Product Overview
The WMYCONGCONG Game Joystick Breakout Module is a versatile component designed for various electronic projects, including game controllers and robotics. This module provides both analog and digital outputs, allowing for precise control and feedback. It is constructed from durable ABS plastic and features a standard 2.54mm pin connector for easy integration into existing circuits.
Figure 1: Overview of ten WMYCONGCONG Game Joystick Breakout Modules.
Setup and Connections
The joystick module features a 5-pin connector for power, ground, analog X and Y axis outputs, and a digital switch output. Proper connection is crucial for correct operation.
- +5Vcc: Connect to a 5V power supply.
- GND: Connect to the ground of your circuit.
- VRx: Analog output for the X-axis (horizontal movement).
- VRy: Analog output for the Y-axis (vertical movement).
- SW: Digital output for the push-button switch integrated into the joystick.
Figure 2: Detailed views of the joystick module, highlighting the connection pins.
The module uses a 5V power supply. In its original, centered state, the VRx and VRy pins will typically read a voltage of approximately 2.5V. Moving the joystick will cause the voltage to vary between 0V and 5V depending on the direction and extent of movement.
Operating Instructions
The joystick provides bi-directional control for two axes (X and Y) and a push-button switch. The analog outputs (VRx and VRy) are connected to 10k potentiometers, meaning the resistance changes as the joystick is moved, which in turn alters the voltage output.
- Analog Control: Move the joystick horizontally to control the X-axis and vertically for the Y-axis. The voltage output on VRx and VRy pins will correspond to the joystick's position.
- Digital Switch: Press down on the joystick to activate the integrated push-button switch. This provides a digital signal (typically high or low, depending on wiring and pull-up/down resistors) via the SW pin.
This module is ideal for applications requiring precise analog input, such as controlling robotic arms, navigating menus, or providing directional input in custom game controllers.
Maintenance
The WMYCONGCONG Joystick Breakout Module is designed for durability. To ensure its longevity and optimal performance:
- Cleaning: If necessary, gently wipe the module with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
- Handling: Handle the module by its edges to avoid damaging the electronic components or bending the pins.
- Power Considerations: This module is NOT designed for high current applications. Ensure your circuit's current draw is within safe limits for the module.
- Storage: Store in a dry, dust-free environment away from extreme temperatures.
Troubleshooting
If you encounter issues with your joystick module, consider the following:
- No Output/Incorrect Readings:
- Verify all connections (+5Vcc, GND, VRx, VRy, SW) are secure and correctly wired.
- Ensure your power supply is providing a stable 5V.
- Check for any short circuits or damaged components on the module or breadboard.
- Non-Linear or Erratic Readings:
- While the module provides analog output, some variations in linearity may occur. Ensure your microcontroller's analog-to-digital converter (ADC) is properly configured.
- Consider adding small capacitors across the analog input pins to smooth out readings if experiencing noise.
- Switch Not Responding:
- Confirm the SW pin is correctly connected and that your circuit includes appropriate pull-up or pull-down resistors if necessary for digital input.
- Ensure the joystick is pressed firmly enough to activate the switch.
Specifications
| Feature | Detail |
|---|---|
| Brand | WMYCONGCONG |
| Model Number | 13 |
| Material | ABS Plastic |
| Dimensions (L x W x H) | 37mm x 25mm x 32mm (1.46 x 0.98 x 1.26 inches) |
| Weight | Approximately 15g (0.53 ounces) per module |
| Connector Type | Standard 2.54mm pin header |
| Operating Voltage | 5V DC |
| Output Type | Analog (VRx, VRy), Digital (SW) |
| Potentiometer Resistance | Bi-directional 10kΩ resistor |
| Package Content | 10 x Joystick Breakout Modules |
Warranty and Support
Specific warranty information for the WMYCONGCONG Game Joystick Breakout Module is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please refer to the seller or manufacturer's official website or contact their customer service directly.
Manufacturer: WGCD
For further assistance, you may also visit the WMYCONGCONG Store on Amazon.
