1. Introduction
This manual provides instructions for the Dynex ZRC-400 LCD TV Remote Control. This remote is designed as a direct replacement for various Dynex LCD TV models, ensuring seamless operation without complex programming.
Compatible Dynex TV Models:
- DX-15L150A11
- DX-19L150A11
- DX-22L150A11
- DX-37L200A12A
- DX-40L130A11
- DX-40L150A11
- DX-40L261A12
- DX-42E250A12
- DX-46L150A11
- DX-46L260A12
- DX-46L261A12
- DX-46L262A12
- DX-46L262A12A
2. Setup
2.1 Battery Installation
The Dynex ZRC-400 remote control requires two (2) AAA batteries for operation. Ensure correct polarity when inserting batteries.
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off.
- Insert two AAA batteries, matching the (+) and (-) terminals inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image 1: Back view of the Dynex ZRC-400 remote control, illustrating the battery compartment cover. This is where two AAA batteries are inserted.
The remote is ready for use immediately after battery installation. No programming is typically required for compatible Dynex TV models.
3. Operating Instructions
Point the remote control directly at the TV's infrared sensor. Ensure there are no obstructions between the remote and the TV.
Image 2: Front view of the Dynex ZRC-400 remote control, displaying all functional buttons.
3.1 Button Functions
| Button | Function |
|---|---|
| POWER | Turns the TV on or off. |
| INPUT | Selects the video input source (e.g., HDMI, Video, TV). |
| 0-9, RECALL | Direct channel selection. RECALL returns to the previous channel. |
| INFO | Displays current channel information. |
| GUIDE | Accesses the electronic program guide (if available). |
| MENU | Opens the TV's main menu. |
| ENTER | Confirms selections within menus. |
| Navigation Arrows (Up, Down, Left, Right) | Navigates through menus and options. |
| EXIT | Exits the current menu or on-screen display. |
| MUTE | Mutes or unmutes the TV audio. |
| VOL+ / VOL- | Increases or decreases the volume. |
| CH^ / CHv | Changes the channel up or down. |
| FAVORITE | Accesses favorite channels (if configured on TV). |
| VIDEO, HDMI, TV | Direct selection of specific input sources. |
| COMP, MTS/SAP, VGA | Additional input source selections. |
| ZOOM, SLEEP, CH-LIST | Special functions: Zoom picture, Sleep timer, Channel list. |
| PICTURE, AUDIO, CCD | Accesses picture settings, audio settings, and Closed Captioning (CCD). |
4. Maintenance
4.1 Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
4.2 Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials, as these can damage the remote's surface or internal components.
4.3 Storage
When not in use for extended periods, remove the batteries to prevent leakage, which can damage the remote. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote control and the TV's infrared sensor.
- Confirm you are pointing the remote directly at the TV.
- Specific buttons not working:
- Clean the remote control, especially around the problematic buttons, to remove any dirt or debris that might be preventing proper contact.
- If cleaning and battery replacement do not resolve the issue, the remote may be damaged and require replacement.
- TV not responding to input changes:
- Ensure the TV is powered on.
- Verify that the remote is compatible with your specific Dynex TV model (refer to the Introduction section).
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | ZRC-400 |
| Brand | Dynex |
| Connectivity Technology | Infrared |
| Compatible Devices | Television (Specific Dynex LCD TV models) |
| Batteries Required | 2 AAA batteries |
| Product Dimensions | 8 x 2 x 1 inches |
| Item Weight | 1.6 ounces |
| Manufacturer | DYNEX Parts |
| Date First Available | November 25, 2016 |
7. Warranty and Support
Information regarding specific warranty terms or direct manufacturer support for the Dynex ZRC-400 remote control is not available in this manual. Please refer to your original product packaging or the Dynex website for further details.
