1. Important Safety Information
Read and understand all instructions before operating this snow thrower. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
- Always wear appropriate protective gear, including gloves and eye protection, when operating this powerful snow thrower.
- Keep hands and other body parts away from the auger and chute while in operation.
- Always unplug the machine and allow it to stop completely before performing any maintenance or cleaning.
- Ensure the work area is clear of debris and obstacles before starting.
- Do not operate the snow thrower on steep slopes.
- Never leave the snow thrower unattended while it is running.
2. Product Overview
The Greenworks Pro 80V 20-Inch Cordless Snow Thrower is designed for efficient and quiet snow removal. It features a high-performance brushless motor and a robust 80V lithium-ion battery system.
Image: Greenworks Pro 80V 20-Inch Cordless Snow Thrower
Key Features:
- Ultimate Performance 80V Li-ion System: Delivers greater efficiency with up to 45 minutes of run time with a 2.0 Ah battery.
- Quiet, Maintenance-Free Brushless Motor Technology: Provides powerful performance with reduced noise and no need for gas or oil.
- Rapid Charge: Battery charges to full capacity in approximately 30 minutes.
- One Battery, Multiple Tool Compatibility: The 80V battery system is interchangeable with other Greenworks 80V tools.
Image: Overview of the Greenworks Pro 80V 20-Inch Brushless Snow Thrower highlighting its features.
Image: Close-up of the auger-assist system, designed to break heavy snow and ice.
3. Setup
3.1. Assembly
Your snow thrower may require minor assembly. Refer to the included assembly guide for detailed steps. Typically, this involves attaching the handle and chute assembly.
3.2. Battery Installation
- Ensure the battery is fully charged before first use.
- Locate the battery compartment on the snow thrower.
- Slide the 80V battery into the compartment until it clicks securely into place.
- Close the battery compartment cover to protect the battery from snow and moisture.
Image: Handle assembly showing the double safety design for secure operation.
4. Operating Instructions
4.1. Starting the Snow Thrower
- Ensure the battery is installed and fully charged.
- Press and hold the safety button.
- While holding the safety button, pull the bail switch towards the handle. The auger will begin to rotate.
- Release the safety button once the motor is running.
4.2. Clearing Snow
- Push the snow thrower forward at a steady pace. Avoid forcing the machine through heavy snow.
- For deep or heavy snow, clear a narrower path or make multiple passes.
- The 20-inch clearing width and 10-inch clearing depth are designed for efficient removal of typical snowfall.
4.3. Chute Adjustment
The snow thrower features a 180-degree directional control chute, allowing you to direct snow up to 25 feet away. Use the chute crank to adjust the direction of snow discharge as needed.
Image: Cordless operation of the snow thrower, demonstrating ease of use without cords.
Image: Snow thrower in action, emphasizing its quiet operation.
Image: Examples of wide applications for the snow thrower, including driveways, walkways, and sidewalks.
5. Maintenance
Regular maintenance ensures optimal performance and extends the life of your snow thrower.
5.1. General Care
- After each use, clear any remaining snow or ice from the auger, chute, and housing.
- Inspect the auger blades for wear or damage. Replace if necessary.
- Check all fasteners for tightness and tighten if loose.
- Store the snow thrower in a dry, protected area when not in use.
5.2. Battery Care
- Always store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Charge batteries fully before storing for extended periods.
- Do not expose batteries to water or moisture.
6. Troubleshooting
If you encounter issues with your snow thrower, consult the following common solutions:
- Snow Thrower Not Starting: Ensure the battery is fully charged and properly seated. Check that the safety button and bail switch are engaged correctly.
- Reduced Performance: Verify the battery charge level. Clear any clogs in the auger or chute. Ensure the auger blades are not worn or damaged.
- Unusual Noise/Vibration: Immediately stop the machine and inspect for loose parts or foreign objects in the auger area.
For persistent issues, contact Greenworks customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Greenworks |
| Model | 80V 20-Inch Cordless Snow Thrower |
| Power Source | Battery Powered (80V Lithium-Ion) |
| Engine Type | Electric (Brushless Motor) |
| Clearing Width | 20 Inches |
| Clearing Depth | Up to 10 Inches |
| Snow Discharge Distance | Up to 25 Feet |
| Chute Rotation | 180 Degrees |
| Color | Green |
8. Warranty & Support
Greenworks products are built to last and come with a comprehensive warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical support, replacement parts, or warranty claims, please contact Greenworks Customer Service:
- Website: www.greenworkstools.com
- Phone: Refer to your product packaging or the Greenworks website for the most current contact number.
Image: The Greenworks 80V battery platform, compatible with over 50 tools.
