Introduction
The Mio MiVue M560 is a compact, lightweight, and waterproof dashcam designed for two-wheeled vehicles such as motorcycles, scooters, and bicycles. It serves as a reliable eyewitness on the road, capturing your journeys in high definition. Equipped with a high-quality Sony optical sensor, it provides optimal visibility and enhanced image quality, even in low-light conditions. This manual provides essential information for setting up, operating, and maintaining your MiVue M560 dashcam.
Image: Mio MiVue M560 Dashcam product box.
What's in the Box
Upon opening the package, ensure all the following items are present:
- Mio MiVue M560 Rider Cam
- Waterproof USB charging cable
- GoPro-compatible helmet mount
- Quick Start Guide
Setup
- Charging the Device: Before first use, fully charge the MiVue M560 using the provided waterproof USB charging cable. Connect the cable to the camera and a compatible USB power source. The charging indicator will show the charging status.
- Inserting a MicroSD Card: The device requires a MicroSD card (not included) for recording. Open the MicroSD card slot cover, insert a high-speed MicroSD card (Class 10 or higher, up to 128GB recommended) with the contacts facing down, and close the cover securely.
- Mounting the Camera: Use the GoPro-compatible helmet mount to securely attach the camera to your helmet or another suitable location on your vehicle. Ensure the camera has a clear, unobstructed view of the road ahead. Adjust the angle for optimal recording.
- Powering On/Off: Press and hold the power button to turn the device on or off.
- Initial Settings: Upon first power-on, you may need to set the date, time, and other preferences. Refer to the Quick Start Guide for detailed instructions on navigating the menu.
Image: Mio MiVue M560 Dashcam with its lens visible.
Operating Instructions
- Automatic Recording: Once powered on and a MicroSD card is inserted, the MiVue M560 will automatically begin recording. Video files are typically saved in segments.
- Manual Recording/Event Recording: The device may feature a button for manual event recording, which saves a protected video segment that will not be overwritten. Consult your Quick Start Guide for specific button functions.
- Loop Recording: The dashcam uses loop recording, meaning when the MicroSD card is full, the oldest unprotected files will be overwritten by new recordings.
- Viewing Recordings: To view recorded videos, remove the MicroSD card from the device and insert it into a computer using a card reader. Alternatively, some models may allow direct connection to a computer via USB.
- Settings Adjustment: Access the device's menu to adjust settings such as video resolution (1080p HD is supported), exposure, date/time, and G-sensor sensitivity.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid abrasive cleaners or solvents. Ensure the device is off and disconnected from power before cleaning.
- Firmware Updates: Periodically check the official Mio website (www.mio.com) for available firmware updates. Keeping your device's firmware up-to-date ensures optimal performance and access to new features.
- MicroSD Card Management: Format the MicroSD card regularly (e.g., once a month) using the camera's menu option to maintain optimal recording performance and prevent data corruption. Back up important files before formatting.
- Storage: When not in use, store the dashcam in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Device does not power on. | Ensure the battery is charged. Connect to a power source and try again. Check the power cable for damage. |
| Recording stops unexpectedly. | Check if the MicroSD card is full or corrupted. Format the MicroSD card. Ensure a high-speed (Class 10 or higher) MicroSD card is used. |
| Video quality is poor. | Clean the camera lens. Ensure the protective film (if any) has been removed. Check video resolution settings. Record in well-lit conditions. |
| Device is unresponsive. | Perform a soft reset by pressing and holding the power button for an extended period (e.g., 10-15 seconds). If available, use a reset pinhole. |
| Files are not saving. | Verify the MicroSD card is properly inserted and not full. Format the card. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Mivue M560 |
| Video Recording Resolution | 1080p HD at 30 fps |
| Lens | F1.8 Glass Lens, 130-degree wide-angle |
| Sensor | High-quality Sony optical sensor |
| Connectivity | USB (for charging and data transfer) |
| Special Features | Low light performance, Waterproof design |
| Battery | Lithium-ion (up to 2.5 hours recording time) |
| Dimensions | 9.1 x 3 x 9 cm |
| Weight | 77 g |
Warranty and Support
For warranty information, technical support, and further assistance, please visit the official Mio website or contact their customer service. Details regarding warranty periods and service procedures are typically provided with your product documentation or available online.
Official Website: www.mio.com
