The scale can be powered by the included AC adapter or its internal rechargeable battery.

• AC Power: Connect the AC adapter to the power input port on the scale and then plug it into a standard electrical outlet. The AC adapter cable length is 6 feet.
• Battery Power: The scale features a 6V/4Ah rechargeable battery, providing approximately 70 hours of continuous operation on a full charge. It takes about 12 hours to fully recharge the battery. The scale can be used while charging.

4.3 Initial Calibration Verification

Your ULINE Deluxe Counting Scale is calibrated before leaving the manufacturer's facility. However, vibrations during shipping may cause the scale to fall out of calibration. ULINE recommends re-verifying calibration in the field before first use. Refer to the Maintenance section for calibration steps.

Figure 1: ULINE Deluxe Counting Scale. This image shows the scale from an angled front view, highlighting its stainless steel platform, large LCD display, and numeric keypad with function buttons.

5. Operating Instructions

5.1 Basic Operation

1. Power On/Off: Press the ON/OFF button to turn the scale on or off.
2. Zeroing: Press the ZERO button to set the display to zero. This is useful before placing items on the platform.
3. Tare Function: Place an empty container on the platform, then press the TARE button. The display will show zero, allowing you to weigh only the contents.
4. Unit Conversion: Press the UNIT or MODE button to cycle through available weighing units: Pounds (LB), Kilograms (KG), Ounces (OZ), and Grams (G).

5.2 Application Modes

The scale supports five application modes:

• Weighing: Standard weight measurement.
• Parts Counting: Count a large number of identical items quickly.
  1. Place a known sample quantity (e.g., 10, 20, 50 pieces) on the platform.
  2. Enter the sample quantity using the numeric keypad.
  3. Press the SAMPLE or PCS button to confirm. The scale will calculate the average piece weight.
  4. Add more items, and the scale will display the total count.
• Check Counting: Set target count ranges for efficient batching.
• Check Weighing: Set target weight ranges for efficient batching.
• Accumulation: Sum multiple weighing or counting results.

5.3 Storing Item Weights/Counts

The scale can store weights or counts for up to 255 different items. Refer to the scale's on-screen menu or specific button functions for saving and recalling item data.

5.4 Display Features

The scale features a backlit LCD display for clear readability in various lighting conditions. The digit height is 2 inches, and the overall display dimensions are 6 1/2 x 2 1/2 inches (W x H). The scale also has an auto shut-off feature to conserve battery life when not in use.

6. Maintenance

6.1 Cleaning

To clean the scale, wipe the stainless steel pan and plastic housing with a soft, damp cloth. Do not use abrasive cleaners, solvents, or immerse the scale in water. Ensure no liquid enters the internal components.

6.2 Battery Charging

When the battery indicator shows low power, connect the AC adapter to recharge the internal 6V/4Ah battery. A full charge takes approximately 12 hours and provides up to 70 hours of operation.

6.3 Calibration

Regular calibration ensures the accuracy of your scale. Refer to the scale's on-screen prompts or a dedicated calibration button sequence (often involving pressing a specific key during power-on) for calibration procedures. You will need certified calibration weights for this process. If you are unsure, contact ULINE support.

7. Troubleshooting

8. Specifications

Figure 2: Dimensions of the ULINE Deluxe Counting Scale. This image illustrates the overall width (14.88 inches), depth (14.38 inches), and height (5.25 inches) of the scale.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact ULINE customer service. Keep your purchase receipt and product serial number handy when contacting support.

Visit the official ULINE website for the most up-to-date contact information and resources.