Invicta Men's 24214 Speedway Analog Display Quartz Two Tone Watch

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Invicta Men's 24214 Speedway Analog Display Quartz Two Tone Watch. Please read this manual thoroughly to ensure proper use and care of your timepiece.

Initial Setup

Figure 1: Front view of the Invicta Men's 24214 Speedway Watch.

Setting the Time

1. Pull the crown out to position 2.
2. Turn the crown to set the hour and minute hands to the desired time.
3. Push the crown back to position 0.

Setting the Date and Day

1. Pull the crown out to position 1.
2. Turn the crown clockwise or counter-clockwise to adjust the date and day sub-dials.
3. Once the correct date and day are displayed, push the crown back to position 0.

Adjusting the Bracelet

The stainless steel bracelet can be adjusted by adding or removing links. This procedure typically requires specialized tools and should be performed by a qualified watch technician to prevent damage to the bracelet or watch.

Operating Your Watch

Basic Timekeeping

Your Invicta 24214 watch features a precise quartz movement for accurate timekeeping. The main hands display hours, minutes, and seconds. The sub-dials provide additional functions including a 24-hour display, day of the week, and date.

Using the Chronograph Function

The watch is equipped with a chronograph function for measuring elapsed time. The pushers on the side of the case control this function.

1. Start/Stop: Press the upper pusher to start the chronograph. Press it again to stop.
2. Reset: While the chronograph is stopped, press the lower pusher to reset all chronograph hands to their zero positions.

Water Resistance

This watch is water resistant to 100 meters (330 feet). This rating makes it suitable for swimming and snorkeling. It is not recommended for diving activities. Ensure the crown is fully pushed in to position 0 before any contact with water to maintain water resistance. Avoid operating the pushers or crown while the watch is wet or submerged.

Care and Maintenance

Cleaning

To maintain the appearance of your watch, wipe the case and bracelet regularly with a soft, dry cloth. For water-resistant models, a slightly damp cloth can be used, followed by a dry cloth. Avoid using chemical cleaners, as they may damage the watch's finish.

Battery Replacement

Your quartz watch is powered by a battery. When the battery life expires, the watch will stop running. Battery replacement should be performed by a qualified watchmaker or authorized service center to ensure the watch's water resistance and proper function are maintained.

Storage

When not wearing your watch, store it in a cool, dry place away from direct sunlight and extreme temperatures. Keeping it in its original box or a watch case can help protect it from dust and scratches.

Troubleshooting

Watch Not Running

• Check if the crown is fully pushed in to position 0.
• If the watch is a quartz model and has stopped, the battery may need replacement. Consult a professional watch technician.

Incorrect Time or Date

• Refer to the "Setting the Time" and "Setting the Date and Day" sections to correctly adjust the watch.
• Ensure the crown is securely pushed back into position 0 after setting.

Product Specifications

Warranty and Customer Support

Invicta watches typically come with a manufacturer's warranty covering defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your watch or visit the official Invicta website. For service, repairs, or further assistance, please contact Invicta customer support or an authorized service center.

You can find more information and support by visiting the Invicta Store on Amazon.